I need to swap my front and rear from an accident. Can you manage it solo if you have something to support the door with or does it require two people ? I have an attachment for my floor jack that might work.
We wouldn’t recommend it, as getting the alignment might be tough. The doors are usually heavy and a bit awkward to move around. If you go it solo anyway, let us know how it goes!
I have a 97 f150 wirh manual window and locks. Can i replace my doors with doors from a 97 f150 and actually woek? I found out u can put seats from different models. Are there plugs in place or do i have to rig it up
Usually you have to rig it up, but if you can get the harness from the donor vehicle it might not be so bad. Or you can run a 12v accessory wire to the door and make a harness.
This was the motivation for making the video! A friend of ours couldn't find one, so we made one. If you have any ideas you want to see us make in the future, let us know =)
@@NiceGuysGASS I just bought studded 60 powerstroke it runs great. Had to pull the turbo to replace the one coolant line recently. This door hinge been rattling driving me nuts. Man, those connectors by the door handle are giving me a real trouble with my fat hands
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 2 | 29 ก.ย. 67](http://i.ytimg.com/vi/r3lfLNH6Ke4/mqdefault.jpg)
You didn't show how to disconnect the electrical...
We did not. Sorry
I need to swap my front and rear from an accident. Can you manage it solo if you have something to support the door with or does it require two people ? I have an attachment for my floor jack that might work.
We wouldn’t recommend it, as getting the alignment might be tough. The doors are usually heavy and a bit awkward to move around. If you go it solo anyway, let us know how it goes!
Thanks,just sucks I have to remove panels....stupid engineers
Yes it does. Best of luck!
I have a 97 f150 wirh manual window and locks. Can i replace my doors with doors from a 97 f150 and actually woek? I found out u can put seats from different models. Are there plugs in place or do i have to rig it up
Usually you have to rig it up, but if you can get the harness from the donor vehicle it might not be so bad. Or you can run a 12v accessory wire to the door and make a harness.
Thank you for being literally the only video that shows removing a car door 👏🏼👏🏼🎉
This was the motivation for making the video! A friend of ours couldn't find one, so we made one. If you have any ideas you want to see us make in the future, let us know =)
@@NiceGuysGASS yes a ford fusion door 😆
You guys are great lol love the jokes
We're pretty good at jokes. Less good at fixing stuff.... but you should subscribe anyway and see all the shenanigans we have to offer!
The most stupid door design ever
It’s up there, for sure
Thank you
You're welcome
How do you adjust a door on a Ford pickup extra cab do you adjust with a hinges
Check and make the hinge pin isn’t damaged, ensure nothing is bent and then yes, they should be adjustable
I think you should of mentioned what size wrench you used in the hinge bolts
Yeah, we’ve changed that practice since we made that video. Check out some of the new videos, wrench and bolt sizes are generally included.
13mm
Thanks
🤘
Fish all the wires threw the door nice thanks ford
Love ‘em or hate ‘em
@@NiceGuysGASS I just bought studded 60 powerstroke it runs great. Had to pull the turbo to replace the one coolant line recently. This door hinge been rattling driving me nuts. Man, those connectors by the door handle are giving me a real trouble with my fat hands