I also was in a decently bad accident and walked away, we limped. I’ve considered it my one free ticket and have steered clear of bikes. Well I’ve been watching you for a couple years now and can say you have helped me decide to try 2 wheels again. I appreciate all of your content. Can’t wait to see this new bike hit them trails
Zachary, I know the feeling. I contemplated selling my Tenere after my accident but there's nothing like riding trails. I'll probably spend even less time on road than I did before but I'm ok with that!
nice to work on a clean bike.. i bet you still go down stairs n just stare at it... glad to hear your taking care of that foot and not risking more injury... keep on keeping on swanky
It really is, I'm hoping to get mist stuff wrapped up before I can get on it and get it all dirty. Your correct, I can often be found just admiring it down there lol.
Man I got testicular torsion a week before i planned on trying out this bike. I had to wait 3 weeks before i could comfortably sit on it to try it out. Now mine arrives next month!
Just fit mine. Couple of additional points to mention... you showed the different length screws ... for anyone fitting these ensure you use the four short stubby ones for attaching the barkbuster to the bar and the longer screws are for the wind deflector. You did show it, but it’s worth reiterating the point as I almost got mine the wrong way round. Also worth mentioning are the clamp grooves on the inside of the clamps dictate which side they go to compensate for the taper on the handlebars. Hope you’re riding soon mate. What an epic bike. Ride safe and get that leg better!
Hmm I did not notice that the clamps had a right and a left. I guess I must have just gotten lucky and did it right? Good info though, thank you! I got a few rides in before we got some snow, it is an epic bike! Thanks!
Thanks for this video. bought a 2021 T7 3 months ago, put 12,000 miles on it already (road trip miles) & now adding all the farkles, went with Outback Motortek crash bars & rear racks, Black Dog bash plate & Camel ADV fuel cell & just got my Barkbusters today, still waiting on my seat concepts seat. Still have my KLR 685 as well. thanks again
@@SwankyCatProductions I knew the limits of the KLR more than the T7 as of yet, also the maint on the KLR as the T7 is still new & a learning curve still. The KLR i battle tested many many times & built like a tank. have yet to really crash the T7,
I'm doing the same thing, just backwards. Doubletakes arrived today, simple install. Barkbusters fresh of the boat from Australia , on the way to my place. Triumph Tiger 900 Rally Pro...
Saw another driver, while picking up a load in Ft Atkinson, that had a ramp built behind the cab of his truck with a dual sport on it. Took a pic but realized no way to send it to you. Sure got my head going a million miles an hr though. Lol looking good. You’ll be on that thing b4 u know it.
Loved the look on your face when you threw your leg over the seat for the first time! Priceless! You might need to trim the outside of your throttle side grip off so it doesn’t stick. Had to do that with a few of mine. Also had to trim the end off my levers so they did not contact the Barkbuster. Can’t wait to see how you like the bike compared to the KLR (may it Rest In Peace).
Thanks, lookin to do the same on my own, but maybe in white as I have the red/white Tenere. Ironically, had to recover from a broken leg to start riding mine as well....just finished the 1000 mile break-in, loving it!
Wow strange... I actually saw another guy on Facebook who had a broken foot and a new Tenere. Who knew getting on one of these would be so difficult!? Haha. Glad to hear your on the other side of it though, I can't wait!
I was yelling at the screen when you were doing the right mirror "no! turn it the other way!" I figured you were going to break it off! I put my levers down more for when I stand up and the brake banjo is almost touching my Bark Busters.
Yeah haha I shoulda known better. I think the KLR was the same way. I guess it's just been to long. Mmm yeah that would be a problem. I usually leave mine a little higher but might adjust them eventually.
I had the same issue with the barkbuster bar end rubbing against the throttle grip. My solution was to keep the stock bar end and fit the barkbuster over. The bolt is a bit too long, so I just used the stock one also and its working for now until I get a shorter bolt. Clearance is tight around the master cylinder, but seems ok. I might move it outward a little. My clutch lever was bent from an earlier fall and smashed against it. Guess I will need to replace it with an adjustable one.
I was in my local Kawasaki dealer yesterday picking up a headlight bulb for the KLR. While I was there a Kawasaki rep was in too and told us that he can confirm production of a new KLR replacement. He couldn’t give any details but I’m hoping its Kawasaki’s answer to the Tenere.
I've seen some concept images floating around. They look pretty similar to the Tenere but not quite as cool. I'm hoping they tweak it a but and put together a better color scheme. If they do, I'll probably pick one up in the future!
Hey Swanky Cat, love your videos and just got my hands on a T7 that I've instantly fallen in love with. Question for you about these barkbusters...did your handguard kit come with the bar-end bolt that appears at the 7:25 min mark of your vid? Mine didn't and I'm wondering if you ordered separately.
I'd probably be right there with you if I had been able to ride for the last month. Now I'm hoping to get at least a few more months of warm-ish weather.
I added the BarkBusters as well and found that the clutch lever was way too close to the barkBusters. I'm surprised that a Yamaha Tenere 700 specific fit has that problem. I am not using the additional flap to get an extra few millimeters of space. Anyone have a good solution to the problem? I am considering a shorter clutch lever but am disappointment that I have to spend additional dollars to solve a design defect.
Thanks for this great how to video. Do you think the the BB Storms would fit too? I understand that the metal parts are the same but I wonder if the plastics would interfere somewhere. Thanks man good job!
Haha yeah the wrenching is keeping me sane. Feels good to get all of this out of the way while the bike is still clean. Haven't heard anything on the KLR yet, not sure what the deal is.
Hi swanky, I know this video is a little old now but was just wondering if you had any trouble getting the short screws that attach the main plastic body to the aluminium bars to properly seat all the way down? I have just put mine together thanks to your video and that seems to be the only thing that hasn’t worked perfectly. There seems to be a 2-4mm gap between the screw and the surface. Anyways I hope you can reply and hope you are doing much better now. Thanks again for the great video, Take care!
I did have a bit of an issue getting them down tight. Mine seemed to be slightly offset so I had to sort of push them straight while turning them in. One thing you might want to double check is that you've got the right screws. The ones for the extra deflectors look pretty similar and I think I almost switched them at first. Otherwise just push hard and twist! I'm doing much better and enjoying the T7, thanks!
Yeah she's a bit tall . I am 6' with a short inseam and long torso . The balls of my feet touch the ground when all my 210 pounds plus what 25 pounds of protective gear . Thinking about the low seat or maybe the lowering kit but not sure yet . With my weight I am at the top end for the rear stock spring so one day I should look into that or lose ten pounds , haha .
@@SwankyCatProductions Yes I ordered online for Tenere 700 but they don’t fit, i have 22mm clamps and i think i need bigger one, can you tell me the exact size and type that i need for my Tenere, if you can send my a link when i can see the clamps and kit I need. Thanks a lot
SWANKY CAT amazing ..can’t wait to see how it goes. I just bought a 14’ CB500x with full Rally Raid set up...picking it Labor Day. Keep the content coming...good luck with the foot.
Hahaha I'm doin alright, I've been enjoying not having to worry about getting things done all in one day so I can get back on the road. Not having dirt everywhere has been really nice too!
![เปิดบ้าน นาราเครปกระเทย 1 ไร่ ขายขาดทุนหลัก10ล้าน เอามาใช้หนี้!!! l [Nickynachat]](http://i.ytimg.com/vi/0jz84VFWVP4/mqdefault.jpg)
I also was in a decently bad accident and walked away, we limped. I’ve considered it my one free ticket and have steered clear of bikes. Well I’ve been watching you for a couple years now and can say you have helped me decide to try 2 wheels again. I appreciate all of your content. Can’t wait to see this new bike hit them trails
Zachary, I know the feeling. I contemplated selling my Tenere after my accident but there's nothing like riding trails. I'll probably spend even less time on road than I did before but I'm ok with that!
Great video, thank you.
As for torque settings, here's what was in my packaging:
M6 10 Nm
M8 20 Nm
M16 21 Nm
Nice, thanks!
happy to see you wrenching and making videos. Stay vigilante in your healing process.
Thank you! Will do!
Genuine BarkBusters! That's a power move
Oh yeah!
nice to work on a clean bike.. i bet you still go down stairs n just stare at it... glad to hear your taking care of that foot and not risking more injury... keep on keeping on swanky
It really is, I'm hoping to get mist stuff wrapped up before I can get on it and get it all dirty. Your correct, I can often be found just admiring it down there lol.
Atta boy Ben! Glad to see you sitting on her. Those hand guards look fantastic. Can’t wait to see you out and about on it.
Thanks Box Of Chocolates!
Man I got testicular torsion a week before i planned on trying out this bike. I had to wait 3 weeks before i could comfortably sit on it to try it out. Now mine arrives next month!
Just fit mine. Couple of additional points to mention... you showed the different length screws ... for anyone fitting these ensure you use the four short stubby ones for attaching the barkbuster to the bar and the longer screws are for the wind deflector. You did show it, but it’s worth reiterating the point as I almost got mine the wrong way round. Also worth mentioning are the clamp grooves on the inside of the clamps dictate which side they go to compensate for the taper on the handlebars. Hope you’re riding soon mate. What an epic bike. Ride safe and get that leg better!
Hmm I did not notice that the clamps had a right and a left. I guess I must have just gotten lucky and did it right? Good info though, thank you! I got a few rides in before we got some snow, it is an epic bike! Thanks!
Thanks for this video. bought a 2021 T7 3 months ago, put 12,000 miles on it already (road trip miles) & now adding all the farkles, went with Outback Motortek crash bars & rear racks, Black Dog bash plate & Camel ADV fuel cell & just got my Barkbusters today, still waiting on my seat concepts seat.
Still have my KLR 685 as well.
thanks again
Nice! How do you like the T7 in comparison? Anything you miss about the KLR while on the Tenere?
@@SwankyCatProductions I knew the limits of the KLR more than the T7 as of yet, also the maint on the KLR as the T7 is still new & a learning curve still. The KLR i battle tested many many times & built like a tank. have yet to really crash the T7,
I'm doing the same thing, just backwards. Doubletakes arrived today, simple install. Barkbusters fresh of the boat from Australia , on the way to my place. Triumph Tiger 900 Rally Pro...
I've been eyeing those mirrors, maybe after I break one of mine haha.
Saw another driver, while picking up a load in Ft Atkinson, that had a ramp built behind the cab of his truck with a dual sport on it. Took a pic but realized no way to send it to you. Sure got my head going a million miles an hr though. Lol looking good. You’ll be on that thing b4 u know it.
Hey man glad to see you looking better, getting your color back 👍, can't wait to see you ride that baby
Thanks Brian!
Loved the look on your face when you threw your leg over the seat for the first time! Priceless! You might need to trim the outside of your throttle side grip off so it doesn’t stick. Had to do that with a few of mine. Also had to trim the end off my levers so they did not contact the Barkbuster. Can’t wait to see how you like the bike compared to the KLR (may it Rest In Peace).
Haha yeah it was a good feeling! Cannot wait to actually ride it!
Swanky, You are in for a great treat once you are able to ride your bike. Loving mine.
Good job swanky! Love ur videos brother, keep it going.
Thanks man!
Just got my barkbusters in for my T7. Installing this evening with the help of your video. Stay Swanky. Thnx. Happy New Years from Texas!!!
That's awesome to hear Patrick! Good luck and happy new year!
Bark busters and double takes are clutch. But not as clutch as that wicked owl t-shirt. Loving that shirt man. Great video.
-Dowski.
Haha thanks Man!
Thanks, lookin to do the same on my own, but maybe in white as I have the red/white Tenere. Ironically, had to recover from a broken leg to start riding mine as well....just finished the 1000 mile break-in, loving it!
Wow strange... I actually saw another guy on Facebook who had a broken foot and a new Tenere. Who knew getting on one of these would be so difficult!? Haha. Glad to hear your on the other side of it though, I can't wait!
Looking good Ben! Can't wait to see that bike in action!
Thanks Ron!
I was yelling at the screen when you were doing the right mirror "no! turn it the other way!" I figured you were going to break it off! I put my levers down more for when I stand up and the brake banjo is almost touching my Bark Busters.
Yeah haha I shoulda known better. I think the KLR was the same way. I guess it's just been to long. Mmm yeah that would be a problem. I usually leave mine a little higher but might adjust them eventually.
I had the same issue with the barkbuster bar end rubbing against the throttle grip. My solution was to keep the stock bar end and fit the barkbuster over. The bolt is a bit too long, so I just used the stock one also and its working for now until I get a shorter bolt. Clearance is tight around the master cylinder, but seems ok. I might move it outward a little. My clutch lever was bent from an earlier fall and smashed against it. Guess I will need to replace it with an adjustable one.
I've got Barkbuster Jet hand guards on my CRF 250L. I like them a lot.
They are good stuff!
Barkbusters look good on the bike and look to be a good quality hand guard. Much sturdier than oem. Good work!
Thanks Jeff!
I was in my local Kawasaki dealer yesterday picking up a headlight bulb for the KLR. While I was there a Kawasaki rep was in too and told us that he can confirm production of a new KLR replacement. He couldn’t give any details but I’m hoping its Kawasaki’s answer to the Tenere.
I've seen some concept images floating around. They look pretty similar to the Tenere but not quite as cool. I'm hoping they tweak it a but and put together a better color scheme. If they do, I'll probably pick one up in the future!
Anything is better than the klr.
Hi, pretty solid i quess. Have the same with Puig levers who are adjustable.
the clutch cable makes a small bend over the metal.
Greetz Alexander
Hey Swanky Cat, love your videos and just got my hands on a T7 that I've instantly fallen in love with. Question for you about these barkbusters...did your handguard kit come with the bar-end bolt that appears at the 7:25 min mark of your vid? Mine didn't and I'm wondering if you ordered separately.
Thanks! As long as you got the Tenere kit you should've gotten them yes.
Greetings from mountain wi. Snow is on my mind already sick of summer
I'd probably be right there with you if I had been able to ride for the last month. Now I'm hoping to get at least a few more months of warm-ish weather.
@@SwankyCatProductions don't blame ya one bit
I added the BarkBusters as well and found that the clutch lever was way too close to the barkBusters. I'm surprised that a Yamaha Tenere 700 specific fit has that problem. I am not using the additional flap to get an extra few millimeters of space. Anyone have a good solution to the problem? I am considering a shorter clutch lever but am disappointment that I have to spend additional dollars to solve a design defect.
Thanks for this great how to video. Do you think the the BB Storms would fit too? I understand that the metal parts are the same but I wonder if the plastics would interfere somewhere. Thanks man good job!
BarkBusters look great! Glad to see you are getting better! Any word on the old KLR?
Thanks! Nope nothing yet. Not sure what the deal is... I'll probably contact the dealer next week to see what's going on.
Patience is a virtue so they say. None here. Glad your ok for most part. Could of been alot worse as we all know! Is the klr totaled?
Haha yeah the wrenching is keeping me sane. Feels good to get all of this out of the way while the bike is still clean. Haven't heard anything on the KLR yet, not sure what the deal is.
Hi swanky, I know this video is a little old now but was just wondering if you had any trouble getting the short screws that attach the main plastic body to the aluminium bars to properly seat all the way down?
I have just put mine together thanks to your video and that seems to be the only thing that hasn’t worked perfectly.
There seems to be a 2-4mm gap between the screw and the surface.
Anyways I hope you can reply and hope you are doing much better now.
Thanks again for the great video,
Take care!
I did have a bit of an issue getting them down tight. Mine seemed to be slightly offset so I had to sort of push them straight while turning them in. One thing you might want to double check is that you've got the right screws. The ones for the extra deflectors look pretty similar and I think I almost switched them at first. Otherwise just push hard and twist!
I'm doing much better and enjoying the T7, thanks!
Great instructions :-) Looks good. Hope you soon will be able to ride that gorgeous bike :-)
Thanks Sven! I hope so too!
Keep up the good work!
Thanks Jeff!
Yeah she's a bit tall . I am 6' with a short inseam and long torso . The balls of my feet touch the ground when all my 210 pounds plus what 25 pounds of protective gear . Thinking about the low seat or maybe the lowering kit but not sure yet . With my weight I am at the top end for the rear stock spring so one day I should look into that or lose ten pounds , haha .
Barkbusters are a good choice.
Hi, nice video
I just bought the same, but they don’t fit in my Tenere 700, ma handlebars is to fat, how can you help me?
Did you buy a set made specifically for the Tenere? They clamps need to be made for the fat bars.
@@SwankyCatProductions
Yes I ordered online for Tenere 700 but they don’t fit, i have 22mm clamps and i think i need bigger one, can you tell me the exact size and type that i need for my Tenere, if you can send my a link when i can see the clamps and kit I need.
Thanks a lot
Like that screwdriver . Funny how the Barkbuster kit says 2019 Tenere only . Think Yamaha have a 2020 and a 2021 Tenere only .
I think it said 2019 on. As in 2019 & after
@@robertlewis3336
Still need to order some , it's about the last thing for awhile I need to get for the Tenere .
8:54 *Stares intensify*
Saya senang dengan video ini.
Thanks you.
This is a early post hope your feeling better
Thanks icey, I am!
So are you getting all new blue gear? ;)
Ride the stock parts that won’t kill you until they break....and the mirror mounts are from RAM MOUNTS
Haha no, I'm going high viz yellow to match the decals.
SWANKY CAT amazing ..can’t wait to see how it goes. I just bought a 14’ CB500x with full Rally Raid set up...picking it Labor Day. Keep the content coming...good luck with the foot.
Nice!!
Thanks!
Kiddo I am so sad for you sitting in that chair it's like watching a guy throw dollars at a gorgeous stripper he will never have LOLOLOL 🤣
Hahaha I'm doin alright, I've been enjoying not having to worry about getting things done all in one day so I can get back on the road. Not having dirt everywhere has been really nice too!
I miss the KLR already :'(
Amen brother,😇 that was the machine, 😎rugged reliable🔧 - made out of metal💪 not plastic 🙄
I think I'll be sad if it really ends up totaled but I'm not to broke up about it yet. Just excited to actually ride my new one... eventually lol
👍👍
👍
9 out of 10 Physicians agree that orthopedic injuries heal faster when the patient has a real haircut.
Jus' sayin'.
LOL
His hair his choice, this is a free country for now bud.
Oh shut up.
@@zrkn1 This joke has been going on for months and months now.
Chill.
I'd like to see the science behind that... haha!
If you don't know how to present, just don't do it. It's waste of time to watch all this.