Looks bloody fantastic Kyle 👌.. As I said on Fb mate bloody deadset credit to you mate.. I'll be doing my Z when I finally get back into it mate.. Keep up the great content mate 👍 👌
GMH didnt get them very good to start with my old man bought 3 new different years OZ & NZ assembled none were particularly good yours looks better than any ny dad owned new or the 7 or so used ones I bought
Hey mate, I’m a complete novice hoping to tackle this kind of thing with my HQ down the track and learned a lot from your video. I like the voice over with the time lapse approach you’ve taken, it’s great getting your commentary as the work is being done. Keep up the good work.
Nice work. You make it look simple. Guess it makes sense but had no idea those quarter panels had solder in them. Always wondered as a kid if they joined them or stamped them out of one big sheet. Now I know.
Great video, just wondering what the panel to panel gap height will be like when new rubbers are fitted and latches may need to be adjusted for doors and boot to work properly again..
Yes mate that is very true. I’ve already been through that with the initial fit up of the panels and have ensured that there will be enough room for the rubbers. Doors and strikers will always need some minors adjustments as the car is assembled, weight of the glass/regulators ect. In this video I was just focusing on removing the ‘butting’ of the panels ensuring the panels sit flush with one another as much as possible and making the panel gaps more consistent than what they were. 👍🏼🇦🇺
nice work.....what would be a good guess at time involved to gap car?.......something i will do to mine next year.....really cleans up the look of an old car..
I spent about 3-4 days going around this one but it was pretty good to start with. If I wanted to match everything millimetre perfect to each panel I could have spent another week or two or more. Lol
Very good, great experience in those techniques
One channel, leads to another. ;) 👍
@mickgatz214 you’ll have to tell me who’s leading to who 😂
Very impressive work mate, and a lot of experience for a young bloke, keep up the great work
Looks bloody fantastic Kyle 👌..
As I said on Fb mate bloody deadset credit to you mate..
I'll be doing my Z when I finally get back into it mate..
Keep up the great content mate 👍 👌
Well done mate, keep at it. I drive a HJ 76 Kingswood, Hope to spot you about in Melbourne some where, Cheers
GMH didnt get them very good to start with my old man bought 3 new different years OZ & NZ assembled none were particularly good yours looks better than any ny dad owned new or the 7 or so used ones I bought
I learnt a thing or two here, love the HQ styling and what you have done so far looks good, keep at it man. 👍
Thanks for watching.
Awesome update and tips, will help a lot of others, Cool Show🤗
Always watching👊
Cheers 🍻🍺KC
Cradle Mountain Tasmania Australia 🇦🇺🇦🇺🤝🇦🇺🇦🇺😎👍
Good job mate ,nice clean lines and gaps too job 👍
Stick a WB Front; & Tailights. ;)
Awesome video Gary been hanging for this one since you’ve gone fortnightly ,great work as always 👍
Hey mate, I’m a complete novice hoping to tackle this kind of thing with my HQ down the track and learned a lot from your video. I like the voice over with the time lapse approach you’ve taken, it’s great getting your commentary as the work is being done. Keep up the good work.
Glad you enjoyed it. The voice over commentary took me forever to edit 😆
Very informative great video iam up to this stage cheers
Hey Kyle you'll have to wear the hardcore Centreline shirt I gave you when you're working on the car
Haha that’s a throwback. I’ll chuck it on for ya next video mate
Looking good mate well done 👍👍👍
Good onya mate, love watching your efforts and growing skill set.
Nice work. You make it look simple. Guess it makes sense but had no idea those quarter panels had solder in them. Always wondered as a kid if they joined them or stamped them out of one big sheet. Now I know.
Love your work mate. Killer.
Funny, as I'm watching your video. The WB was only released as a ute?. I don't recall WB models in station wagon or sedan. Just a thought.
Ute, Van, Tonner and Statesman.
Your channel popped up after I watched that S.A dude and his hq ute. :) (or wass he from W.A?)
Great video, just wondering what the panel to panel gap height will be like when new rubbers are fitted and latches may need to be adjusted for doors and boot to work properly again..
Yes mate that is very true. I’ve already been through that with the initial fit up of the panels and have ensured that there will be enough room for the rubbers.
Doors and strikers will always need some minors adjustments as the car is assembled, weight of the glass/regulators ect.
In this video I was just focusing on removing the ‘butting’ of the panels ensuring the panels sit flush with one another as much as possible and making the panel gaps more consistent than what they were. 👍🏼🇦🇺
Any chance doing a video on the swage lines?
Can do when I’m up to it mate.
nice work.....what would be a good guess at time involved to gap car?.......something i will do to mine next year.....really cleans up the look of an old car..
I spent about 3-4 days going around this one but it was pretty good to start with.
If I wanted to match everything millimetre perfect to each panel I could have spent another week or two or more. Lol
What happened to the yellow ute you were showing us how to paint? We need an update please
It’s still there waiting for me. It’s just been far too cold to get any paint on it currently.
I reckon a 4" steel reverse cowl would look good mate 😉
Doesn’t need it