Just letting you know, heavier valve springs increase the return force of the valve, which in turn increases how high you can rev the engine before valve float. When you do this you have to be careful because if you put a lot stiffer spring in without upgrading to a larger cam or valve seats...(ECT) it can cause lose of power and sometimes damage to the valve terain. When you upgrade to stiffer valve springs I would recommend doing a hotter cam and possibly seats/lifters to not only handle the extra force but to make use of the greater rpm potential. Idk where you got the idea that springs alone would increase torque from but alright 😂 not being mean and all just lookin out for ya, it would suck to grenade an engine 👍
Damn i had one of these apollo bikes like 14 years ago and they look way better now! I miss the sound they make and the joy of accelerating through the gears on rural back roads.
Just fixed that on my grips today. Chuck it up in a drill and sand down the throttle tube with like a 220 grit sandpaper and then put some wd40 on it as lubricant. Then when you tighten the clamp it won’t put as much pressure on the tube and it should work perfectly!
Your a beast bro thank you so much for your awesome videos. Thank you so much I now have a new hobby I got my self the apollo rx19 with a light for night trailing. Thanx alot bro keep doing your thing. NEW SUBSCRIBER!!
If you wanna come close to riding a decent wheelie you have to shift to a higher gear. Start in 2nd and find your balance point and click it into 3rd. Sounds like you’re going to blow it up!!
The red throttle housing Is either a 1/4 or a 1/2 turn u replaced it with a standard one and the carb u replace was the original one for the bike because of the intake on the air filter on the end of of it has a pipe that goes in the the engine the sticky throttle cable is because its kinked some where or the cable is too thick the the outer cable housing
Bike looking sweet bro try to adjust that throttle cable should have adjustment up on the top or take that throttle tube off and wipe that bar and spray some wd40 on it might have gunk in the bar or if you glued that grip on glue got in between there
Inspired me to get the 140cc taotao!! Really torn between the Apollos and the tao tao's and i think i made my decision for the DBX1. I think the color combination is beautiful
Nice, I went riding to my friends yesterday, about 15 mins away on my ktm sx 125, and a cop saw us and didn’t bust us😂🤯 and then shortly after I got home clean, my other friend got his bike impounded 🤣
Power isn't the issue people wheelie 1.5 horsepower engines with ease...the issue is too much power...its part mentally part physics...don't be afraid to throw it back and physically make sure u don't loop by learning foot break...
I have a question man what was the size was the mikuni carburetor that you put on ur tao Tao and thanks for the great content I’m new to ur channel and I really love it thanks for a great content love it
I had the same problem with the throttle cable you need to shave off a little from the plastic that holds inside the cable and I also have a rfz. Can I send you a picture? I just have a light
Yo I was riding moped for a long time and his top speed was 40 or something and I want to buy a cheap dirt bike so DO U PREFER APPOLO for my 1. Bike. Appolo 125cca pit bike
Chainging valve spring can’t give you skill 😂😂 and it won’t make the bike faster at all. Change the flywheel if anything make it lighter or get a better head
No one can until you practice until you get it right leave the lad alone man he got a great channel going here and hes said on a few occasions he hasnt been riding long and practice makes perfect
Just letting you know, heavier valve springs increase the return force of the valve, which in turn increases how high you can rev the engine before valve float. When you do this you have to be careful because if you put a lot stiffer spring in without upgrading to a larger cam or valve seats...(ECT) it can cause lose of power and sometimes damage to the valve terain. When you upgrade to stiffer valve springs I would recommend doing a hotter cam and possibly seats/lifters to not only handle the extra force but to make use of the greater rpm potential. Idk where you got the idea that springs alone would increase torque from but alright 😂 not being mean and all just lookin out for ya, it would suck to grenade an engine 👍
Damn i had one of these apollo bikes like 14 years ago and they look way better now! I miss the sound they make and the joy of accelerating through the gears on rural back roads.
Exotic motion : ratatatata
Me: is that a fuckin bird
The clutch is there for a reason, to pull it when you change gear or you can just stuff your gear box
Just fixed that on my grips today. Chuck it up in a drill and sand down the throttle tube with like a 220 grit sandpaper and then put some wd40 on it as lubricant. Then when you tighten the clamp it won’t put as much pressure on the tube and it should work perfectly!
Also make sure everything is tight so there’s no play in the line
Its returning slow because you have bent throttle tube while putting grips on matey
Great video I can’t wait to get my Apollo x19
Your a beast bro thank you so much for your awesome videos. Thank you so much I now have a new hobby I got my self the apollo rx19 with a light for night trailing. Thanx alot bro keep doing your thing. NEW SUBSCRIBER!!
Does anyone know why this lad dosent upload vids anymore? I loved the videos i also love chinese pitbike ,so easy to repair and parts are very cheap
Get a boom Vader 125 it’s a grom clone 1200 shipped! Think it would be a sick build for the Chanel
If you wanna come close to riding a decent wheelie you have to shift to a higher gear. Start in 2nd and find your balance point and click it into 3rd. Sounds like you’re going to blow it up!!
The big carb is the best..you got a more power of yout bike...28mm or 30mm try it....shout out im from phillipines
The Gas comes back slow because your grip runs against the plastic thing
What all mods have you
Done to your tao????
The red throttle housing Is either a 1/4 or a 1/2 turn u replaced it with a standard one and the carb u replace was the original one for the bike because of the intake on the air filter on the end of of it has a pipe that goes in the the engine the sticky throttle cable is because its kinked some where or the cable is too thick the the outer cable housing
You need aerosol cable greaser to make cable easier to move
Bro still on the way but I ordered the Apollo 250cc because of you’re videos and I need more Apollo 250cc videos pleaseeeeee!!! Please!!!!!
jacinto vega when you get it change the oil as soon as possible and get a better carb and make sure you always put the best gas
better carb not needed!!!!!! watch my tuning video on my channel to show you why you don't need a new carb.
@@xii-vi-mmviyt6506 you don't change the oil as soon as you get it, run it 1 hour on the shipping oil. Idk why but it's manufacturer recommended.
Bike looking sweet bro try to adjust that throttle cable should have adjustment up on the top or take that throttle tube off and wipe that bar and spray some wd40 on it might have gunk in the bar or if you glued that grip on glue got in between there
Inspired me to get the 140cc taotao!!
Really torn between the Apollos and the tao tao's and i think i made my decision for the DBX1. I think the color combination is beautiful
What website ??
Nice, I went riding to my friends yesterday, about 15 mins away on my ktm sx 125, and a cop saw us and didn’t bust us😂🤯 and then shortly after I got home clean, my other friend got his bike impounded 🤣
KADIN BUTTS do u have it on camera
FullThrottle no, i need to buy a go pro and start a channel
my throttle did the same thing i threw grease on the bar and inside the throttle tube helped a lot
Where did you get all the custom parts? Was there an easy way to tell if they would fit, or did you just trial and error to see if they would fit?
When your not the first one 😭😭 I didn’t get the notification my phone was dead but keep up the good vids bro
And the bird had me dead
Great channel bro keep vids coming pittys are so much fun 👌i have a thumpstar 170 cc and a demon x 170cc also brilliant and quick bikes 👍
Power isn't the issue people wheelie 1.5 horsepower engines with ease...the issue is too much power...its part mentally part physics...don't be afraid to throw it back and physically make sure u don't loop by learning foot break...
Also learn how to give it smoother throttle reaction...be sure your bike is tuned...but love the content bro
Can you race the 007 and the rfz
Can u make a video on which dirt bike wheelies the best?ur channel fire
One more question. Is the Apollo RFZ the racing version of the Apollo 007
I have a question man what was the size was the mikuni carburetor that you put on ur tao Tao and thanks for the great content I’m new to ur channel and I really love it thanks for a great content love it
Great vid bro that bird be wildin lmao. You should try putting the camera on a tri pod and doing a time laps just an idea have a great day bro!
Love the video u were one of the reasons I bought the Apollo
I'm enjoying this channel so much . KEEP UP ! Also , you migh wanna get a foam type fuel filter ,that will def make a difference !
I had the same problem with the throttle cable you need to shave off a little from the plastic that holds inside the cable and I also have a rfz. Can I send you a picture? I just have a light
Love the videos just got a coolster and I’ve learned a lot from your videos love it bro
Put a smaller front sprocket on itll be a wheely machine
Do you think that the Apollo RFZ would fit me,
Im 5'3 and 95 pounds
U have to great the throttle tube so u can get a fast response
Where did u get this decal set!! Beauty!
Neighbors getting tired of the bikes and moving out? Haha
you should take the rfz to some trails
How do you like this I can buy one used for 300 seems to run good is it worth it
Wd40 the space between the throttle and wd40 the line it worked for mine perfect
I got a ssr450cc Chinese dirt bike n I love it
Can you do a review on the qg-216 (coolster 200cc) I haven’t seen anything on it and apparently it’s a good bike
adjust the throttle housing cable
👍👍👍
I had the same problem with my bike when I first got it, spray a little WD40 in there and go on a ride, problem should be solved after that
You should do one for the street with street tires and the other one for dirt. Like if you agree so he can see it !!
You need to wipe down the handle and use WD-40 and it should be good
Can you do a comparison with the rfz and your ktm I want to know about the seat hight ??????????????????????????????????????
I’m still working on my Apollo dirt bike
Which 125cc is better Tao DB 27 or Appolo 007 ?
Can you please get a forza pit bike 140cc its quality and cheap the colur is black white and orange
keep going man you totally got this :)
More RFZ 🔥
I think that black thing were u but it at, i thinks that's why its going back slow 6:57
Dude, lets gooo! I NEEDED the rfz!
Who’s civic is that? It looks dope
The bikes are cold
Was it broken when u got it new coz I'd send it back
Yo I was riding moped for a long time and his top speed was 40 or something and I want to buy a cheap dirt bike so DO U PREFER APPOLO for my 1. Bike. Appolo 125cca pit bike
LET SEE A SIDE BY SIDE SIZE DIFFERENCE BETWEEN THE RFZ AND TAO TAO
You got glue in your throttle cable that's why its sticky
where do you get all these stickers for your bikes
You from Minnesota? I noticed your friends twins shorts.
Where did you get those fairings?
Where did he get the bikes from ,?
Get street tires 30% dirt 70% street
What did you do with the air hose when you switched the air filter?
Pin it up high on the frame
What did you do whith the hose connected to the old air filter
Just pin it up under the seat. It's a crankcase vent tube.
I got an Apollo 125cc 2011 model midnight edition
Mane I broke my handle bar brake trying to wheelie today and when the bike fell somehow my ignition broke too 😔
Caleb Farve hahaha
was waiting for the fix haha
What websites do you get the dirt bikes
Get A 2stroke for easy wheelies 👌
@ExoticMoTioN what website did you get the RFZ from?
Its literally in the title 😐
Whats the link for the carb??
Where can I get the air filter
What go pro do you have
I'm having trouble getting my RFZ to idle any suggestions I just got it brand new
Michael Puryear if it’s not idling and just bogs out you need to clean the carburetor or adjust the idle screw which is on the carb.
Hey dude I have the Apollo rfz and the exaust started to smoke a little do you know what wrong ?
FullThrottle bro if the exhaust smokes more the better
It’s always not a good sighn if it doesn’t smoke your fine bro
It's probs just burning off oil in the pipe, could be a number of things though depending when it's doin it..!!!
Nice bike
Would the Tao Tao 140cc be good for me I’m 5’6
It would be perfect for you
Zed 🧢 beet is 6’7
I'm 5'7 and I have an Apollo rfz x18 125cc
elmer salinas i’m 5’1 getting rfz140 and it’s race tuned
Spray WD-40 down the throttle Line
I love the apollo
Love your content
And I can’t see carb link
I can’t find the carb
Chainging valve spring can’t give you skill 😂😂 and it won’t make the bike faster at all. Change the flywheel if anything make it lighter or get a better head
Move your grip back
Can you drop your instagram bro
The word youre looking for is torque 🤦🏻
I need fix my lol
Grease your throttle
One Thing for sure you can’t wheelie😂
No one can until you practice until you get it right leave the lad alone man he got a great channel going here and hes said on a few occasions he hasnt been riding long and practice makes perfect
Bruuhhh maybe just learn to wheelie and don't be the "ooh bike not enuff power 4 wheeliezz need more pouwerrr"
Get a real bike