DEVIN!! I cannot express how happy i get when you upload no matter if it’s everyday or once a week. Your work ethic and content is top tier man, I truly appreciate all that you do for us viewers and the car community!
Helpful tip when using a press; always reset the press after you get the item centered and slightly pressed into place. This will let the item center itself instead of being forced into place by pressure from the press. Just something I was taught from a master diesel tech. Loving the content, long term sub from Snohomish ✌
Because of Bobbi build. I’m going rotated ETS 6466 PT with a 5 inch front mount. I didn’t want to do it but you made me realize. I’m young, and I need to do what I love.
@@emersonsims9503 It's called knowing what you're doing, being organised and still having enough time to edit at the end of the day. This was all on in one day and not faked.
Always a pleasure to see you improve your cars, you make it look so easy. I might just consider building up my own car one day myself because you give so much inspiration in that regard.
I was thinking the same thing. It’s the first time I felt Devin fundamentally approached something wrong. No matter whether they’re in series or parallel there should be returns.
Yeah I came here to comment on the fuel system being incorrect. Needs to be split parallel feed with a return. This setup won't run deadhead like that.
Devin I just started to enjoy the video and just as it's on a high the video stop 🛑 Have been a subscriber from early days and you never disappoint...love the content.
I’m still burnt that I didn’t get the shirts I wanted on the drop. Only saw the refund the next day and by that time my size was sold out in EVERYTHING. RIP
##### READ THIS ##### Well guys in this time its up for us a youtube fam to encourage Devin as his brother Camron is fighting leukemia again , Devin i wanna wish you better times and let us know if as a community we can do anything in this difficult times . I want to wish Cameron the best of health and to get back to his passion healthy and well with gods will ####
Great job Devin! I’ve been watching your builds and so stoked you’re working on the same car as the one I have, is there any tips you could give me for removing the intake manifold on the sti? I need to get under there to replace the secondary air valve.
Question : Do you recommend putting exhaust system & intake manifold on prior to putting the engine back in? I’ve been told to put exhaust manifold on after so you have more clearance.
Question how do you rebalance the turbo shaft after re assembly? ore why didn't you? and Blue Loctite "middle strength" + low heat to make it go, poof. meaning so close to exhaust gasses it will be gone the first startup.
love the red inlet manifold personally great colour to contrast with the white paint. just hate all the work and great parts bolted on to a rubbish block and head set up such a waste of time and effort. do it once do it right with a closed deck built makes more sense for the car long term even if you sell it
DEVIN!! I cannot express how happy i get when you upload no matter if it’s everyday or once a week. Your work ethic and content is top tier man, I truly appreciate all that you do for us viewers and the car community!
This man needs to be at AT LEAST A MIL by now. Your content is so pure and 🔥 🔥
Helpful tip when using a press; always reset the press after you get the item centered and slightly pressed into place. This will let the item center itself instead of being forced into place by pressure from the press. Just something I was taught from a master diesel tech. Loving the content, long term sub from Snohomish ✌
Because of Bobbi build. I’m going rotated ETS 6466 PT with a 5 inch front mount. I didn’t want to do it but you made me realize. I’m young, and I need to do what I love.
The man fitted up the car and just left us on a cliffhanger the heck looool
Hell yea man. This car is becoming probably my favourite. Keep this grind going. Will be watching every video and all the way threw 🤘
Thanks Devin, I'm having a great day for a change. I hope you are too, Amigo.
davin you make everything look so easily
I can't believe how fast you put it all back together.
He’s a god wym
It's called editing...
@@emersonsims9503 It's called knowing what you're doing, being organised and still having enough time to edit at the end of the day. This was all on in one day and not faked.
@@jamesemcclure yes I know dude #chill
Looks great Devin. Finally coming together.
You need a custom SUSTI windshield vinyl. 🤣
I'm sure Kevin can install it...
That engine looks so good in the car
Actually mind blowing how much stuff you are capable of! Hat off to you!
Love watching your vids on this car. Got the same year STi (although with 257 lol) but I'm learning so much!
Looks great man...cant wait to see her running...those rails are dope...
Always a pleasure to see you improve your cars, you make it look so easy. I might just consider building up my own car one day myself because you give so much inspiration in that regard.
Damn, them chained bolts holding the motor to the hoist... I really was waiting for one to snap, but thankfully none did!!
That radium fuel setup is super clean, but I’ve never seen anyone use a returnless style setup in a subie so I’m curious to how it holds up
I was thinking the same thing. It’s the first time I felt Devin fundamentally approached something wrong. No matter whether they’re in series or parallel there should be returns.
I’ve never seen a returnless system in my entire life on a turbo Subaru
Yeah I came here to comment on the fuel system being incorrect. Needs to be split parallel feed with a return. This setup won't run deadhead like that.
Cant wait for tomorrow's install.... 😊
HE BACK! with more content.
No Koyo radiator!?! Love this man, someday I hope to have a garage of my own so that I can work on my own vehicles. Keep it up!
Finally after being 10 videos behind I'm finally up to date 💪💪
Looking sweet brotha!
Man, you are the beast ! :D You work on this car yourself ? It's sooo fast and good work :D
I envy the knowledge you have about these cars .
Devin I just started to enjoy the video and just as it's on a high the video stop 🛑 Have been a subscriber from early days and you never disappoint...love the content.
Thank you for your car service
Yeahhhh been waiting
Was waiting for those bolts to snap out of the intake manifold haha
I was sweating when you used that press to seat the turbine back into the housing 😦
awesome 👌 great work 👍 bro
You should redo the intake at some point, the turbo looks so much better!
Great job, but that's a terrible lift point for those motors! Use the alt bracket and bolt hole back by the trans.
Yeahhhhhhhhh get er done dev!!!!!
Sooo stokedddddddd!!!
Nice. Im waiting for this thank you sir
those camera angles tho
That Dutch Bros coffee tho
I’m still burnt that I didn’t get the shirts I wanted on the drop. Only saw the refund the next day and by that time my size was sold out in EVERYTHING. RIP
Me too man
You need to add a "Turb-ski" t-shirt to the clothing line. :)
This video remind me I need to rebuild my turbo I’m getting excessive oil past the turbo seal
Good work bro
Hell yeah man
Don’t forget the belt for the a/c !!
Wow just goat at
Legendary
good stuff
Fuego.!
Please tell me today is the day we get too see this thing finally start up I’m soo pumped
I want a DEVIN BUILT evo or sti for Christmas 🎄
Man idk why but Devin is making wrx hatches grow on me 🤔
We here ❤️💪🏻🤙🏻💯
👍🏻
For the Algo
I really think the intake would looks so crazy with it white. Then the turbo the red.
##### READ THIS #####
Well guys in this time its up for us a youtube fam to encourage Devin as his brother Camron is fighting leukemia again , Devin i wanna wish you better times and let us know if as a community we can do anything in this difficult times .
I want to wish Cameron the best of health and to get back to his passion healthy and well with gods will
####
Yes sir 🔥🔥
Yessah
Yap
Great job Devin! I’ve been watching your builds and so stoked you’re working on the same car as the one I have, is there any tips you could give me for removing the intake manifold on the sti? I need to get under there to replace the secondary air valve.
Devin do your plan on going FMIC on this setup???
🔥💯👌🏽
Can you link the c clamp pliers you used for that big ass clamp around the compressor housing? I can’t find any that will work without breaking
Definitely engine if you live in New Zealand or Australia. Lol we never say motor
Question : Do you recommend putting exhaust system & intake manifold on prior to putting the engine back in?
I’ve been told to put exhaust manifold on after so you have more clearance.
Cummins Turbo
Do you build motors for customers?
Question how do you rebalance the turbo shaft after re assembly? ore why didn't you? and Blue Loctite "middle strength" + low heat to make it go, poof. meaning so close to exhaust gasses it will be gone the first startup.
Does it not require any type of balancing after being rebuilt?
What spark plugs did you use on the 2.0?
Saludos desde México🇲🇽!!!!
Has anyone replaced their steering rack on this year of Subaru? It’s leaking all over. I’m about to do mine and was curious how difficult it is.
You need to get a Mitsubishi gallant gdi
love the red inlet manifold personally great colour to contrast with the white paint. just hate all the work and great parts bolted on to a rubbish block and head set up such a waste of time and effort. do it once do it right with a closed deck built makes more sense for the car long term even if you sell it
I am making it my goal to make every one of your cars on horizons 5
Sheeesh
All the way from south africa🌹I'm your biggest fan
Yoo devin wasn’t it the A/C compressor seized ?
Black and red Subaru badges.....?
Dudw that turbo is going to granade it's self if u don't balance it
New t shirt self made self taught she built a Lil sus! Lol
Jesus you guy's are fast at posting comments.
How many videos before you re-powder than inlet?? haha you need to upgrade your oven bro, you coat stuff all the time.. get it done!
4 years in the making
wtf the filipino said that “ napaka lupet mu idol”
flush those fuel lines.
is Devin sponsored by Dewalt or something?
SK
@@JayFeuerherm what does sk mean?
@@EddieSwaggy He’s sponsored by SK tools I think, not too sure about Dewalt
@@JayFeuerherm okay thanks for the info bro
Busty susti
Cheers from Astoria Oregon!
@@travismills9464 wild I grew up near there haha cheers 🍻
First
GUYS I THINK BOBBY DIED :(
No she is looking on some new houses they are moving