Love your vids bro. I'm working for crash champions as painter as well we just switched from 90 line to 100 line last week. I prefer the 90 line over 100 but both nice products. BUT I'm diehard ppg glasruit has not changed my mind sorry crash but in all honesty ppg rules lol
You definitely have to shoot the Glasurit 923-210 Ultimate clear. All of the resto guys (Goolsby Customs/Chip Foose/TheHotRodShop) shoot the 923-210 and/or the 923-460. The guy at TheHotRodShop mentioned to mix it in a 3/1 ratio instead of the 2/1 ratio for the Glasurit 923-210. He mentioned you can really get it to flow out like a Glamour clear and buffability is incredible. The 923-109 was specifically formulated for countries like New Zealand and Australia with ultra high UVs. So it will definitely be a top clear for a BASF Carizzma candy or a Florida/Arizona/Nevada car that will get a lot of sunlight. BTW, Bmw, Mercedes, and Porsche are still shooting Glasurit on their cars from the factory in Germany. You can also do a review on the BASF RM 5335 Glamour clear as well. Shoot it in a 3/1 ratio not the 4/1. That's another BASF clear that lays out absolutely spectacular.
There are so many clear's out there now its madness to pick one anymore you truly like when lots of them laydown nice and imo there is no best clear anymore with so many of them being so good now
We have a diamont system at my shop and got some of the 460 clear to try and I’ll say this it’s awesome stuff. I was using 5600 clear which sprays good but it will pinch back. 460 still looked wet 3 days after spraying it. Looking to try the 109 now after seeing this video
These finishes look wet and stay that way! These products have changed since I painted in the early 80s but a change definitely for the best! Thank you Candyman for taking the time to produce these great videos 😎👍
That job turned out really well, I like the look of that clear. Something I never thought about was how the cut and buff process took off a layer of resins that didn't exist below it. Makes sense, just learned something new. Thanks again Kandy Man!
I'm impressed that a large "corporate conglomerate" like Crash Champions is removing parts to spray and I'm guessing you're doing full uni-sides if a quarter panel repair/respray is involved ? I miss spraying Glasurit, sprayed 90/55 line for the last 5 years, currently using Sikkens, and it's just not the same level. Loved 923-365 clear and also sprayed a lot of 255 and 460. Great channel btw.
I just ordered 2 luma guns and light because of you and your results and must say I have been overwhelmed at how much better they spray than my sata guns...
I'm from Brazil and i really like your channel, I learn a lot by watching your videos. Recently TH-cam unsubscribed me from the channel, I don't know what happened and it took me a while to find your channel again. I hope this doesn't happen again because it's bad not being able to watch the videos.
Number one your work is outstanding one hell of a painter. You have had a chance to spray some of the best clears from PPG and glasirit! What would you suggest top clear for a custom and restoration shop where time is not an issue or baking available?
Hey Candyman, love the video. I’m getting ready to spray 100 line on Monday and I got the Luma guns but I used the 1.3 for base and the 1. 5 for clear. Have you ever use 1.5 for clear or you only use 1.3 for base and clear.
We don’t spray much of the matte clear at my shop but if it sits in the mixing bank for a while I’ve found it’s best to strain it before hand. Seems to get kinda seedy after a while. Spraying 90 line
Hi KANDYMAN cracking video good question for you whats the best spray gun for base coat paint and clear coat paint iwatta 1.3 WS400 1.3 OBS BLUE CAP series 2 for base coat paint and the iwata series digital clear 1 3 HD or sagola extreme aqua 4600 1.3 and titania pro cap 😀
Very... nice job brother, I used glasurit from 2005 to 2009 and Diamond ,solvent both but I like Diamond the most because glasurit was to thick but that time ,I still having Diamond in my shop like spare paint but I switch the NXT to Envirobase like I mentioned the other day we are using 2021 and 2002 clears from PPG but that Glasurit clear blows my mind, my best regards my friend nice job and great information. 😊
Any time brother your are a great painter thanks for share with others your knowledge, I'm a combo that came frome Cuba 20 years ago and nobody believes in me at the beginning but now I have a good reputation but I always learn from you my friend. Family shop in Lakeland fl at your service. "Lakeland Collision 2740 Industrial Park Dr LAKELAND Fl.
on shop coats,, Sales guy told us " shop" /Lab coats go 1/2 way down your thigh, "Counterman" ones only go down to about 3/4 of your pocket. , Guys are using dress pants from interfaith stores too.. dont stick to your leg, and squirming around in and out of a vehicle no binding up on you. no sweating as much either, and have the elastic band,
109 is a nice clear. If you have to cut and buff do it in the first 72 hours or it will fight you with the flex. You'll dig the matte clear. Not as easy as Akzo but good results, no clouding.
Hi Kandy Man, all I can say is WOW!! that clearcoat is truly amazing and the finish is super flat but of course all that was achieved by the person behind the gun😁I do like those guns I had the Finer Core version which is the same gun and it sprays really nice👌 I remember someone told me that I should get certified but I don't think they meant for my skills as a painter🤔😜🤪😂John UK
Looks fantastic really nice, BMW factory orange peel is my favourite production car finish, it looks like it always got a good amount of product on it and its nice and chunky compared to some other car makes, great feeling when its when its out the gun and matches the rest of the car, Nice job man 👍
Its a nice clear can this clear do overall paint jobs .When can buff this clear . I would you to try the 923-255. Its old technology but its some good stuff. Keep the good work up
Amazing paint line for sure, do you like the Luma better for clear than the WS400 series 2. Never handled any luma products, don’t want to waste money. Thanks again.
109 clear is the closest clear I have used to the old 923-54 clear they had way back in 90s that was the best clear ever besides PPG old 2001 period the Glasruit 923-54 was the best period
That glasruit is trash..... sorry. I was being trained and we put a coat of paint on and took lunch and it was still wet after an hour when we got back. Having to put sealer on and wait 15 mins and using a shaker to mix the thick af paint is just terrible. I used ppg and never understood why so many shops are against waterborne paint until I used this. I personally feel ppg is far superior to this. The 1 and a half gimmick sells up front to a desk painter until youre putting on 4 or so layers to blend a pearl. Im glad you like it but I think it's terrible paint. I feel like I got jobs out in half the time with ppg with better coverage. Plus I love the deltron lineup. No offense at all about what you like but it's just my 2 cents that mean less than a cent lol.
@kandyman5315 just an opinion. We could smash deltron on and out the door in 10mins. Personally if someone said they use these other waterborne paints I would walk back out the door. When companies want more money but the products take way way more time It just doesn't make sense. Our dealership did the same thing with the switch and the product was more money and the process took an extra 30+ mins if not more. The owner got a kick back for putting the product in the shops but demanded faster production. It's not rocket science. You really don't think it takes alot longer to paint with? During my training with this stuff it took us over 5 hours to do 1 car and it wasn't a tri coat. It was still messed up in the end and blended out like garbage.
@theirishman088 I've always been a big fan of Ppg and I was skeptical when we switched to Glasurit. But, I can honestly say it is a better product and I do the same hours with both lines. Yes, there is a learning curve, but that is to be expected when learning a new paint line.
Trash… I guess that’s why Rolls, Ferrari, Porsche, many of the high end makes come with Glasurit from the factory. Glasurit is the best, RM and Sikkens will absolutely stand their ground as well up with Glasurit. I’m out of the collision industry, and now only in the restoration world. PPG is nice paint for sure, but not in the same league. I’ve sprayed both lines for years. We offered PPG as a cost effective alternative to Glasurit, but phased out. Never looked back. Now nothing but the Parrot.
@@zacrs4do they come with a Louis Vuitton purse also?? Wow, if a high end auto manufacturer uses it it must be good. Thank you for correcting me. I mean anyone who doesn't buy a high end car is just getting a crap paint job. Now that I think of it when I was in sales for crap like American cars people always said the paint was low quality and never looked as good as the Ferrari so instead of the impala they bought a the testarossa. It's a personal opinion. People get hung up on "you only need 1 and a half coats!" The guy that was training me said that and we had horrible results and put more on than we would have with any other product. I never understood why almost every shop would say we don't want water in our shops period and after seeing this stuff I totally understand. We are all here to make money not make money up front. If the company switched their paint line tomorrow the next one would be the best.. company man is more like it. You can spray anything like glass but the cars coming into the shops are no where close to it and I don't think that's a Ferrari or a rolls in the thumbnail. If you like it then congrats I personally think it's not a great product just like you think this is better than anything out there.
GET YOUR LUMA Ill ITEMS NOW! USE CODE kandyman7 AT CHECKOUT
lumaiii.com/?rfsn=7637088.989228
Love your vids bro. I'm working for crash champions as painter as well we just switched from 90 line to 100 line last week. I prefer the 90 line over 100 but both nice products. BUT I'm diehard ppg glasruit has not changed my mind sorry crash but in all honesty ppg rules lol
Looks like you always stay pretty busy at your shop. If you don't mind me asking what is your daily goal for hrs produced?
Best glasurit clear is the 923-255 clear coat.
You definitely have to shoot the Glasurit 923-210 Ultimate clear.
All of the resto guys (Goolsby Customs/Chip Foose/TheHotRodShop) shoot the 923-210 and/or the 923-460.
The guy at TheHotRodShop mentioned to mix it in a 3/1 ratio instead of the 2/1 ratio for the Glasurit 923-210. He mentioned you can really get it to flow out like a Glamour clear and buffability is incredible.
The 923-109 was specifically formulated for countries like New Zealand and Australia with ultra high UVs. So it will definitely be a top clear for a BASF Carizzma candy or a Florida/Arizona/Nevada car that will get a lot of sunlight.
BTW, Bmw, Mercedes, and Porsche are still shooting Glasurit on their cars from the factory in Germany.
You can also do a review on the BASF RM 5335 Glamour clear as well. Shoot it in a 3/1 ratio not the 4/1. That's another BASF clear that lays out absolutely spectacular.
There are so many clear's out there now its madness to pick one anymore you truly like when lots of them laydown nice and imo there is no best clear anymore with so many of them being so good now
I always hear nothing but the best things about Glasurit.
I sprayed Glasurit in the early 90's and have to say it is the best paint line I had ever used. Expensive, but nothing lays flatter.
My exact comment! High end finishes that were amazing even in the eighties when I painted!!
Except color matches suck unless it’s a European brand.
It took me few years to realize with the 54 line paint them send em home no buffing those cars still look good today
We have a diamont system at my shop and got some of the 460 clear to try and I’ll say this it’s awesome stuff. I was using 5600 clear which sprays good but it will pinch back. 460 still looked wet 3 days after spraying it. Looking to try the 109 now after seeing this video
Watching you back in Scotland… miss you 😢
@annspano3594 love you
Outstanding results. Well done Kandy Man.
Beautiful ! grew up in 80s 54 and 21 line.
My first paint job was on my 1962 impala with my Father we used all ppg primers base coat with Glasurit clear
These finishes look wet and stay that way! These products have changed since I painted in the early 80s but a change definitely for the best! Thank you Candyman for taking the time to produce these great videos 😎👍
Thank you
That job turned out really well, I like the look of that clear.
Something I never thought about was how the cut and buff process took off a layer of resins that didn't exist below it. Makes sense, just learned something new. Thanks again Kandy Man!
👍👍
You smashed it! Factory finish💪🏻💪🏻💪🏻
Love How Clean The Paint Room Is...
I'm impressed that a large "corporate conglomerate" like Crash Champions is removing parts to spray and I'm guessing you're doing full uni-sides if a quarter panel repair/respray is involved ? I miss spraying Glasurit, sprayed 90/55 line for the last 5 years, currently using Sikkens, and it's just not the same level. Loved 923-365 clear and also sprayed a lot of 255 and 460. Great channel btw.
Yes we do take off parts .and spray full unisides. It's the best way
@@kandyman5315 Absolutely the best way, too bad there are very few shops doing quality repairs like that.
Beautiful clear coat...thanks for sharing
Thank you dude I work for crash also this help out a lot
I just ordered 2 luma guns and light because of you and your results and must say I have been overwhelmed at how much better they spray than my sata guns...
They are great guns
I'm from Brazil and i really like your channel, I learn a lot by watching your videos. Recently TH-cam unsubscribed me from the channel, I don't know what happened and it took me a while to find your channel again. I hope this doesn't happen again because it's bad not being able to watch the videos.
Welcome back!
Number one your work is outstanding one hell of a painter. You have had a chance to spray some of the best clears from PPG and glasirit! What would you suggest top clear for a custom and restoration shop where time is not an issue or baking available?
Ppg 5050 is a great clear and for the glasurit. 923-460 and 109 clear are both top of the line
Awesome man thanks for the input and also keeping us guys in the loop on new products that we may not hear about otherwise!@@kandyman5315
Hey Candyman, love the video. I’m getting ready to spray 100 line on Monday and I got the Luma guns but I used the 1.3 for base and the 1. 5 for clear. Have you ever use 1.5 for clear or you only use 1.3 for base and clear.
Yes I've used both. But lately 1.3 for both base and clear
It looks like it lays down so nicely, good clean job
Thank you for everything you teach us!! Definitely want to try out those Luma guns in the future. Still pushin the first gen WS400 workhorse lol
Glasurit is taking over lately. All the crash champions in SoCal which to glasurit 100 line recently. Even Fix autos 90 line
We don’t spray much of the matte clear at my shop but if it sits in the mixing bank for a while I’ve found it’s best to strain it before hand. Seems to get kinda seedy after a while. Spraying 90 line
Thanks for the insight
basf told us not to put the matte on the mixing rig because of that. just keep the can closed and shake it every time before you use it.
Awesome job brother! Thanks for you time!
you inspire me to be better, thanks for this great video!!!!!🙌🏼
Thank you
Hi KANDYMAN cracking video good question for you whats the best spray gun for base coat paint and clear coat paint iwatta 1.3 WS400 1.3 OBS BLUE CAP series 2 for base coat paint and the iwata series digital clear 1 3 HD or sagola extreme aqua 4600 1.3 and titania pro cap 😀
Very... nice job brother, I used glasurit from 2005 to 2009 and Diamond ,solvent both but I like Diamond the most because glasurit was to thick but that time ,I still having Diamond in my shop like spare paint but I switch the NXT to Envirobase like I mentioned the other day we are using 2021 and 2002 clears from PPG but that Glasurit clear blows my mind, my best regards my friend nice job and great information. 😊
Thanks for the support and feedback
Any time brother your are a great painter thanks for share with others your knowledge, I'm a combo that came frome Cuba 20 years ago and nobody believes in me at the beginning but now I have a good reputation but I always learn from you my friend. Family shop in Lakeland fl at your service. "Lakeland Collision 2740 Industrial Park Dr LAKELAND Fl.
on shop coats,, Sales guy told us " shop" /Lab coats go 1/2 way down your thigh, "Counterman" ones only go down to about 3/4 of your pocket. , Guys are using dress pants from interfaith stores too.. dont stick to your leg, and squirming around in and out of a vehicle no binding up on you. no sweating as much either, and have the elastic band,
109 is a nice clear. If you have to cut and buff do it in the first 72 hours or it will fight you with the flex. You'll dig the matte clear. Not as easy as Akzo but good results, no clouding.
Thanks for the insight 👍
Kandy man does it the best. Hopefully one day I catch up with him :D
Came out amazing. For the money, you can’t beat the exodus guns 🤘
I agree 👍
Hi Kandy Man, all I can say is WOW!! that clearcoat is truly amazing and the finish is super flat but of course all that was achieved by the person behind the gun😁I do like those guns I had the Finer Core version which is the same gun and it sprays really nice👌
I remember someone told me that I should get certified but I don't think they meant for my skills as a painter🤔😜🤪😂John UK
Lol 👍 😆
Your spray booth is massive
You some kind of clear coat mad scientist.
I like Luma products your new sponsors.
I did a repair on the rear end of a 1 of 30 BMW M5 30th anniversary and this was the clear that was required except it was matted
That blue reminds me of the midnight blue I sprayed on a offshore not too long ago.
I love Glasurit paint & clear when I can afford it. I like Sikkens too
That's just amazing results and beautiful work as always.. can you tell me the psi for base and clear you use and was it fan all the way open?
Wide open fan and fluid psi 25
have any videos on best clear ten yrs down the road? for people keeping their vintage iron for decades.
This clear will last for sure
Looks fantastic really nice, BMW factory orange peel is my favourite production car finish, it looks like it always got a good amount of product on it and its nice and chunky compared to some other car makes, great feeling when its when its out the gun and matches the rest of the car, Nice job man 👍
@@TheHumblePaintSprayer333 👊👊
Think Audi has better?
@@fufefufkalo8394 Yes your right Audis are nice and flat and good build , i just like the chunky finish on BMWs 👍
Its a nice clear can this clear do overall paint jobs .When can buff this clear . I would you to try the 923-255. Its old technology but its some good stuff. Keep the good work up
I've been looking into that Luma/ Meiji finer core spray gun for a while, what nozzle size are you using?
1.3
What kind of paint are you using? Glasurit as well?
Yes glasurit 100line
Amazing paint line for sure, do you like the Luma better for clear than the WS400 series 2. Never handled any luma products, don’t want to waste money. Thanks again.
I have been really loving the Luma exodus lately
What is the gun set up and air pressure you sprayed the Luma exodus with? Loki’s amazing I’m gonna come meet you with Patrick.
24 -25 psi
Kandyman what pressure are you using with the ws-400 series 2?
29
@@kandyman5315 you have the digital or non-digital?
Hey kandyman, what side tips are you using for the sealer, base, and clearcoat on those luma guns?
1.3
Great Tip with The Light...
👍
What size is those individual booths I'm building a larger booth 18×30
Does that clear need a bake cycle
Loved glasurit unfortunately my paint store that sells it likes to mark it up more than other states especially are next door state texas
109 clear is the closest clear I have used to the old 923-54 clear they had way back in 90s that was the best clear ever besides PPG old 2001 period the Glasruit 923-54 was the best period
Looks really good, we just got Sherwin Williams, clear locks up fast and doesn't dye back.
What are you using 5020?
@josiahbrown2339 it's the 200, 250, and the 21 fast. All are fast but the 250 stays open and flows best 👌
@@josiahbrown2339 ultra series
❤❤❤❤❤ very inspiration
That reflection reminds me of the Elegance clear
Could you make a video on that cart you have with stuff on it in the back of the booth?
Amazing!
Are you using the Luma 1.3 OP or the 1.5 OP for the clear?
1.3
Is that A35 Monaco Blue Metallic? Going to spray that colour next weekend
Code 416
is sealer all the way to clear 1.3 tip ?
luma is 1.5 right
Yes 1.3
I’m curious to see if you’ll like sata more using glasruit. Have you seen the new sata jet x coming out??
Yes it looks great
Need get body air suit pushing fresh air in way more comfortable
Trouble is getting a no peel finished on a BMW & Mercedes when the cars are a peel finish from factory...
👌
How do I get a quote for paint on a 87 Buick Grand National?
Land o lakes fl crash Champions
Where can you buy this ?
Your local basf store
yo kandyman whats your settings on the luma guns?
Wide open fan and fluid 26 psi
I sprayed this stuff before , it’s good. I still like sikkens better.
👏
For that price on that clear , it better have a gloss as the deepest well 😅
Dreamy.
Good luck trying to sand that base over the sealer it will gum up paper I hate using sealer it acts as a sponge period
🔥 🔥 🔥
I’d love to see a video on how you record everything you use for insurance!
Now if only you had better camera equipment not ancient 720p video from back in the 90s it would be better.... anyways great job.
Vehicles before 2007 had no orange peel from factory nowadays everyone have ass everything in the paint looks like crap
Is BASF headquarters in Germany?
Not sure
Azurit black s34?
416
@@kandyman5315 Köszönöm szépen a választ 🤘
Hi Kandyman, what a great result with Glasurit! Is the Luma 3 Exodus as good as the WS400 Series 2 for clear in your opinion?
It's a phenomenal gun
Carbon black metallic
Code 416
Yes sr
@@ernestomanzano3700 🙌
Why people still do this by hand? there are robots and machines to do that already.
🤣
👌👌👌👌👌👌👌👌👌👍👍👍👍👍👍👍🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
That glasruit is trash..... sorry. I was being trained and we put a coat of paint on and took lunch and it was still wet after an hour when we got back. Having to put sealer on and wait 15 mins and using a shaker to mix the thick af paint is just terrible. I used ppg and never understood why so many shops are against waterborne paint until I used this. I personally feel ppg is far superior to this. The 1 and a half gimmick sells up front to a desk painter until youre putting on 4 or so layers to blend a pearl. Im glad you like it but I think it's terrible paint. I feel like I got jobs out in half the time with ppg with better coverage. Plus I love the deltron lineup. No offense at all about what you like but it's just my 2 cents that mean less than a cent lol.
Trash, really .
@kandyman5315 just an opinion. We could smash deltron on and out the door in 10mins. Personally if someone said they use these other waterborne paints I would walk back out the door. When companies want more money but the products take way way more time It just doesn't make sense. Our dealership did the same thing with the switch and the product was more money and the process took an extra 30+ mins if not more. The owner got a kick back for putting the product in the shops but demanded faster production. It's not rocket science. You really don't think it takes alot longer to paint with? During my training with this stuff it took us over 5 hours to do 1 car and it wasn't a tri coat. It was still messed up in the end and blended out like garbage.
@theirishman088 I've always been a big fan of Ppg and I was skeptical when we switched to Glasurit. But, I can honestly say it is a better product and I do the same hours with both lines. Yes, there is a learning curve, but that is to be expected when learning a new paint line.
Trash… I guess that’s why Rolls, Ferrari, Porsche, many of the high end makes come with Glasurit from the factory. Glasurit is the best, RM and Sikkens will absolutely stand their ground as well up with Glasurit. I’m out of the collision industry, and now only in the restoration world. PPG is nice paint for sure, but not in the same league. I’ve sprayed both lines for years. We offered PPG as a cost effective alternative to Glasurit, but phased out. Never looked back. Now nothing but the Parrot.
@@zacrs4do they come with a Louis Vuitton purse also?? Wow, if a high end auto manufacturer uses it it must be good. Thank you for correcting me. I mean anyone who doesn't buy a high end car is just getting a crap paint job. Now that I think of it when I was in sales for crap like American cars people always said the paint was low quality and never looked as good as the Ferrari so instead of the impala they bought a the testarossa.
It's a personal opinion. People get hung up on "you only need 1 and a half coats!" The guy that was training me said that and we had horrible results and put more on than we would have with any other product. I never understood why almost every shop would say we don't want water in our shops period and after seeing this stuff I totally understand. We are all here to make money not make money up front. If the company switched their paint line tomorrow the next one would be the best.. company man is more like it. You can spray anything like glass but the cars coming into the shops are no where close to it and I don't think that's a Ferrari or a rolls in the thumbnail. If you like it then congrats I personally think it's not a great product just like you think this is better than anything out there.