Thanks a lot for the tutorial. I must say I think it's terrible manufacturers are making the batteries so hard to replace. Very poor for the owners and the environment.
Thank you for the video! Seems that my replacement is working :-) I used a suction cup mount from a navigation system, that works well. I was really in doubt that the surface must warmed so long and to such a high temperature. The removement of the old battery was a pain. In a different video, they use a heater and a card to dismantle. The warning "do not bend the battery" is somewhat useless.
Glue everywhere! Very disappointing construction by Huawei. Great video though, thanks A tip for anyone struggling to get the old battery out without bending it (that's how strong the glue is!) Drop a couple drops of lighter fluid behind it to loosen the glue and then work the pick / prytool around there to loosen it a little bit. Don't worry about gluing the new battery in, there's no room for it to move once the case is on so it's really not necessary
Que no se os ocurra despegar la batería usando un destornillador ni nada de metal que pueda perforar la batería. Usad algo de plástico no cortante para sacarla. Si se perfora la batería entrará oxígeno por el agujero, saldrán gases de la batería y explotará.
Thanks a lot for the tutorial. I must say I think it's terrible manufacturers are making the batteries so hard to replace. Very poor for the owners and the environment.
Thank you for the video! Seems that my replacement is working :-)
I used a suction cup mount from a navigation system, that works well. I was really in doubt that the surface must warmed so long and to such a high temperature. The removement of the old battery was a pain. In a different video, they use a heater and a card to dismantle. The warning "do not bend the battery" is somewhat useless.
Glue everywhere! Very disappointing construction by Huawei. Great video though, thanks
A tip for anyone struggling to get the old battery out without bending it (that's how strong the glue is!) Drop a couple drops of lighter fluid behind it to loosen the glue and then work the pick / prytool around there to loosen it a little bit. Don't worry about gluing the new battery in, there's no room for it to move once the case is on so it's really not necessary
And to fix the battery and the back cover,,you use glue again?
Thanks for the video.
If the back glass is cracked badly can u still remove it without any more cracks
簡潔でわかりやすい！ありがとうございます
Que no se os ocurra despegar la batería usando un destornillador ni nada de metal que pueda perforar la batería. Usad algo de plástico no cortante para sacarla. Si se perfora la batería entrará oxígeno por el agujero, saldrán gases de la batería y explotará.
Thankyou for this vedio i can open it thankyou so much
Nice video
Great Job thanks
Huawei 7 P10 LITE?
thank for video, is was easy
Like👍👍👍
thank you!