How to Replace Window Regulator with Motor 98-11 Lincoln Town Car [PART 1]
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Buy Now!
New Window Regulator from 1AAuto.com 1aau.to/ia/1AWR...
1A Auto shows you how to repair, install, fix, change or replace a broken, cracked, damaged, slow-moving, or stuck power window regulator and motor. This video is applicable to the Lincoln Town Car, years 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, or 11.
🔧 List of tools used:
• 10mm Socket 1aau.to/oxT/1AX...
• 11mm Socket 1aau.to/oCb/1AX...
• Needle nose pliers 1aau.to/oeS/1AX...
• Needle nose pliers 1aau.to/oeS/1AX...
• T30 Driver 1aau.to/oie/1AX...
• Ratchet 1aau.to/oI7/1AX...
• Socket Extensions 1aau.to/oCb/1AX...
• 5/16 Inch Drill Bit 1aau.to/oJ/1AXA...
• Drill
• Center Punch 1aau.to/oaN/1AX...
• Chisel 1aau.to/oaN/1AX...
• Hammer 1aau.to/ofj/1AX...
For More Info visit us at 1aau.to/h/ahW/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![How to Replace Window Regulator with Motor 98-11 Lincoln Town Car [PART 2]](http://i.ytimg.com/vi/yizRG2dIgMc/mqdefault.jpg)
![How to Replace Window Regulator with Motor 98-11 Lincoln Town Car [PART 2]](/img/tr.png)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You show punching the center of the rivets out for the motor and regulator but when you drilled the rivets for the glass they were already punched out. How did you punch them out without breaking the glass? I'm afraid of hitting them as hard as I did the other for fear of breaking the glass.
Bought a used 2000 Jaguar S-Type recently and found out the front regulators and motors need replacing. Bought them a little while ago at your site glad you had them combined. I also appreciate the video in that it helps me to see what the shop will have to do in order to replace them. I hope these new ones last for a very long time. I heard that Jaguar had put in ones that easily break originally aka cheap part.
Thank you for watching!
888-844-3393
Great video. My window motor stopped working. Tried a replacement switch, but that was not the problem. With this video, I removed the door panel and the window motor (left the regulator in place.) On my workbench, I hooked up the motor to my jump-starter to test it separately. At first it did not turn, but then I turned the shaft manually for a bit, and tried the power again. Viola! The motor started working on its own again. I tested both directions by reversing the electrical hookups (switch red and back fro the jump-starter.) Re-installed and my window is working once again! Maybe this is just temporary , as I don't know why it 'locked up' in the first place. But for now I can send the replacement switch back (eBay) and the only thing I am out so far is the return postage, and my own labor on doing this myself. THANKS!
Just replaced my regulator. Great video. A little grease on edge of window made reinserting window much easier. Thanks.
+Mitchell Belser Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Normally you can remove the regulator and motor assembly together.
+Deb Harris It may be a similar procedure, but we currently do not have an install video for the 1997. Thanks for checking us out!
Doing this today... Thanks for the help!
You may want to take a look at the window regulator to see if it has broke.
My driver seat isn't working, it's stuck in its current position and i can't move it. Would replacing this part fix the problem?
THANK YOU THANK YOU THANK YOU!!!
Your vid part 1 & 2 Saved me!!
Even though I have 1997 this help amazing!!!
Thank you for watching. Please let us know how the repair comes out!
1aauto.com 888-844-3393
It came out perfect!!! No more tape holding my window closed ...lol...
It took about 1 1/2 hours, little longer than it probably should have but everything works !!! Thanks again!!!
Wow. Looks like a lot of work
Wuts tht lil black box called right by your head/near side mirror with th wires coming out.when i go to let my window up a clicking sound comes from tht box....THANKS
hey friend i found the problem and fixed it it was the little cog that was worn and i bought the two motors fronm someone that has my same car but junked and he let me had the two cogs and replaced mines with the cogs i took from the other car and now the windows works aggain thank you very much friend you saved me money =)
About video on replacing a quarter vent side rear small window on a town car 03-11 ?
they rivited the glass to the holder thingies ahahaha
Thanks. You saved me over $200
Do I need to do anything to make the window work new motor and new switches for the window in drivers door Lincoln Town car
Unfortunately when doing the regulator you have to remove the window out of the door. If you have tint there is a 99% chance it will scratch when putting the window back in.
Thanks for watching our video! +dozer m.
Your comment worried me but if you use masking tape a couple layers on the window it saves the tint worked amazing today when I did mine
Can this same method be done to a rear window of a Lincoln towncar 1990 ?? It has a quarter panel that has a small window that’s stationary..??
We currently do not carry them for that particular year.
Do I have to have a drill or can I use a screw driver sir?
I( heard a big pop and then my window would only go down? do i need to replace everything?
Ahh. If it breaks again on you in the future, we also sell a repair kit that replaces these part # 1ABMX00097 on our website 1aauto.com Have a great day!
at 8:21 the plastic washer/grommet that is yellow.. that is the parts I need. What are they called? I have a 2003 Towncar.
helpful video. thanks! just did mine!
Good work! Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/1998-11-lincoln-town-car-window-regulator-front-pair/i/1awrk00376?TH-cam&CTA%20Comment&ATony
BTW i forgot to tell you my car is a lincoln town car 1988 ,5.0 litter a 302 engine and its a four door all electric front seats mirrors etc..my question is do you still sell the repair kits for this old model?
what did you replace the rivets with? did you put screws and nuts back in their place?
Thank you for watching. You are correct you just nut and bolt the whole thing together.
1aauto.com 888-844-3393
In order to take out the regulator do you have to take out the motor also?
He says 2.5 cm but t6 bolts come in mm so itlls be 25 mm t6 for the windows and 12 mm t6 for the other bolts that your replacing instead of the rivets it comes with. Use stainless steel its a window water might get down there you can find them at any home depot or lowes store except home depot didnt have the 25mm window bolts just the 12 and then some 20 and 30mm . But went to lowes and got the 25 mm thats needed. Also theres a bracket on the inside that holds the windoe motor to the door sill thatll come out dont throw that out you need that doesnt come with a new one. To drill the rivets out you should start with a smaller drill bit then go larger he made it look real easy but even after dilling them out geting the rivets out and the rivet head off is difficult.
the parts the hold the window to the regulator: what are they called and where can I get some?
Have a 2003 Lincoln Town Car and whenever I try to drill out the rivets they don't stay on Center. Even though I sent her punched it does nothing
Stupid question? How do you know if your motor is bad or if it's your regulator? My window will only go up about 1/2 in at a time... (driver's side). Passenger side, sometimes won't engage at all, but when it does, it goes up at normal speed... HELP ME! Thanks.
P.S., It's a 2000 Lincoln Town Car... 4 door.
Ever get it working my friend? Bout to get my hands dirty with this one and suspect the same thing. My windows all started pooping out around the same time. I suspect it’s that motor with the tiny delicate cogs...not regulator which is just a track secured in place.
Do you have vid for rear window regulator?
+Robert Porter We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
Is this video compatible with a 1996 Lincoln town car sig. ed.?
Thank you for watching. The process may be a little different. We will keep this vehicle in mind for future videos.
888-844-3393
Can you Please do a video on the 1980-1989 Tow Car @1A Auto Parts, thanks@!
+Randy Lee We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
@@1AAuto thanks! it would be appreciated! Do you have any videos on AC leak checking on a 2007 Silverado?
+Randy Lee No problem! We do not have a video on that issue either, so we will add it to the list.
that little motor is the same as my car what does really fail the motors works but the glasses wont go down please help me
Can this be applied to a Lincoln MKS 2009-10
+Bitemyshinny Metalass The installation process should be incredibly similar for your vehicle.
@@1AAuto ok thank you
2007 town car both front windows wont comming down
What if you can force the window down I can’t
i will thank you =)
Still didn’t show how to wire it
Replace window regular driver door 2001 linclon ls