This is a great video - thanks for posting. I followed it to rebuild a 150cc Chinese quad that had the same engine - using a new piston and barrel. Hopefully mine will now start/run but unfortunately there is another issue with the starter clutch which needs addressing. Thanks and regards from the UK.
Do you offer a 161ZMK-B2 rebuild service. I have no idea how to go about this. I can't find a company or individual that I could send my engine too, to have it built. Any Help?
I have a gokart that has a gy6 150cc and I just rebuilt it today but the big hole on the cam is facing Down towards the piston and and it was running good but smoked alot so that's way I rebuilt it. I rebuilt it the same way with CAM HOLE FACING DOWN TOWARDS PISTON. It runs but should I turn the cam around so hole is facing up towards steering wheel?? PLEASE HELP
Hey there nice video would you or anyone you know where i could find a left side crankcase for hammerhead 200 w/internal reverse? Thanks and great video really helpful
I have the carter talon has the gy6 150 motor but mine has the two bolt valve cover an yours is four bolt anyone have leed to where I can find a top end kit
i bought a new 150 motor it doesnt run the valves were bent i put a new head on when i timed it like you did and you turned the flywheel to make sure it was right i did that and the valves were to tight. wtf?????
![GY6 ENGINE BUILD [Everything you need to know]](http://i.ytimg.com/vi/wC5tYKqq0-0/mqdefault.jpg)
Finally someone who knows what they are talking about…Thank you for the video…
This is a great video - thanks for posting. I followed it to
rebuild a 150cc Chinese quad that had the same engine - using a new piston and
barrel. Hopefully mine will now start/run but unfortunately there is another
issue with the starter clutch which needs addressing. Thanks and regards from
the UK.
Nice
th-cam.com/video/vnjRNz81MFs/w-d-xo.html
Thank-you for the time you put into this, it was very helpful!!!
What millimeter kit did you buy for the rebuild?? Please let me know
Thanks this was a big help. I will use it soon on mine soon as my parts arrive.
Do you offer a 161ZMK-B2 rebuild service. I have no idea how to go about this. I can't find a company or individual that I could send my engine too, to have it built. Any Help?
Do u need to drain oil first
What kinda of lubricant are using for the piston and putting it back together?
I have a gokart that has a gy6 150cc and I just rebuilt it today but the big hole on the cam is facing Down towards the piston and and it was running good but smoked alot so that's way I rebuilt it. I rebuilt it the same way with CAM HOLE FACING DOWN TOWARDS PISTON. It runs but should I turn the cam around so hole is facing up towards steering wheel?? PLEASE HELP
It can't be 180° 'out', as it sparks on intake and exhaust.
@@mattdwyer9432 ya I realized I was wrong...
@@Daniel-jw3of just tryin' to help! It's possible I've worked on mine more than I've ridden it!
what is the differences between gy6 engines i have the carbide 7150 150cc i want to rebuild the top end its in an trail wagon tw200
great video very detail and helpful thanks keep it up..
Your video helped me thank you
WHAT REBUILD KOT SHOULD I BUY FOR THIS ??????
Lil Rascal Minibike Kit
@@GoPowerSports what is that bolt on the side of the cylinder body for? It's by itself... seems to go nowhere nor hold anything...
Hey there nice video would you or anyone you know where i could find a left side crankcase for hammerhead 200 w/internal reverse? Thanks and great video really helpful
Nice! Thanks!
perfectly done video.!!!!!!!!!!!!!!!!!!!
I have the carter talon has the gy6 150 motor but mine has the two bolt valve cover an yours is four bolt anyone have leed to where I can find a top end kit
what did you set the valves at?
.004
i bought a new 150 motor it doesnt run the valves were bent i put a new head on when i timed it like you did and you turned the flywheel to make sure it was right i did that and the valves were to tight. wtf?????
like everthing else i figured it out.
Best is to set intake at 0.003 and exhaust at 0.004
..
You put the valve rocker on upsidedown! Ex facing upwards even tho you said put it downwards!
Exhaust down and Intake up.
No link to the Ultimate rebuild kit?
theres plenty of videos on big bore kits on how to do them. it aint shit to do.
Mostly i find them smoking due to cheap crap valve seals.
the torque is 14lbs for the head the 6mm head bolts are 7lbs. you need a bigger engine in that go cart.
We're do the silver ring go
Why does it cost 2.99 a month just to join this channel wth lol
Cuz you love us
Sorry, QMK-B2