corksport CST5 E48 30psi at peak. 2nd 3rd 4th gear pull in Mexico! 😘 8k redline.
ฝัง
- เผยแพร่เมื่อ 26 ต.ค. 2024
- overspeed built engine
cst5 iwg turbo
e48 ethonal mix
returnless 8th port injection
tuned by Will at PDtuning
corksport intake and exhaust manifolds
corksport 3.5inch intake
tr8 treadstone fmic kit
corksport 3.5 inch turbo back exhaust
Need to see more content for this car. I have same setup on my car but i have been having a few issues never got to finish my tune 😕. Car has been sitting for a while
Same here, should have just bought the motor, would have saved me a lot of time and headache
that thing pulls hard !
I love my ALL Bone stock 2013 mazdaspeed3 in Velocity Red Mica 85K on the clock a very fun car to drive...
Even more fun with the right mods. You're leaving 60-70 easy HP on the table. 119k and modded since new on mine, still going strong at 280whp 11 years in. The whole powertrain is overbuilt on this platform.
@@jamesrather1510What do you have installed?
I seen your port injection vodeo comments are off i wanted to ask what cc is your injectors on the returnless set up. I have 6 port now and want upgrade to 8 port soon
Shit i didn't realize they were. It shows the injectors in the videos... I show everything I used. They are id1050x.
@@gimmethecarkeys thank u so much! I'm going to aim for 550whp on 93 pump gas if possible. But anything fast and reliable I'd be happy
How much boost does the k04 make ?
K04? Junk... lol.
Anything after 18 psi is a waste on a k04 and they don’t last long at that level either they are straight garbage a cst4 is the minimum I would ever put on a speed3/6
@@lokimodified7680i ran my Ko4 at 22psi on E30 for 2 years and the engine got low compression before the turbo shit the bed. They are junk though from all the failures i’ve seen just never happened to me personally
@@lokimodified7680made 312whp on the dyno
@@brotherhood_ofstreetracers4268 I get what you mean the real problem with the k04 and the reason I said 18psi is because 18psi is where the k04 maxes out its thermal efficiency range and starts producing a lot more heat energy that’s why a cst4 at the same boost level produces more power
What was your final hp
Never dynoed... most cars with setup are at 500whp. People have made 530whp with straight e98 in a separate fuel.
@@gimmethecarkeys ok yeah me and you pretty much have a identical set up
👀
8560rpm from wangan midnight series. Do you wanna try ?
@@szymon6207 Wangan the Anime?- Nice. I haven't revved that high - yet, I barely ever touch 7k and my bottom end is built with H tuff plus rods. You upgraded the valve springs and cam?
What internals?
Just a manley rod piston with studs and upgraded valvesprings in the head. No porting.
Hpw much power at this boost lvl?
Most cars with this setup make 490-530whp.
My Gen2 Forged engine with E50 Mix with G30-770 makes at 21psi 490whp and 453lbs torque at 7800RPM
@MrJorgecoste thats a big ass turbo im using cst5 at 26psi right now as for aux fuel im using 36hpg combined direct port meth injection... i havent dynoed it yet but im stock valve train with rev limit at 6.7k
@@zakura70jr LOL i don't have DI , just Port Injection tho , stock valves, ported head , 88mm 9:5.1 compression , with 2000cc injector Dynamics
@@MrJorgecoste so how did you delete the DI system then?
Esta en mexico almenos ponle gas nmmes
9rpm on mazdaspeed mice😅
The rpm gage is light off at high rpm so maybe 8000rpm
it's not healthy.
How so?