@@comfortablynumb9342 Because every guys builds their own. Its part of the trade. Shows that you know what youre doing. Pretty obvious that someone who can bend bar can make a tool to their preference, just as a carpenter does with spacing tools and jigs.
@@comfortablynumb9342 also, as shown not even the most complicated build so why buy when you have enough rebar leftovers to make your own or in the most dire of needs make a throw away one from wood.
@@glenncoody Any welder worth his salt who can make a pickle fork will obviously go to a glass blower to have the appropriately sized jar made. And then to a metal fabricator to make the lid and a submarine door manufacturer for the rubber seal.
He made a Bendix. I once made a lathe out of an old record player motor and used that to make small chess pieces for a small chess board I made in middle school. A bendix is indeed used all around the world. Among its uses are pipe-bending and for tying fencing to posts and many other things.
It's a Great Idea for Small Rebar because Every size Has to Rolled on a Bigger Roller or the Rebar is Crystallized!!! Worked as a Rodbuster in 15 States over 27 Years building Nuclear, Coal & Hydro with Dywidag Rebar coming from East Germany in 1979!!!
Как говорил один известный человек:"вся суть лайфхака не только в том, чтобы выкинуть из своего воспалённого мозга какой-то очередной выкидыш, и не только чтобы этот выкидыш хоть как-то работал, но и в том, чтобы оправдалось затраченное на него время"...
5 of my brothers are ticketed welders, tool and die makers and C and C operators, making tools, gigs, dies etc, it is second nature for welders to do this naturally.
Можно это сделать всё гораздо проще! Берëшь пруток сантиметров 40 и две гайки. Одну варишь в торец, а другую с другого конца в нахлëст. И вуаля, ключ для загиба хомутов готов. Это тоже достойный вариант, но много заморочи в изготовлении😊
@@hardball_man первую гайку варите в торец прутка, чтобы отверстие гайки смотрело перпендикулярно прутка. Вторую гайку варите с другого конца но уже на тело прутка, так чтобы отверстие гайки смотрело вдоль прутка. И получается ключ для загиба хомутов с разных концов под разные задачи
I’d change the design a little bit. Eliminate the u-shape piece replacing it with a straight piece across then weld another straight piece across at the top of the bend in the u-shape then weld the long hand on the backside that eliminates cutting the tac weld pieces at the top. In doing it this way eliminates all this second operation work and you don’t have to waste time lining up the piece of rebar you want to bend on either side , just slap it in and bend your done.
Wait. He's only using the rebar on the sides to make the bends. It limits what size rebat he can actually bend. Just weld a piece of rebar to connect those two pieces. Then you have something you can use more sizes.
Fachgerechtes Schweìßen und Trennschleifen bei einer Erfindung von mobilen Handarbeitsgeräten für Befestigung von Stahlgerüsten😊.Das ist eine wirklich tolle Sache😊.Dieser Erfinder sollte das erfundene Gerät in Serie herstellen sodaß alle Baubetriebe in der Welt davon profitieren kõnnen😊.Für die Zukunft ist das eine absolut geniale Idee für alle Leute in der Welt die eine Schweißer-Ausbildung abgeschlossen und einen Schweißerpass haben😊.Supertoll diese mobile Handhilfe😊.Für die Arbeit draußen auf dem Bau absolut zu empfehlen😊.Spitze😊.
In Asien z.B.(das wird auch auf Telefunken-Flachbildschirme mit Androidsystem die TH-cam in Fernseh-Großformat präsentieren)werden alt-verlassene Garten-Spezial-Traktoren gesucht die dann durch junge Leute wie neu restauriert werden.Solche Restaurationen bekommen nach einer 100%igen Reinigung einen neuen Farbanstrich und sehen dann richtig schick und neu aus,als wenn die Geräte,Traktotren oder Motoren eben erst frisch im Laden gekauft wurden😊.Hinterher nach der gesamten Restauration mit kompletten Zusammenbau funktionieren diese moderniserten Gegenstände im TH-cam-Kanal dann mehr als 100%ig und sind dann sofort mehr als gebrauchsfertig für die weitere Zukunft zu verwenden.Das ist echt supertoll wenn man die Leute in Asien auf dem TH-cam-Kanal zuschaut,wie sie aus verschrotteten Motoren z.B. wieder in ganz neuen Farbglanz erstrahlen lassen möchten😊..Einfach schön😊.
@Z4mUs that item has been available commercially for a while so he does NOT have the patent for it. Quit believing everything you see in the internet as a new invention.
@@Lonewolf0161 He even made one out of GOLD mate. He had to prove he is the INCARNATION of his invention at a welding competition I tell yeww. Where ya been all yer life? Crawl out of yer grandma's ubbers already mate.
@Lonewolf0161 I just invented a new thing that you hold in your hand and can watch people argue about stuff they don't actually know anything about... I call it fahone 😏 🤣
@@flashgett9178 Приветствую!!! Такой способ можно реализовать, если, к примеру, сделать подходящих размеров матрицу и потом уже из готовых рамок/хомутов собирать каркас!!! В случае сбора каркаса, как это делается в ролике, через несколько хомутов ширина и высота самого каркаса начнёт уменьшаться...
@@flashgett9178 Сам строю себе дом в чистом поле и чуть-чуть знаком с этим процессом... Я себе сделал специально станок, есть фоты, но в комментариях нет возможности их выложить на публику, к сожалению...
@@user-mu7tm1ow9y скажи мне, что в данном случае, эта прихватка была необходима и без неё ничего не получилось бы. Металл бы увело настолько, что бы ...что? Арматура не сгибалась бы?
@@sanyaigorevichкапнуть 3-5 прихваток это не труд,зато крепкая конструкция.как чувак работает мне нравится,и его ролики.тоже.80% критиков такой подгонки и аккуратности не сделают!,а кому нужны эти причиндалы это совсем другая история.
@@The_Synator Yes, because a consumer display does not emit the UV- and IR-rays that damage your eyes during welding. Do you also put shades on, when you're watching videos that show the sun? LOL.
@joeschmoe3815 did I say damage your eyes? No, I said blinded by it. I've been around a lot of welding and if you aren't getting blinded by the light from the video, you are lucky, but I know damn well, others I've shown this too have agreed that was too damn bright. Have fun kid.
Yeah, just in case you didn't know, fabricating something that has been around and in use for decades, is not an invention. That said, looks like he did a fine job of building it, and I'm all for building stuff yourself instead of buying one ready made, if you have the time and tools and materials to build it cheaper and/or better than a store bought one.
Rebar is so versatile. We would temper the ends and make heavy duty center punches out of them in the plants when I was Ironworking. No we didn’t temper the whole thing. I know there would be one person say if you did it would shatter. Gotcha. 😜
Don’t get me wrong, it’s neat that he made that. I have four of these that I bought in the store years ago.
Why do you have 4?
@@bbq878the man obviously has a lot of shit to bend 😂 homie has a job working
@@jackgreenstalk777 Common 4?? Leave some bending for the rest of us.
😂😂
Please insert girder.
Dude,I have this tool from my grandpa s dad.Forge welded. From the 1910s.....
I can't imagine that that thing breaks down because it will never...
Every rebar guy I ever hired had all those tools made by hand ready to go.
😮😮
Why can't you buy the tools?
@@comfortablynumb9342 Because every guys builds their own. Its part of the trade. Shows that you know what youre doing. Pretty obvious that someone who can bend bar can make a tool to their preference, just as a carpenter does with spacing tools and jigs.
@@comfortablynumb9342 also, as shown not even the most complicated build so why buy when you have enough rebar leftovers to make your own or in the most dire of needs make a throw away one from wood.
Yup, we have those on every site and column yard, it's called a pickle folk
Thank you for a video without music ❤🎉
YES! Love to hear just the sound of the tools.
I can't imagine how I managed to get this far in life without one... Oh, that's right I have had and used one for the last 40 years... Good invention.
What's the name of this tool?
Загибалка! @@mihir1700
@@mihir1700 One commenter called it a "pickle fork". I don't see how you can get it into a jar of pickles though....😂
@@glenncoody Any welder worth his salt who can make a pickle fork will obviously go to a glass blower to have the appropriately sized jar made. And then to a metal fabricator to make the lid and a submarine door manufacturer for the rubber seal.
Hands?
I can't think of a single reason why I would need something like that.
I wasn't wearing my protective eye gear when watching this video.
I am not sure if you are able to read this comment now... sorry brother, for your loss
Actually yes they should take care of the viewer😮
可以拿一張白紙塗黑，黑色地方鑽二個小點，這樣之下就可以保護臉部不讓灼傷
Violated safety regulations😂
😢
You could use that to bend wire
A small 1/2 inch pipe will do the job.
I was gonna comment the exact same thing.
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 AA😊😊
9@@efraincastilloruales1628🎉
But the work of the tube remains incomplete
Nowhere near as easy-fast or as tight and tidy as this tool
He made a Bendix. I once made a lathe out of an old record player motor and used that to make small chess pieces for a small chess board I made in middle school.
A bendix is indeed used all around the world. Among its uses are pipe-bending and for tying fencing to posts and many other things.
Забываете о правилах безопасности, надо перед сваркой кричать "Глаза"! 😅😅😅😅
😊
Es muß mehr erfunden werden,sodaß die Arbeit wo auch immer mehr Spaß macht😊.
That is awesome, however I was a rod buster for 22 years and we made them all the time for this purpose.
Enjoy
couldn’t just leave it at “that is awesome” could ya’ 😂
Draggty@@josewales892
Hicky bar
I worked for steel reinforcement fabrication co in UK for 10 years,
.
It's a Great Idea for Small Rebar because Every size Has to Rolled on a Bigger Roller or the Rebar is Crystallized!!! Worked as a Rodbuster in 15 States over 27 Years building Nuclear, Coal & Hydro with Dywidag Rebar coming from East Germany in 1979!!!
Can we start a go fund me page so we can send this guy to welding school and maybe possibly buy him some welding gloves
I thought he was making a homemade weapon at first 😂
It definitely would work as a weapon
Как говорил один известный человек:"вся суть лайфхака не только в том, чтобы выкинуть из своего воспалённого мозга какой-то очередной выкидыш, и не только чтобы этот выкидыш хоть как-то работал, но и в том, чтобы оправдалось затраченное на него время"...
😊😊😊😊😊zzp😊p😊😊
5@@abnermanio1454KO ini
Крутяк
Доктор Дью
Si viva ukrania
A nifty back scratcher, just what the world needs!
Rebar tool made from rebar? Genius!
You should've told me I have to wear glasses while watching this video.
🕶️
I didn't know we needed them lol! When viewing a video footage
Didn't know we needed them when viewing a video footage lol !!!
Lots of heavy flashes and such can cause seizures.
Same with videos the reason most have a warning.
@@boundforglorywtI had seizures this isn't gonna do anything
Where’s all my first year apprentice chiming in to say the weld is shit and it won’t pass x-ray? come on, i know you want to….
😂
Real
The weld is shit bro, it won't pass x-ray...😮
@@richardlincoln8438 there it is
Ze veld is gud
5 of my brothers are ticketed welders, tool and die makers and C and C operators, making tools, gigs, dies etc, it is second nature for welders to do this naturally.
I work at a welding shop that everything has to be done by blue prints.. That's why they call it Precision Steel.
Можно это сделать всё гораздо проще! Берëшь пруток сантиметров 40 и две гайки. Одну варишь в торец, а другую с другого конца в нахлëст. И вуаля, ключ для загиба хомутов готов. Это тоже достойный вариант, но много заморочи в изготовлении😊
???
@@josecl41 ???
???ЯННП, но прошу подробности. На неделе как раз буду заливать опалубку под теплицу.
@@hardball_man первую гайку варите в торец прутка, чтобы отверстие гайки смотрело перпендикулярно прутка. Вторую гайку варите с другого конца но уже на тело прутка, так чтобы отверстие гайки смотрело вдоль прутка. И получается ключ для загиба хомутов с разных концов под разные задачи
@@hardball_man this man tryna grow Mary Jane
Yes. And it's called "welded rebar slingshot" 😎👍🏼🤙🏼
Нижнее. у неё 4😊88э😢з😢😢😢😢😊😊😊😮🤷🙊🚯🙂🙅👎😤😤😤🤦♂️😢🎉хэ фу 3😊😊8х💕💕💕
8😊ээ😊😊😅😊
And back scratcher
That would be awesome honestly
Chuck Norris back scratcher😂
It's no small wonder, that I have any eyesight remaining. These people keep welding without providing me welding lenses.😂
I like how he was able to adjust it after the first weld...
I mean yeah it's called a tac weld for a reason.
@@RC_Trailblazers yes and tac welds are supposed to HOLD them together 🤦♂️
Genius. Often the need for a specific tool results in its creation. Well done 👍👍
That's probably why it was invented over 100 years ago.
My dad made a recliner out of rebar. I didn't tell everyone that he invented the chair.
At first, I thought he was making an industrial strength back scratcher 😮
Cow Bar😢
Dude that tool was done years ago in Mexico! They improvise as do the Cubans with their mechanical work on vehicles
Instead of cutting the extra piece, begining itself exact measurement rod can be used
😂😂😂😂😂😂 so you finally found a flaw in his work 😂😂😂😂
It would be harder to bend...
Nota 10 irmão, o mundo precisa de pessoas do seu gabarito!!!!!!!!❤❤❤
I’d change the design a little bit. Eliminate the u-shape piece replacing it with a straight piece across then weld another straight piece across at the top of the bend in the u-shape then weld the long hand on the backside that eliminates cutting the tac weld pieces at the top. In doing it this way eliminates all this second operation work and you don’t have to waste time lining up the piece of rebar you want to bend on either side , just slap it in and bend your done.
Already patented, "Sorry Charlie!"
Только вот на чем согнуть первоначальные куски арматуры !?
руками)
W zębach 😂
Обычно зубами это сварщики делают,докуривая бычок четверки...🤣
😂😂😂 не говори
А вот эта задача для зрителя😂
За 25 лет сварки столько зайчиков не поймал, как с этого видео 😢
Тоже нахватался кажется)
А мне еще окалина от болгарки прилетела
Larga vida ukrania espasiba
Когда смотрел ролик маску слабо было надеть?
@@prizrak5002бухани грамм 200 на каждый глаз и будет тебе счастье.
To be fair, he never claimed the guy invented it recently. 🤣
Wait. He's only using the rebar on the sides to make the bends. It limits what size rebat he can actually bend. Just weld a piece of rebar to connect those two pieces. Then you have something you can use more sizes.
It would limit the angle of bend on the finishing bend.. look again.
Хорошая приспособление, но из трубы сделать проще👍
👍👍👍
Fachgerechtes Schweìßen und Trennschleifen bei einer Erfindung von mobilen Handarbeitsgeräten für Befestigung von Stahlgerüsten😊.Das ist eine wirklich tolle Sache😊.Dieser Erfinder sollte das erfundene Gerät in Serie herstellen sodaß alle Baubetriebe in der Welt davon profitieren kõnnen😊.Für die Zukunft ist das eine absolut geniale Idee für alle Leute in der Welt die eine Schweißer-Ausbildung abgeschlossen und einen Schweißerpass haben😊.Supertoll diese mobile Handhilfe😊.Für die Arbeit draußen auf dem Bau absolut zu empfehlen😊.Spitze😊.
diese Dinger gibt es seit mehr als 20 Jahren und es gibt einige Hersteller die diese in Produktion haben und am Markt anbieten, Das ist nix neues.
In Asien z.B.(das wird auch auf Telefunken-Flachbildschirme mit Androidsystem die TH-cam in Fernseh-Großformat präsentieren)werden alt-verlassene Garten-Spezial-Traktoren gesucht die dann durch junge Leute wie neu restauriert werden.Solche Restaurationen bekommen nach einer 100%igen Reinigung einen neuen Farbanstrich und sehen dann richtig schick und neu aus,als wenn die Geräte,Traktotren oder Motoren eben erst frisch im Laden gekauft wurden😊.Hinterher nach der gesamten Restauration mit kompletten Zusammenbau funktionieren diese moderniserten Gegenstände im TH-cam-Kanal dann mehr als 100%ig und sind dann sofort mehr als gebrauchsfertig für die weitere Zukunft zu verwenden.Das ist echt supertoll wenn man die Leute in Asien auf dem TH-cam-Kanal zuschaut,wie sie aus verschrotteten Motoren z.B. wieder in ganz neuen Farbglanz erstrahlen lassen möchten😊..Einfach schön😊.
Still waiting for the thing he invented, the thing in video has been around for years, though not typically made from the softest steel you can find
He's the first one to hold a PATENT of the thing. What do ya do fer a livin? Browse Facebook? Come out here and start building your own contraptions.
@Z4mUs that item has been available commercially for a while so he does NOT have the patent for it.
Quit believing everything you see in the internet as a new invention.
@@Lonewolf0161 He even made one out of GOLD mate. He had to prove he is the INCARNATION of his invention at a welding competition I tell yeww. Where ya been all yer life? Crawl out of yer grandma's ubbers already mate.
@Lonewolf0161 I just invented a new thing that you hold in your hand and can watch people argue about stuff they don't actually know anything about... I call it fahone 😏 🤣
@@user-ro1gn8tb9y I hold the patent to that Fahone ya thief! Where is the receipt? Me hold da patent me tell yaaa
El ser humano es un creador y recreador, en cada instante de su vida. Te felicito amigo
😊
👍🔥😱💯 mantap 💯
I thought he was remaking Aquaman’s staff
Some people deserve every penny they get!!! 😎
Приветствую!!!
Так собирать каркас не очень правильно, так как рабочая арматура потеряет параллельность...
Русские смотрят по крайней мере профессионально на такие изыскания в плане армирования . Почитал верхние отзывы , ЭТО ПИПЕЦ !
Hi, what do you mean: "потеряет параллельность"?
@@flashgett9178 Приветствую!!!
Такой способ можно реализовать, если, к примеру, сделать подходящих размеров матрицу и потом уже из готовых рамок/хомутов собирать каркас!!! В случае сбора каркаса, как это делается в ролике, через несколько хомутов ширина и высота самого каркаса начнёт уменьшаться...
Hello. There is logic in your words. Thank you.
@@flashgett9178 Сам строю себе дом в чистом поле и чуть-чуть знаком с этим процессом... Я себе сделал специально станок, есть фоты, но в комментариях нет возможности их выложить на публику, к сожалению...
Сварить нижние концы, что бы потом отрезать их болгаркой. Гениально!
это полная хуняя
Тоже, об этом подумала.
Есть такое понятие что металл ведёт, поэтому и прихватывают!
@@user-mu7tm1ow9y скажи мне, что в данном случае, эта прихватка была необходима и без неё ничего не получилось бы. Металл бы увело настолько, что бы ...что? Арматура не сгибалась бы?
@@sanyaigorevichкапнуть 3-5 прихваток это не труд,зато крепкая конструкция.как чувак работает мне нравится,и его ролики.тоже.80% критиков такой подгонки и аккуратности не сделают!,а кому нужны эти причиндалы это совсем другая история.
Never seen a back scratcher do that before
I like all your working find them to very interesting and it grabs my attention great job.
Took too many extra steps to make this. Next time, warn viewers also from blinding light from welding.
😮😮
LOL. Can't be blinded by watching it on your monitor or tablet.
@@joeschmoe3815 wanna bet??
@@The_Synator Yes, because a consumer display does not emit the UV- and IR-rays that damage your eyes during welding.
Do you also put shades on, when you're watching videos that show the sun? LOL.
@joeschmoe3815 did I say damage your eyes? No, I said blinded by it. I've been around a lot of welding and if you aren't getting blinded by the light from the video, you are lucky, but I know damn well, others I've shown this too have agreed that was too damn bright. Have fun kid.
thank you bro for sharing.congratulations
About time somebody thought of that.
so i wonder how high of a resolution i will have to have to need a face shield to protect my eyes from a video of arc wielding.
That Tool will Changes Lives
👍🏻
Oh wow this is acually pretty geenus
A "Welders Goggles needed" warning would have been helpful....'BLINK'....thanx.
Man of Genius reproduces antique wire bending apparatus 🎉Amazing 🎉
Very nice,and creative
This is a bad quality welding job.
Yeah, just in case you didn't know, fabricating something that has been around and in use for decades, is not an invention. That said, looks like he did a fine job of building it, and I'm all for building stuff yourself instead of buying one ready made, if you have the time and tools and materials to build it cheaper and/or better than a store bought one.
This video gave me welders flash 😵💫
I shouldn't have watched this. Now my eyes are burning from the UV.
Rebar is so versatile. We would temper the ends and make heavy duty center punches out of them in the plants when I was Ironworking.
No we didn’t temper the whole thing. I know there would be one person say if you did it would shatter.
Gotcha. 😜
NO BLUEPRINT, OUT OF THE MINDS EYE! BRILLIANT!!!😊
que Bonita herramienta, y util. 👍
He's changing the world
At first I thought it was a boot remover. Great job
Construction workers in Mexico have been using these forever
I just buy my tool at full price at the store and spend my day building stuff instead of taking an hour or two to make a tool first.
Easy guys in the comment section. This guy is clearly new and proud of what he thinks he came up with.
Se llaman "Grifas" y en México las usamos desde hace 80 años
Always check spacing of main rebars , it can be reduced or compromised.
This is why real men have Popeye's forearms. Pair of pliers and grit, to bend shit.
"New invention that is sure to be useful all over the world" You mean existing invention already used around the world?
There was a previous video of the tool. His was made with a plate and most likely the original version
Magnifico trabajo! 😎🇲🇽🇲🇽🇲🇽
스스로 장비 기구를 만들어서 사용하는거 정말로 좋아요 ~ 😂
역시 인간은 도구를 써야 인간이지.
Y tú qué eres robot o alienígena con tus letras $#@&-'"*:;!()/&_!?'""% *-+/*🖕🏿🦧🖕🏿👈
Está fino 😊, pero por favor incluye cada medida para cortar ideal y me quede como ese original. ❤
Esse cara é um gênio 👏👏👏👏👏
a lot of people made personal tools over the years, that they never got a patent for, that could had made them very rich
Parabéns parceiro
Ótima ferramenta simples mas muito eficaz
Ahh yes the "new invention" that is found at every concrete pour and precasting plant.
I need one and I’m making one thank you💪🏽👍🏼
Хорошая штука, я сначала думал чтобы спинку чесать.
When you need a way to bend metal or smash or bend body parts.
This is not correct with the standard, the bending ligs or straps for R10 BAR should be 3D. That means it should be bent around 30 mm pin.
one problem. if there is a dent at any part on the bigger rod , its a problem
ពិតជាមានគំនិតច្នៃប្រឌិតខ្ពស់មែន! សូមសរសើរ!
If there is small horizontal rod to suport, it will be further easier
Should’ve edited the bright sparks out!!
Бро, ты зачем шлак оббивал? Он бы и так осыпался. Береги себя!
Шлак тоже детали дополнительно держал бы .
Welding ankho me lag gaya😂
Перевод металла. Можно было всё сразу расчитать чтобы потом не обрезать.
Uh. Ive had 2 cement men who wanted me to fabricate these 20 years ago. They saw me practicing my welding as a kid and asked me.
My eyes hurt from watching the light of the welding.
I’m glad I don’t weld so I’m not compelled to make one.
По привычке закрыл глаза, наверное видео интересное😂😂😂