in my experience( everyone is different) buffing fresh paint like that will dull out and need to be rebuffed in about a month, its best to wait a few weeks and then wetsand and buff, and extremely important not to coat or wax paint even after being baked in a booth for 3-6 months in order for the solvents to escape the the paint completely. the paint will get hazey and ive ben told it can cause solvent popping. every shop has different procedures tho
The XRS models are way better, they came with the 2ZZ-GE, a way faster high Revving high performance engine, and they only came with a 6 Speed Manual Transmission. The S models are shit, and slow.
@@abedawg94 They're not the same price the 8th Generation Corollas XRS models are 6 to 7 Grand. An S model with a 1ZZ is $4,000 I suggest you do your research before commenting.
Great job!! I really like the outcome. I hope I can be like you someday. I painted my car before and it came out badly. Now, i kind of want to redo it again since I have all the proper equipment I needed. However, I am still confused which sand paper grit should I start with. I am shooting for a better result not a professional result. My goal is to correct the paint I did before.
Bradley Pedrozo I appreciate that man thank you so much! And man get out there and redo it. The best way to learn is by just tuning your skills every time. Change it up. If you go one way and it works keep leaning that direction. Or if you try something and it's worse do that thing less. You got this brother
BodeVision thanks for the advice.i have a few paint projects that ima try and get done within a few weeks .hopefully it comes out clean like this corolla.2 questions is primer absolutely necessary,if so what is as good brand to use?
Jose Hernandez I use U-pol, it's a lower cost filler primer. It is not necessary unless you're spraying over metal or bondo. Bondo must always be covered with a primer or you'll see it in the base coat. If you're spraying new parts like a bumper you can just do base right on top but I would recommend using an adhesion promoter. So in other word if your not spraying over any metal or bondo you can just go right to base but you might have to do more coats for full coverage. Painting is a lot about preference. Going with primer first is and extra step but I always do it to make sure the job is consistent and that's how I have the best results Hope that helps
Jose Rodriguez i appreciate that so much man, thank you. Also, I'm content with the way my channels growing. My first video was uploaded at the beginning of this year and for me to have already hit 1,000 I couldn't be more excited. I know it will get there eventually!
Awesome job Bode! After you wet sand and buff does that reduce the amount of clear coat left on the vehicle? Like will it always look dull after a wash and you’ll have to wax it?
Wet sanding buffing doesn't stands for quality,the clear itself is more durable before u cut and buff it my thought,I do used to wet sand,buff for visual perfection
Yeah man its a 64, close guess! Ive been working on that as a shop car/truck for a couple of years. I got so deep into the project that ive really slowed down progress in the last year. It has all new suspention, mustang two front end, front and rear discs, a 302 from a fox body mustang. Ill get it going eventually lol
BodeVision its going to look good afterwards i have a 1963 ford falcon sedan all stock on the outside it has also a 302 and i have my lowered but i stopped working on it since im selling it
You did a nice job on that Toyota Corolla bro What’s the other work you doing cars any other upgrades Drop a comment down below let me know 2020? 2021?
That still have some dents? Imagine if he paid full price for all them dents. Well he maybe some cars2mater attached to this cars dents But damns That car, she sexy
Man. Good job bro. The more and more I watch ur stuff the more I want u to paint my car. 👏
Msp-Protege yeah man lets get it locked down
in my experience( everyone is different) buffing fresh paint like that will dull out and need to be rebuffed in about a month, its best to wait a few weeks and then wetsand and buff, and extremely important not to coat or wax paint even after being baked in a booth for 3-6 months in order for the solvents to escape the the paint completely. the paint will get hazey and ive ben told it can cause solvent popping. every shop has different procedures tho
not hating just trying to share what ive learned, paint job looks great👍
Lol I have a carolla that’s the same body style as that. I nicknamed mine the “carolla virus” 🤣
It looks Brand new wow
Turned out great. A well done video.
Wow! That model Corolla's pretty tight with a nice paint job. And "tight" isn't even in my vocabulary. I almost want one.
The XRS models are way better, they came with the 2ZZ-GE, a way faster high Revving high performance engine, and they only came with a 6 Speed Manual Transmission. The S models are shit, and slow.
@@static_Tricolor_camry oh yeah good thing they’re like the same price right?
It’s like me saying “oh bro just get the ISF ITS WAAY faster brah
@@static_Tricolor_camry it’s obviously faster but but I don’t think he got the Corolla bc he thinks it’s fast. Plus the 1.8 isn’t shit it’s just slow.
@@abedawg94 They're not the same price the 8th Generation Corollas XRS models are 6 to 7 Grand. An S model with a 1ZZ is $4,000 I suggest you do your research before commenting.
@@static_Tricolor_camry Woow thanks brah!
Toyota Corolla I think that guy should pay more money for that paint job Custom Toyota Corolla Nice job on the car bro 😎
Great job!! I really like the outcome. I hope I can be like you someday. I painted my car before and it came out badly. Now, i kind of want to redo it again since I have all the proper equipment I needed. However, I am still confused which sand paper grit should I start with. I am shooting for a better result not a professional result. My goal is to correct the paint I did before.
Bradley Pedrozo I appreciate that man thank you so much! And man get out there and redo it. The best way to learn is by just tuning your skills every time. Change it up. If you go one way and it works keep leaning that direction. Or if you try something and it's worse do that thing less. You got this brother
What kind of coil overs did you use? And what kind of wheels are those! This thing is clean
Hey, I'm here in Orlando and I want paint my car same year of this one...where can I see you?..I liked it.
Dope man I've been wanting to learn how to paint cars
It's all about practice and adjusting mistakes. You'll get it man! Just go out and pick up a cheap spray gun and start laying down paint
BodeVision thanks for the advice.i have a few paint projects that ima try and get done within a few weeks .hopefully it comes out clean like this corolla.2 questions is primer absolutely necessary,if so what is as good brand to use?
Jose Hernandez I use U-pol, it's a lower cost filler primer. It is not necessary unless you're spraying over metal or bondo. Bondo must always be covered with a primer or you'll see it in the base coat. If you're spraying new parts like a bumper you can just do base right on top but I would recommend using an adhesion promoter.
So in other word if your not spraying over any metal or bondo you can just go right to base but you might have to do more coats for full coverage.
Painting is a lot about preference. Going with primer first is and extra step but I always do it to make sure the job is consistent and that's how I have the best results
Hope that helps
BodeVision thanks man very helpful I appreciate your time and am looking forward to more videos,keep them coming.
Came out great!!!!
It looks like a dream
I have a Corrola XRS and your car is cool
What's the price for a job like that?
how much do you charge it came out very nice
Another great job dude!
Oh waaow.. That' came out hella nice! What do you call that colour though?
Came out dope very great job brotha.
You deff deserve more followers then what you have bro 🙏🏽👌🏽
Jose Rodriguez i appreciate that so much man, thank you. Also, I'm content with the way my channels growing. My first video was uploaded at the beginning of this year and for me to have already hit 1,000 I couldn't be more excited. I know it will get there eventually!
Just bought an 06 xrs. I think i'll do something like this.
great paint!
crazy jobb
What about the door jams. Did you do those
I am impressed
Dude that was Awesome man !!! Looks really Great where are you located?
Nice job brooooo I got corolla 07 same color. .but thiz car badass dude! !!!
Oraleeeee H-TOWN
Sup, I’m new with cars and wanted to know what I should be paying for a nice paint like this so I won’t get overcharged?
I wish you could do my slammed 98 civic 4 door, light gray
Is that gray expensive? What's the color.name or code?
สวยครับ..
awesome job
How much base coat did it take to paint and how many coats
Great job. How much would that be?
My first paintjob was silver it was super hot and I had fast reducer too. The entire thing was dry spray I just cleared it anyway. LOL
how much do you charge to paint?? And where do you live
What’s the specs on the rims/tires ?
Was that a factory color ? And what would you charge for that ?
Specs for the wheels/tires an coilovers
How much was that paint job looks clean
nice job looks ansome factory new car
Thanks rick!
Can't believe you didn't even show a 360ﾟ view of the finished product with the hood back on the car after everything was all polished up.
How much did all that cost?
What part of Florida are you are
Wow thats a clean ass job!
Thanks so much!
Awesome job Bode! After you wet sand and buff does that reduce the amount of clear coat left on the vehicle? Like will it always look dull after a wash and you’ll have to wax it?
I’d like to know as well?
That came out GREAT!! what color is that? How much did you charge for a job like this? Cheers
Giovannie Cornejo thanks so much man and I usually charge $1500-2300 depending on body work needed
Wet sanding buffing doesn't stands for quality,the clear itself is more durable before u cut and buff it my thought,I do used to wet sand,buff for visual perfection
You did a great job on that Corolla. Where in Orlando are you?
What kind of wheel are those. And where you bought it??
Chingon chingon
Where are you located and how much do you charge for that corollas paint job? I can a white one that might wanna go go all black. I’m in West Palm
What size wheel and tires are on your corolla
Pretty sure the rims are 15"
Probably 18x8, definitely not 15s, use a website to determine fitment
good job but dam that 1965ish ranchero looks good
Yeah man its a 64, close guess! Ive been working on that as a shop car/truck for a couple of years. I got so deep into the project that ive really slowed down progress in the last year. It has all new suspention, mustang two front end, front and rear discs, a 302 from a fox body mustang. Ill get it going eventually lol
BodeVision its going to look good afterwards i have a 1963 ford falcon sedan all stock on the outside it has also a 302 and i have my lowered but i stopped working on it since im selling it
I wish i could have you paint my 04 corolla. It's the indigo blue. Need i say more?
😭😭😭
lol we can make this happen if you bring the car to orlando
800 grit pretty fine, no?
Bro6 lookd goodd o lole. How you paint. Lookd vlean amd mice6. Bro. How miuch i. Goy3
6. Corola 2p2p se. I lile6 on whote
You did a nice job on that Toyota Corolla bro What’s the other work you doing cars any other upgrades Drop a comment down below let me know 2020? 2021?
I put a LS1 in an old honda.
@@BodeVision That’s wassup. Keep up the good work bro
rear window visor/spoiler where u get?
Location? I’m looking for someone in my area that paints... I’m in Pennsylvania
Dude what Electric sqnder you use.
Rodolfo Pierre I use the Makita BO5031K 5 in. Great light weight sanded. It's a little more expensive but well worth it.
Wheel specs?
yo where u get that rear window spoiler?
he probably got it on ebay bro.
BodeVision aight thx my dude
U strill paint? U have a shop?
yeah man my shop is whats in the video. Shops in Christmas FL
My mom drives one of those haha
hahahahah
rim specs please thanks
Good job man but hey man walk the body of the car don’t paint in panels that’s why you getting to many dry spray
Thanks for your feedback man i appreciate it and thank you for watching!
How much do you charge?
Jabbaweezy 1600-2500 depending on size of car and body work needed
anybody know the owner ? i’m in orlando ,, i want that rollaaa lol
That still have some dents?
Imagine if he paid full price for all them dents.
Well he maybe some cars2mater attached to this cars dents
But damns
That car, she sexy
That car is still a Corolla right? No usable horse power. That's kind of a waste.
Bruh click bait with that design that you never threw on
oSSo Garcia fr though
and THANK GOD he didnt. looks good solid.
Agreed click bait
How much did this all cost?
more than 10,000 less then 20,000