How to Replace a RYOBI 18v and 40v Trimmer Head
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- Since I'm reel mowing the backyard, I need to be able to trim as close as I can to the lawn height of cut. I don't have the trimmer to purchase rotary scissors or the $$$, so I'm changing my 18v RYOBI's bump head to the serrated blade attachment. I've never done this before, so I figured I'd make a video about it... you're welcome!
Don't forget to join me LIVE tonight at 9 PM EST for a giveaway!
For more products that I use, check out my kit.co page.
kit.co/ChuckMo...
If you like my content, please subscribe to my channel. Also, hit the like button. If you have any questions, please feel free to message me via any of my social media channels.
My Social Medias:
Facebook - / chuck.morgan.9887
Instagram - / dadding_all_day
Twitter - / chuckmorgandad
I make a small commission off purchases made through the links listed above. These purchases do not have an additional cost to you. As with any product or service, if you purchase and use any product you assume responsibility, regardless of any information or recommendations given.
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
This was so incredibly helpful and easy to understand. I was starting to lose my mind. Thank you so much!!
You're very welcome
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. th-cam.com/users/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
Thank you!
This was the easiest tutorial about this installation I found. Thank you!
Perfect! I'm glad to hear it. Thank you for watching.
Well on your way to mastering all this mechaniacle stuff!
Read, Comprehend, Do.
First time, Novice.
Second time, Journeyman.
Third time, Pro.
Fourth time, Master!
The beard rocks! I'm 67 and can't match it so I'm a little...no, not jealous. Call it admiration.
Hahahaha! Thank you sir. I don’t know how much longer I’ll have the beard, but I’m enjoying the ride.
Lol TH-cam SAVES THE DAY AGAIN!!!! Thank you for posting this!!!
You're very welcome!
See you tonight, Chuck! Great video as always!
Thankyou so much, would have never figured out how to remove the old head.
I'm glad my video was a help.
Straight up☝💯🔥👏👏Glad you made this video and actually showed the processes! Thank you👍👍
You saved so much of my time! Thank you!
You're very welcome!
Thank you !! Only source of information I got on this 🙏
You're welcome!!!
Thanks Chuck, I had a hard time locating info on the dual blade assembly. I have the Ryobi 40 Trimmer. It appears I don’t have to take off the entire head.
Very useful thanks. If you make more videos try to put more light on the items, that will make things clearer.
I make a lot of videos, this one was last minute so I didn’t use a normal set up. Thank you for the feedback
Let's see that thing in action!
I can’t find the hole you were talking about. I have a gas powered Ryobi extend it, can’t take the bottom part of the head off.
It maybe a different head. They have different heads in most models
thanks that helped me a ton.
Awesome! I'm glad it was able to help.
Thank you. A little stronger lighting would help old folks like me see the video better. Other than that great information
Sorry about that. Very impromptu video, so I didn't have my normal setup
I need to do this to the P2003VNM model, but how?!?!?!?!
I wish I could help.
Good try. The one you showed is a 40v. My 18v trimmer looks different. Could you do one with the 18v guy ? Thank u
They make an 18v with that head as I owned on prior to getting this one. Ryobi makes too many variations of a tool that does one thing.
@DaddingAllDay Thanks for your explanation. Have you seen a video with the 18v smaller head version ? This video showing 18v and 40v guys are quite beefier and of a different design. I need help to remove 18v head.
Thanks guys.
👍🏻
Goodness, get to the point
Thanks for the advice. Have a great day.
Losing my mind here. I have a newer 18 volt, looks like the head is different from what you are working on. I can't find the place to remove it.
Any ideas?
I'll do some digging and see what I find.
First. That is like a mini brush hog. 😆😆
Will this work for the Ryobi AutoFeed trimmers?
I'm not sure. This one was a bump feeder.
How did you tighten the "bottom bit" before completing the assembly of the serrated head?
It just clicks into place.
@@DaddingAllDay mine must be defective. 😬
Does anyone know of the edger head can be replaced with the trimmer head?
I'm not sure.
I need the part number/name for the pin that holds the blades... mine sheared and I can't seem to find a replacement
I'm sorry, but I don't have it. I'll double check but I can't find my instructions.
I just bought a new head for $35 or so. My ADD told me I should buy a cheap lathe and a drill press and start me a replacement parts business...
Mate I can’t get past the first step. Separating the upper and lower housing.
Hmmmm.... Is the model exactly the same. Ryobi tends to differ from models.
@@DaddingAllDay I’m not sure but a customer of mine got it apart. I just haven’t got the hand girth for it. 🙏🏻 for responding.
ryobi p20102vnm is not compatible with ac053n1fh reel easy
Too bad this is not helpful for the newer models ... no way to remove the head at all on those
Unfortunately not.