12 COOL TOOLS THAT ARE REALLY WORTH BUYING
ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- Salty Popcorn ► goo.su/bnU7S
1) AX Ideas (Preview)
+
1.1 Orit B.V Handy-Man (Preview)
• ORIT B.V. - Sand Lime ...
• ORIT B.V. - ABH Brick ...
+
1.2 Orit B.V Octopus (Preview)
• ORIT B.V. - Lifting Cl... • ORIT B.V. - H-360 - H-...
2) Debarker PRO (Preview)
• Debarker PRO / Barkefr...
• Dolmar 9010 + Debarker...
• Кородер не бензопилу Х...
3) Jackman Brute Socket Fusion Power Clamp
• Jackman Brute Socket F...
4) Hilti CFS-SL
• HOW TO Hilti Brandschu...
• HOW TO install Hilti C...
• HOW TO install Hilti C...
• Sleeve Antifuoco CFS-SL
5) SpikeEase
• SpikeEase: The Best Sp...
• SpikeEase - Battery Op...
6) Lock Jaw Ladder Grip
• Lock Jaw Ladder Grip D...
• Swedish Fire and Rescu...
7) Kreg Panel Carrier
• Kreg® Panel Carrier
8) WORKPRO Cordless Reciprocating Saw
• WORKPRO® Tools | 20V C...
9) Hyde Tools 4-Inch Roller
• Hyde Tools 4-Inch Roll...
• Hyde Tools 4-Inch Roll...
10) Kreg® Quick-Flip (Preview)
• Kreg® Quick-Flip
11) WEICON Tools Fibre Optic Stripper (Preview)
• Schnelles Entfernen vo...
• Abisolieren feinster D...
12) RUNPOTEC Cable guide roller
• RUNPOTEC Cable guide r...
00:00 - Lock Jaw Ladder Grip
01:03 - RUNPOTEC Cable guide roller
02:03 - Hilti CFS-SL
02:59 - AX Ideas + Orit B.V
04:00 - Debarker PRO
04:53 - Jackman Brute Socket Fusion Power Clamp
05:39 - Kreg Panel Carrier
06:41 - WORKPRO Cordless Reciprocating Saw
07:40 - Hyde Tools 4-Inch Roller
08:45 - Kreg® Quick-Flip
09:28 - WEICON Tools Fibre Optic Stripper
10:26 - SpikeEase
For copyright matters please contact us at: copymanager.mn@gmail.com Dance of the Pixies by Machinimasound licensed under Creative Commons Attribution 4.0 int’l / @incredible-qq2zi
I appreciate trying to make a ladder safer, but gutters are not strong. I don't care if the gutter gets damaged, I just mean that even though the ladder is clamped to a gutter, that doesn't mean the ladder is secure.
I came here to post similar.
Why wouldn't one just use vice grips. It's a stupid product
Was thinking the same. It's not just the weakness of the gutters either, but also the gutter spikes and the wood they're hammered into. Have seen gutter failures from ladders being tied off on them (and the accidents that resulted by the failures).
I also agree but I think it’s meant to stop your ladder from sliding from side to side but the gutter won’t protect you if thhe ladder falls back since it’s that weak
I was just saying that the load would only be what the gutter can hold not the ladder or the clamp. That's the weakest link.
On below posts, there has been some criticism on the ladder clamp. I own a construction company and had a ladder blow sideways in a strong wind. No one was hurt, but I did buy one of these items. It is not intended to keep people from shaking it hard back and forth as was depicted in the video. It keeps the ladder secured to the building in the case of strong winds, one leg settling/sinking into the ground a little, and it does help employees with the transition of going from roof to ladder.
Just some real world feed back.
I use it for my 40’ extension.
Thank you for that
I don't know if I'd be going up if the wind is strong enough to blow over an alum/fiber ladder. If an emergency, ok.
Op has obviously no gutter experience. The clamp is a safety hasard. No experienced constitution worker will lean a ladder against a roof. There's no point of damaging a gutter to get on a roof. No one in the gutter trade would support this device. There's a reason they make stand outs - stand offs. Only hacks would use this. A gutter is not designed to hold a person's weight. Period. Only inexperienced people would argue. I couldn't tell you how many spikes I've pulled out by hand. How many runs I've just yanked down removing the old. How many dents I've seen from people putting a ladder on a gutter, even when they think they're being smart putting something soft in between. Gutters are not made to support a person!!!!
@Squirrel Leader what the hell is a constitution worker, as a construction worker I've leaned a ladder against many gutters, after many years I've still never had a problem (probably because I do it right), so get off your self righteous high horse Karen
@wsf wsf when the work is scheduled, you do it... only excuse to avoid the job is lightning...
A clamp to prevent ladder falling over is a good product.
At the 9:00 mark, that drill driver set is pretty much the same as the Makita kit I bought 30 years ago.
At 6:16 you can get the board out of the trunk without any tools 😅😅
😂😂 really
Pretty cool combination using chainsaw and having a shaver in one tool very brilliant idea nice combo
You don't set ladders on the gutters!!
Attaching a ladder to a wobbly gutter, that really make sense... 😅
No
Problem with the gutter clamp is the gutter will not support that much weight in a fall. You just wind up dragging crap down on top of you.
It's not designed to SUPPORT a fall...It's designed to prevent the ladder from sliding side to side or pulling away and CAUSING a fall as your transitioning from the roof to the ladder.
I work in construction and I love these videos. Some of these items are kind of ridiculous, but a lot of them are very practical a few of them. I actually want to buy.
a chinese guy watching this channel... 1 week later, same stuff, cost 1/20 of the original price
As many agreed here, the gutter is probably weak. A secure connection to a weakness takes away from your reaction time. Just use a bungee, it gives time to react to side to side slip. For those that are using a product to keep the ladder from falling back while on it, the ladder was too short.
Sometimes when carrying materials of the ladder you don't want to have to move around the top of the ladder so it's better to have it fastened basically as you can just walk right up on the roof or up on the surface you're going to
But you're not wrong it should be four to five runs above the plane and standing at the bottom you should be able to stand with your feet at the bottom step reaching out with your arms straight in front of you and touch one of the rooms of the ladder level arms level I mean
Took a couple OSHA test?
Reciprocating saw? Ooooooooooohhhhh!! This is Jetson's Space Age stuff here.
Next up -- The Cordless Screwdriver.
Ladders shouldn’t be touching the gutters at all during access to avoid potential damage as guttering has very little load bearing strength. That’s why I carry stand off bars that attach to the ladder tops and support off brickwork etc…the only way to be sure is to fix an eyelet into mortar and rope your ladders in place.
Been painting 40 years and I can’t think of a possible use for the angled mini roller that I couldn’t do with a regular one.
Industrial steelwork touchups maybe. Cheap enough to throw in the kit. I have one that accepts a brush and it's saved a lot of time over the years.
The only difference is - you are not making money by selling the angled version.
What freaking genius came up with the idea to clamp the ladder to the gutter that is the stupidest thing I've ever seen.😮
Yes, they are as sturdy as tinfoil.
9:00 -- I have one of these that was made by DeWalt. I got it maybe 6 years ago. I used it when screening in my back porch, and I found it invaluable for speed and convenience. Drill the hole... counter-sink it... then drive the screw. That used to be three distinctly different steps, where it actually made sense to -- no joke -- buy three different drills, because otherwise you'd be swapping between bits on each screw.
At any rate, Kreg isn't the only manufacturer of this tool, and it isn't a new tool, either.
Have you not heard of countersinking screws?
Now you have an ER visit and have to replace a vinyl gutter held on with 10 wood screws.
You don't put ladders on rain gutters. (33 years of ladder experience)
No one uses ladder arms literally no one
This
A painters ladder stabalizer setting on the roof protects gutter and is very stable
I think Milwaukee makes every kind of tool imaginable for people who hate to work hard but need too work harder
The Debarker at 04:03 is just what I need for the wife's toenails.
The market has gone insane.$$$$$$$$$$$$$
great content: the problem with cool tools and inventions is the MSRP, nobody has a poor in mind. they all just want that money. that is why I and many others like knock-off companies.. the knock-offs may not be as good, and some better, but the thing is they are cheap enough for a poor to buy.
The gutter clamp is the dumbest idea. I had the gutter break on my 2 stories up and landed flat on my back on top of the ladder.
Thank you for switching to Metric but also keeping Imperial units on the video. I believe this helps cross referencing and hopefully ease the conversion to Metric one day.
Ladder gutter clamp is a sure fire way to break the seam seals especially the corner seals.
For the ladder we always use a bungy cord. Hook into the gutter, wrap around a rung hook on the gutter again.
These are some neat tools but awfully expensive.
That ladder lock 😂
Sure IT can withstand 100kg but that flimsy ass guttering ain't going to hold a feather 😂😂😂
I can see spike-ease being quite the tool for anyone wanting to derail trains. Hopefully they are not available to the public. Someone that motivated though would likely create their own version.
recipro saw is a must have fr
my fav use is for pruning trees and removing roots, it works sooo good for that
lol ladder tips over so does the gutters ..... nota good choice
Good video. I need a couple of these.
Don't trust a gutter. The header board maybe rotten and pull off.
The device may help stop the latter from sliding off sideways.
"Mini jumbo roller"😂
I have/use a similar debarker for making fence posts. I also know people with small mills who use them to save wear and tear on their blades.
I also have been using battery powered Sawzalls for about 30 years.
I used to have to climb on people's roof and my consideration to the home owner was to not scratch up and bend their gutters. Good idea here but I prefer ladder jacks spread wide on the actual roof.
That new fangled Sawzall? I better get one. I already have 3 different types in my collection?
The 4 inch roller is a mystery? My wrist does EXACTLY what this contraption does. Save a wrist and buy this thing.
The Kreg Quick-Flip looks like a tool to have.
The Fiber Optic strippa looks like a fine and useful tool. I would have one even though I don't need it. Be the first on my block principle!
Spike Ease is a back saver. I seen a machine that rode on the tracks and it could reach over, grab a tie and shove it under the tracks so precisely. I watched for about 10 minutes, pretty awesome.
0:41 Imagine Fred Dibnah looking at this guy 🤣🤣🤣
Love You Tube, there's countless great informational videos out there. This ain't one of 'em.
?? Here's an amazing reciprocating saw that runs on batteries and uses blades! What a breakthrough! Plus a double ended drill with countersink, like the one I used in the 80s! I guess we've just given up on the futurism and we're publishing anything that's submitted now . . . we're no longer pretending this is anything more than free advertising.
I enjoy looking at these videos but most of the items covered are not new or practical but you never know when the perfect idea could surface! Their railway spike remover got my interest today. I don’t know much about railway spike removal but this unit is driven by a cordless drill. Between spike removals I assume one has to reset it back to the start position which takes time and was not shown. I think the old fashion prybar approach would be as quick if not quicker and weigh about the same as this contraption and not need a power supply?
I would assume it has a spring driven release to return it to the "remove" position. Just an assumption though.
Trouble is: The gutter can't take the weight. And the prices of all this stuff is highway robbery.
I have those Kreg panel carriers and they are awesome! But I’m a big dude as in 6-4 and 255. If you’re a shorter guy I don’t know if they’d be as useful because you’re trying to press the weight where as for my I can just shoulder it.
Is it ok for sheetrock or will it crush it?
@@ruffxm Use them for sheetrock all the time.
@@NASTXL thanks
*machines are amazing*
NOBODY who works with tools would use a SAW to remove those nails. They would use a claw hammer and just pull them out. There are circumstances in which one would cut nails with a saw, but not in the one shown.
When we were hanging drywall in areas after demo, we would cut any excess of nails sticking out. Time is money and nobody has the time to pull each nail out, so we cut them off.
A 2-hour quick charge, is not a quick charge.
I love how this channel always cheers me up no matter what. Kudos!
Cheers you up with tools you'll likely never need?
Great vid, keep it up guys!
Love the ladder lock device, the guy installs and removes it AT THE ROOF!!
Obviously no gutter experience....☝️
The debarker would be useful on folks who abuse children
TAKE THIS POST DOWN PSYCHOPATH SHARING IDEAS.
@@CynthiaWord-iq7in why are you so offended? Do you abuse children or something? You are sick.
The Hilti product is meant to stop fire and smoke spread through firewalls, not really for climate control. Those tubes seal when it gets hot in a fire, and prevent fire from traveling through for several hours
Korea hypothetically got the bid
The painting roller looked like you couldn’t get any pressure
Did the guy on the ladder really tie homself off to the top of the ladder? Osha has become absurd!
2:12 ... Imagine if it could put temporary holes in the wall that go away as soon as you remove it (like in magic tricks and cartoons). That would be one of the most useful devices ever invented. I'm certain it's possible, but I doubt we'll see it in the next 20 years. You never know with science though. Many inventions were once thought to be impossible (if not most modern inventions, like TV, computers, music/video players and electricity altogether... and cars, airplanes and possibly even glass at one point in time.
So didn't think about gutter guards on top of gutters to keep leaves and debris out now did they. Mine are covered.
Gutters are never safe i cleaned windows & gutters for years .
That debarker looks dangerous.
I had to laugh at the gutter clamps. Do you think I’m going to put my faith and life on those things? Ha! You’d be better off tying a string around the ladder. It’s the same concept.
instead of the gutter clamp get a few helium balloons as they are more dependable 😁 The clamp should grab the eve of the roof and the roof it self at the truss below and SCREWED IN
he's not using three points of contact on the ladder lol
I’m going out and buy that spike puller right away??………oh, wait, I don’t have a rail road yet!
I’ve been looking for a good spike removal tool!
How much weight does a gutter hold not a hundred pounds lol.
I like them all
Ez-path over Hilti sleeves. The opening of Hilti sleeves and not closing them means the fire protection is missing and easy to forget. In applications like hospitals they will get checked by joint commission and heavy fines occur if they are left open. There is no closing an ez-path it just works.
EXCELLENT! Thank You!🤠
What I want to know is where they get the extra I they use in aluminum 😆
Railway “spikes” are so 19th Century. Pandrol clips are the future
10:29 Well that comes a little late, those spikes have been replaced with screws ages ago!
?
Hmm... all the tracks I see still use spikes, but even if correct, the tool should speed up the switch to spikes.
Now... I dont know who watching this video would need a railroad spike removal tool...
@@whochecksthis Well it's time to "update" those tracks because I cannot find a single spike on railroad tracks here (even those old abandoned tracks here have screws instead of spikes)
Wow. This did not go as I expected
Do NOT mean a ladder against a gutter! Professionals will lean it with extenders against the side of the building. It would damage & break the gutters which could cause the ladder & person to fall & could cause death!
Also who's not using ladder arms to avoid crushing the gutters
This
Brick tongs 3:07 have been around since 1925 (at least that's when they were patented). 98 years later, they're not exactly a novel idea. They're hardly what I'd call a "cool tool". Yes, they're useful... for their intended purpose. But they're only a "must buy" tool if you're actually a brick layer.
Same goes for most of these tools. They're only useful if you're in a very specific line of work. And if you are in such a specific line of work, you're almost certainly not watching youtube videos to find out what tools you should be using.
*BEST COMMENT ON THIS THREAD*
Wow I never seen a sawzall before holy cow
Some of these items are useful but the prices on a gamble or questionable product is crazy
Do you think they took over every single chiropractor's office in america
Maravilloso
Would be nice to know where we could buy some of this stuff
I just put the name in that they showed on this video & a lot are on Amazon & not too bad for pricing. I got that Kreg Panel carrier for $24.
Worth buying really 😂
❤ i like ...verry good
A bucket hook on the roller is outright moronic. What "guineas" came up with that? One that never painted before except with an easel.
0:44 what about gutter guards that keep debris from the gutters 🤔🤦🏼
Love the de-barker
very expressive keep it
👍👍👍👍👍👍
Did that man just countersunk a lenshead screw instead of countersunk screws?
so not only do you fall , you also rip the gutters off the house
What do you think people do for a living that these "are really worth buying"? I have a panel carrier and a saws-all, because I'm a normal human being, but I guess the next time I need to un-spike some rail road ties...
removes the ladder guard and loses balance lol
And this would work how if gutter guards are installed?
Videos like this are made by people that don't
use tools for a living
Dude was crooked @8:59 and I'm certain the screw showed it @9:02 ;)
What kind of fools do they take us for Gutter may kill you when they fall on top of you once the clamps pull them down !
American code prevent using strippers by twisting them around a wire. It leave a groove & weakens it & is a FAIL point!
A billion tools every year is over
Yeah for $4500 you know how many crowbars I could buy.
So much random stuff we gotta deal with
SUPER
7:33 why would you get that instead of DeWalt? Every time you buy a cordless set up you are investing in the battery systems. I’ve never heard of work pro. But I would only get a work pro saws. All if I had work pro power tools, you know what I mean? If you already have DeWalt tools and batteries and charger you can just get the cheapest saws all that does everything this does for around $100 or the really good one for around 200.
The tittle should say 12 tools that are worthless