How to install E-Sys & E-Sys Launcher for FREE! (Step by Step Guide)
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Hi guys, many of you have been asking me how I installed E-Sys, well here is a step by step guide on exactly that!
All download links have been provided, please make sure to like and subscribe to support free car coding, we shouldn't have to pay for this!
If you need the full PSDZData file go to my I-Step video and a link has been provided there, thank you for watching!
E-Sys & E-Sys Launcher: mega.nz/file/b...
PSDZData file (lite): drive.google.c...
New to coding, have been searching around so many forums on how to set up Esys and this is by the far the best tutorial. Thanks so much.
Appreciate it, thanks for watching!
I had many problems with Windows 11 Home, download Windows 10 Home, I disabled my antivirus and I had no problem installing, thank you very much for your help 🔥🔥
thank you very much for posting this video, i finally have all my local radio stations!!! you are a legend!!
Thanks mate 👍
after pulling my hair out about downloading 100 versions of e sys just to do some fdl coding i finally found this. It was funny as im trying to code my HSW and i was watching your instal video on it, didn't think to check the rest of your channel for another other great knowledge. Subscribed!
Thank you for the support bro!
smashed it bro, looking forward for more vids!
Thank you so much for this video. It helped me to get rid of the virtual machine setup. Installation and activation was really easy. I just changed the AC_ON_WITH_AUTO setting in my IHKA. Keep up the great work
Thank you for watching
Bro can you link the website bcuz I can’t see it on his video
@@PhenomHallz
Hi, both links are in the video description
@@stefancl1968my pc says it’s a virus and won’t download
@@PhenomHallz
That‘s normal. I have a dedicated windows installation on an external SSD that is booted from USB. If you want to use bimmer coding and diagnostic software it is recommended to turn off antivirus and firewall. Otherwise you might run into issues when trying to connect to the car
excellent work, thank you ! liked and subscribed !
keep on doing videos !
Thank you for the support!
excellent work, thank you ! liked and subscribed !Thanks so much.
New to all these Zee! A constructive feedback though is that I couldn’t read the texts, may be I just have poor PC. I do like the voiceover if that helps. Great initiative all the same, all seem a lot easier with your vids! Thanks
Thank you for the support, yeah I think the resolution was set a tad too high for this tutorial, have fixed it for later vids if that helps 👍
Thank you! First Tutorial that works😆👍🏻
Come on 😂
@@zeeBMW no i mean first esys tutorial that works😂😅
Mate you're a legend!
Thanks bro 😂
Can you provide a link to your keygen? Your Mega link is down
Perfect, liked and subscribed
Thank you!
Wanted to thank you for the video i really appreciate it! HAD A Hiccup entering activation codes My Pc didn't show as it did on yours but instead it did it after trying to open the app that requested the codes but i figured it out! Thanks !!
No worries, glad to hear you got it working!
@@zeeBMW question, whats the difference between versions? do they have the latest Module updates or just a different way to use it? i see newer versions but if this version has the latest updates i don't see the reason to mess with it! i had 6 updates on my Modules but i was scare to screw up so i just coded my FRM to learn how (bought a used unit) i guess my question is if the updates on this version are the latest for the car or the newer the version the newer updates as well? Thanks
having same issue. can you please assist
may bad! i didn't realize i had a reply! PsDzData is what contains the Updates to your Modules
@@chijiokeudeani9378I can try, where did you get stuck?
Thanks, you are a Machine!!!!
Thank you for the support
Great! Wait for more videos!
Thank you for the support bro, more coming soon!
Thank you so much for the video
Well done, thanks a lot!🙂
Thanks for watching!
How did u get the download link?
Thank you so much, one more sub
Thanks for the support!
Great Help many thanks
Thank you for watching!
Thank you sir .
Np
Come onnnnnnn !!! 🔥🔥🔥🔥🔥
Thank you so much :)
Np
Thanks a lot , mate !
Thank you for the support mate 👍
@@zeeBMW You are welcome 🤗
Hi Zee, Just subscribed as I am looking to code my radio, An amazing video and the best tutorial around, only when downloading from the link its asking for Enter Decryption key
Grandioso, tutto funzionante
Thank you for the support!
thanks, it worked great!
would be nice if there is a video where you can update e-sys?!
I have a problem. When I'm in the launcher, I enter everything with the Activasion code and everything. But then e-sys doesn't open automatically. So it doesn't work somehow.
I have same problem
Same any fix?
When i get to the final stage and click launce the launcher pro closes but Esys doesnt open? How to fix this please?
Bro seriously you are the best! here is a sub!
I have a question, I don't see F90 M5 under target selector or main series, how can I get support for that ?
Thank you bro for the support really appreciate it? I believe you have to use the F10 profile from the selector, let me know how that goes 👍
f90 is a g30
hi there, i downloaded all files, but i cannot find the F15 model in open connection on esys.
Great job!!! Congrats! Would you have another link to data lite, apparently this one isn't working.
Tks a lot!!!
You can find them in a forum, if you search psdz data file you’ll find it, just make sure you get the latest dated one possible…
Hi, i‘ve all the procedures, but when i try to connect with the car, it shows the VIN but the connect button is grey wont let me use it, what am i doing wrong? Btw im using updated version of windows 11
Have you clicked connection via vin?
I am looking for guidance to do egs reset via enet
Hi there mate im really struggling to get past the activation can i get some help thanks
thanks you
👍
Hello sir, This is still work, i got some error when click launch now , thank you
What error do you get?
thanks bro
Appreciate the support bro!
Hi, thank you very much for your tutorial. When I launch E-Sys with the launcher I get this Error Code: Loading E-Sys Launcher PSdz API Module Failed. Error C:\Data\ProgramData\TokenMaster\E-Sys Launcher Pro\Bin\PSdZAPI_x64.dll: Can't find dependent libraries. What should I do? (I've installed PSdZ Lite)
Does this version support BMW F30 2014?
Thanks for the informative videos, i have subscribed your channel today.
I am in the process of upgrading my F31 LCI 330d xdrive which was the basic car without any options.
It had the entry level HU with no satnav.
I have almost done 90% of the hardware changes, some are cosmetic like both front and rear msport bumpers ect.
Inside i have changed the whole interior with all 4 heated seats and m sport heated steering wheel with the cloum switches, HDU, 6wa digital instrument cluster which supports HUD, rain sensor installed, with rear view mirror withe front camera to support automatic automotive head light dip etc.
I will be doing all the codings for these ...
My question is can use a business satnav which i have bought off ebay or do i need a NBT or higher Evo satnav to get everything working.
Please guide which one should i buy.
Secondly how to get my VIN recorded to the used Satnav bought off ebay.
Your help would be highly appreciated, i live in Neston, near Chester.
TIA
Imtiaz
Hi Imtiaz, sorry for taking ages to get back to you, it is preferable that you get the NBT Evo Headunit as you won’t need to get an MMI box to activate CarPlay, yes you would need to get a wiring loom conversion kit but this is a small price to pay for CarPlay without 3rd party accessories. I hope you the best with your modding adventures!
I installed it successfully but I can't choose the car model
Try reinstalling E-Sys and update .net framework drivers/visual runtime drivers
there is something not right about the installation. after activation my esys launcher does not go ahead to laucnch. when i try to relaunch it again its asking for code again
You need to reinstall E-Sys launcher and also update .Net framework
I followed the instructions exactly but after activation and pressing launch, the launcher tells me the est token has corrupted? how do i fix this?
Thank you for your tremendous effort. The link to the PSDZData file does not work. Do you have any alternative link?
Thanks
You can find them in a forum, if you search psdz data file you’ll find it, just make sure you get the latest dated one possible…
why cant activate with activation code as soon as i press launch now it closes the page and never opens?
i have the same issue. Did u found a solution yet?
@@Olchmed no not yet
@@itzorgesi9471 bro i found my mistake
@@itzorgesi9471 in the esys launcher pro, after u chose ur est file and typed in the pin then u press „fdl cheat codes“ and it asks u for a activation code. u copy the activation code from the generator. after that u check all the fdl cheat codes and u press „launch now“. Now heres the important part where i made a mistake. it will ask u for a activation code for a sexond time and now u have to copy the „request code“ from the launcher and paste it into „activation code“-field from the generator. and then copy the „esys launcher response code“ and paste it in „activation code“-field in the launcher. now it will run.
Hi, need your help, I have problem “http server stoped” why it a what to do with that ?
Hi Sir,
I follow the step and install the software,
I have problem when I connect my car choose "edit FDL" and enter PIN,
I type "1234" but no use.
Is there anything wrong?
Did you use the token buster?
@@zeeBMW I have the same issue... but it took me a while to fix it. The source of the problem is - that you start the e-sys with the e-sys shortcut but you SHOULD start it by opening e-sys launcher PRO instead, that's all :)
@@zeeBMW BTW - excellent tutorial, many thanks
Hi. Please, where can I download the token generator?
I’ll relink this as many people are having issues with the MEGA link
I followed all steps one by one after finish installation i got an error that need to contact the creator after i reinstalled again and again when i lunch it it keep saving old configuration and when i press to check fdl sheat cant reach the page for activate again any suggestions please
when i click on the launcher pro it says error occurred and doesn’t allow it to open. I have everything on the desktop just can’t get the launcher and token to open
I can code the EPS on my f10 with this?
hi, during launcher installation - you have 2 black screens - why? i can not install the launcher for this reason, please help!!!!!
Those two times the screen goes black is because a dialog box comes up and I click yes, this is to allow admin access for esys
Having an issue with E-sys launching from the pro launcher, spent hours on it reinstalling and installing. Any tips? I’m from London so if you could do the FDL coding for me as I’m trying to retrofit the 8.8inch pronav I’d appreciate it.
I tried coding without opening through the launcher and says “No EST file chosen (C155), probably because im not able to launch it from the launcher :/
Have you tried using another computer?
Do i have to use the token generator ervery time to start esys?
Hi excellent video!! Just curious on how long does it take to get the activation code for the launcher?
It’s instant 👍
@zeeBMW then something is wrong it didn't activate, nothing happened after I put in the code. 😕
do you have a link also for the FSC Code generation tool ? I will much appreciate it. Thanks
Hello I can’t find Esys link can you share please and if possible to share all other software like nsc inpa … except ista please
bro i have a question is this the crack ? sombody told me if it is crack it can harm the car i dont konw realy just confused about it iam new
Hi i really thank you for your Video it all worked for me. But now i need the psdz full data. Is it possible to download the Version 4.47.31 which u linked and work with a bmw 5 from 07/14? I dont get it which Version of psdz data i need.
Mega is asking for a decryption key?
I’m going to relink the software as many people same to be having an issue with Mega
Hi, need your assistance as mega is asking for decryption key 😢
Can I code my adaptive suspention off with the lite version? (already physically removed. but just comfort mode available)
AFTER INSTALLING EVERYTHING CORRECTLY AND THE SOFTWARE OPEN AND WORK JUST FINE, THIS ISN'T FOR E-SERIES LOL
Thanks, but data file no longer available?
Hello, would this work using a laptop with Windows 7? Thanks.
Yes this will work with Windows 7, just have the correct .NET drivers installed
It asks me to: enter a valid decryption key
Does this still work with same pdszdata? I’ve downloaded a newer one and I can’t read fdl, and I’m in the middle of doing a screen replacement
It should still work with a newer one, it could be that it’s corrupted, did you try another psdzdata file after this issue?
Hi, do I always have to open esys through launcher or just once? Because looks like now when i just open trough normal esys it works as it should 🙄 where can i see until when my licence is activate ? Thank you
You have to open it through the launcher as you won’t be able to edit or open cafd files 👍
how to downgrade 325i ecu software version？
It is asking me for a description key
Same here
Can I share the psdzdata with mklink so that it doesn't take up so much memory? esys + ista
I haven’t tried that, you can go for it and see what happens.
@@zeeBMW Yes it works
one wuesion more if i put in theactivation code it only come 1 time and when i click launcch now second appears and after i put in the code the prrogram get down and it does nothing
Have you tried to update .net framework drivers also what OS are you running e-sys on?
where you gunna upload next
Here and soon bro, been busy with work!
Hi,
installed everything but can't edit maybe because my BMW 320 Mild Hybrid is too new,
any suggestions?
Thank you so much
🙏
What year is the car?
2021
@@salentovideoweb I believe the ecu needs to be cracked before you can do fdl or ecu coding on the models above 2019 due to BMW locking them. This maybe the reason.
I installed this but when i go to program the CAF data on my bmw g30 the folder is empty so i cannot program it? any suggestions?
Have you launched esys using the esys launcher pro?
Hello sir, I’ve followed all of your steps and coded my car, Thank you! I do have one question, I saw that there are a lot of different versions of the Esys and pszddata files on the internet, do these matter or are they all the same? I coded a F33 (2014) and a G30 2017 without any issues but i’m scared of bricking the ECU’s
It is recommended using the latest psdz data you can find, the E-Sys version uploaded is suitable for the g series chassis but won’t be for future chassis. Unfortunately, this is the only version that’s cracked and allows free use…
i want a 300gb PSDZData file
this is the lite version right
Having problems to download the launcher.
My Win10 always erases the downladed file (virus detected).
Anyone can help me to fix this ?
This is not a virus, it’s a false positive due to e-sys not being a common application that would be installed
Sorry man this does not work any longer :(
Token is expired.
Seems to work fine for me bro?
hi after i clicked on the launch now button, the app closed just like in the video but the esys application didnt run afterwards. pls help!!
Have you updated your .net framework drivers? If you still face this issue try another computer, also what OS are you running?
I am having same issue.
when i try to open the launcher it asks me what i want to perform repair, modify or uninstall, i believe i did everything correct?
Uninstall and reinstall it again, what OS are you running?
Need to clear some doubts regarding the retrofit before me starting on my own. may i get your contact details.
Have you got instagram or any social media?
I heard you dont need the launcher no more is that correct? I have esys with the full psdz data files already
You need the launcher to read and fdl code bro, otherwise it doesn’t allow you to open or amend properties…
Hey one question When i will read the Control Unit it says no EST file Chosen do you know hat’s the Problem
No clue, did you follow the steps correctly in the video?
It ask me two times for activation code after that it close 😞
Reinstall and see again, did you allow esys launcher as a trusted application in windows defender/firewall?
Thank for your answer but I found another video more clear than yours and I did it😊@@zeeBMW
Trynna open the mega link, it says i need a decryption code? Can anyone help
Use a VPN and download the files
@@zeeBMW will I be able to do it on a phone or is a laptop needed? Considering I tried VPN on my phone and still no luck
The link says I need a decryption key
Use a vpn and download
Hi mate, I'm having issues with the Mega link, after it downloads, if I attempt to open the folder, my Windows PC tells me access is denied and then I get a Windows Defender notification saying viruses have been detected. Any help you can offer?
Turn off Microsoft Defender before you do anything
Yes turn off windows defender, it should work
I have done everything is per video but when i enter codes it just closes the launcher and nothing happens can someone tell whats going on?
Are you still facing the same issues? Did you try installing a newer version of .net framework?
@@zeeBMW Yes latest framework installed I dont understand as soon as i enter activation code it closes that window but on your video it stays after you enter activasion code and then you entered esys response code ;/ Can you help me please what i am doing wrong? ;/ maybe you could do remote help for me ;/ I would even pay you some money on paypal if you want ;/
@@justboyjustboy2681 no need for that bro, what operating system is your computer running?
I have tried on 2 laptops both running windows 10 one of them is on windows 10 pro
I have installed latest frameworks java everything as needed :/
@@justboyjustboy2681 strange it should work, try installing windows 11 and install esys and use token buster without internet enabled (turn off WiFi)
HI, i cant download psdzdata please help thx.
What seems to be the issue with downloading the file?
Is it compatible with windows 7?
It should work but I’d suggest using windows 10 and newer
What cable do I need to go with this software? Cheers
You need an ENET cable, you can get them for less than £10/$10 on eBay
You need to slow things down a touch, your pointer is darting about all over the place highlighting various numbers with very few instructions, it's maybe okay for normal people, but I have a health problem that affects my concentration!!
I’ll keep this in mind for future videos thank you for watching!
Non disponible
The link should work?
hello is possible to have the password of the link mega please
There shouldn’t be a password?
Password required@@zeeBMW
Why u moving so fucking fast.
Super video my bro❤️👍🏼smashing the BMW coding and giving us people a huge help. Any way to contact you by any chance? Would like to collaborate with you, and enquire about this further couldnt find an email to shout you to be fair.
Thanks bro really appreciate it, couldn’t reply to this comment on the yt app… give me your insta or social media link and I’ll help you out bro 👍
hey hey, activation code is not working anymore. Shall i email tokenmaster to request a new one?
The error Says "EST Software Token is Invalid. Invalid token". Has the token generator maybe expired?
Try reinstalling esys launcher pro it should still work I’m using it currently…
Hey Brother,
Appreciate your work very much. could you please drop the link for full pszddata?
Thank you in advance
Check out this video, link is here:
th-cam.com/video/55r6e7kImrk/w-d-xo.htmlfeature=shared
HELP, when i'm trying to response activation code, its loading more (loop), what should i do? (OS Windows7)
You need to use Windows 10-11 for this to work
can this be used on windows 7 or do i need windows 10