Ignore all the negative comments. This video saved me $700 to take it to the shop just for labor! It took a few hours but saved me tons of money. I probably will just remove the bumper next time but I wouldn’t have been able to do it without this video! You went over all of it really well and I was able to find all the screws with no problem, some people in the comments just don’t have common sense or a good eye!! Thanks again!
Thank you for taking the time to make this video, reading the comments I removed the full wheel lining at front tyre and obviously the tyre, this made that awkward screw much easier to remove. Also I removed the bolts on the wing just to give bit more room to remove and replace the light.Thank you again, your video was a massive help mate cheers 🍻
The time you spent working through this and also filming it has saved me a whole heap of time today. Thank you!! Though had to break up the activity as it was just above freezing here today 🥶
Thank you my man, saved me a trip to the shop just to take the headlight out, just to take it to another place who fixes them 😁👌 Very good informative vid. I also took the wheel and the front fender liner as it was quite easy to do, cause fender liner is a 2 part, and gave much better access to the far right bolt. Took me an hour to do this first time. Kudos to you
Tnx for the guide it helped me alot it was easier with tyre off and removing plastic behind the tyre. Also put duck tape on upper side of the bumper where headlight is.
thanks mate but it seems to be alot more pain than just simply removing the bumper. Bumper removal on F10 is so much easier and also you suggested removal of the wheel which is more painful sometimes than removing few bolts on the bumper.
Have to really get a bright ass light so you can see the bolt then with an extension and some patience I was able to reach it then unfasten it that was the most time consuming part finding that bolt on the passenger side the driver side you can see the bolt much easier SMH nobody mentioned that part
As I have front lip installed which makes full bumper removal more of a chore. Thank you for this video. I really appreciate it
Ignore all the negative comments. This video saved me $700 to take it to the shop just for labor! It took a few hours but saved me tons of money. I probably will just remove the bumper next time but I wouldn’t have been able to do it without this video! You went over all of it really well and I was able to find all the screws with no problem, some people in the comments just don’t have common sense or a good eye!! Thanks again!
Thank you for taking the time to make this video, reading the comments I removed the full wheel lining at front tyre and obviously the tyre, this made that awkward screw much easier to remove. Also I removed the bolts on the wing just to give bit more room to remove and replace the light.Thank you again, your video was a massive help mate cheers 🍻
Thanks for the comment!
The time you spent working through this and also filming it has saved me a whole heap of time today. Thank you!! Though had to break up the activity as it was just above freezing here today 🥶
Thanks for the view and comment!
Thank you my man, saved me a trip to the shop just to take the headlight out, just to take it to another place who fixes them 😁👌
Very good informative vid. I also took the wheel and the front fender liner as it was quite easy to do, cause fender liner is a 2 part, and gave much better access to the far right bolt.
Took me an hour to do this first time. Kudos to you
front fender liner?, where is that?
@@knaldeglad plastic bit in front of the wheel, inside an arch, held by like 10 screws, has a hatch to access headlight bulbs
Tnx for the guide it helped me alot it was easier with tyre off and removing plastic behind the tyre. Also put duck tape on upper side of the bumper where headlight is.
I learn that i should just remove the bumper. Good vid though. Thank you.
No, just remove the tire.
Remove everything 😅
Way much faster and easier with the bumper removed
Pain in the backside job , ur vid helped me find that 4th bolt thanks next time it will be easier
thanks mate but it seems to be alot more pain than just simply removing the bumper. Bumper removal on F10 is so much easier and also you suggested removal of the wheel which is more painful sometimes than removing few bolts on the bumper.
Thanks for the tip!
Good information. Thx man
Thanks for the vid helped a lot!
really helpful - thanks
A dealer said “it’s just a bulb 💡!” I showed him this. 😂
How long has this taken?
Nice job!
Excellent
What is this Verizon wait/hold music.
TMobile..
Why dont do it the right way and remove the bumper? Literally bumper comes off in 15 mins and not risking scratching it.
At this point I guess it would be quicker to just remove the entire bumper
Maybe
Exactly
Why you recording if you doing first time? For a normal work you need remove front bumper
😂😂😂😂 change the title of the video to - 101 reasons why you SHOULD remove your bumper when removing headlights
Too long of a title. Lol
How to break everything without fixing anything 🎉
Tbh at that point bro just remove the whole bumper, no point going through all that effort to remove half of the bumper 😂
Nah. I didn't.
all bmw 3 or 5 series white cars always and I mean always has some rub on either front or back bumpers. #Fact15
i couldnt really see where the bolts were.
Highlighting them would have been great.
Bloody hell i wish i still had my xc90! Pull two clips out and that was it!!
What year is your F10?
2016
@@TECHIELIFE I have a yellow halo on driver’s side. Possible LED module. Thank you for the video.
Easier to just remove the bumper
I dont get it,you actually removed bumper just not all the way
What part don't you get...
@@TECHIELIFE literally what i wrote. Title is "...without bumper removal" and the bumper is removed
@@headlightdesigngradacac just not all the way ...
Dude what do you mean you basically removed the bumper, talking about I did it without removing the bumper lol
But bumper didn't touch the floor!
Would have been a lot easier if you just took the bumper off. The proper way to remove the headlights.😂
Just remove the bumber u waste more time by trying to work around it
It’s like watching Jerry’s Kids trying to figure it out on the fly! Don’t post unless u actually know what you’re doing.
Aye aye captain!
Ok
Hopeless video 😂
how did you get that rear bolt back in....
Magic fingers
Have to really get a bright ass light so you can see the bolt then with an extension and some patience I was able to reach it then unfasten it that was the most time consuming part finding that bolt on the passenger side the driver side you can see the bolt much easier SMH nobody mentioned that part
U missed a bolt such a useless vid. There’s 2 in the back. N u didn’t show how to get it off