hi very clear instruction thanks for your guide people my question is i use analog phone with analog telephone adapter the model HT701 (10 nos) this 10 nos also seen on the web browser witch ip add i set. how to add extension this 10 nos how to make register ht701 register network?
Thank you for your video, very helpful. I have a question is it normal if my system is running off the FXO port analog trunk (for service) to take about 12 seconds until I hear a ring tone for and outgoing call? Maybe VOIP trunk is faster at communicating?
Hi there! Great video!, I have one question, how did you manage to configure the SIP extensions to connect to ports 5060? as seen on the -Basic/Call Routes Extensions section.
hey, how many extensions can we make on this PBX? Also, have you used the GS Wave app? If you have then I wanted to ask, what if I go out of my wi-fi network range, how will the smartphone then receive the internal extension call? Can it be programmed that when I will be out if network, it can forward the call via my FXS? Thanks a lot!
Thank you for the video I have a Grandstream UCM6100 I have benn configured my SIP trunk but in status screen my trunk appears in nos monitoring status, There is something wrong in my configuration? Thanks for your help.
Hi , thank you for this nice and useful pesentation.I ave no probleme when dialing regular phone numbers ( 10 digits ) but there is an issue with my UCM, i can not call mobile phone numbers, although i have specified the dialing type. Any solution to solve is probleme ? Thanks for your answer.
Just to clarify, are SIP channels the same as analog phone lines? For example, I have 10 stores with each having their own analog phone number. We are going to start porting them over to SIP and run through our main office (UCM6108). With Lucid phone I could port all 10 lines over and pay $45 a month for 10 locations?
how do we upgrade to the newest firmware? the ucm is telling me to downgrade to some other firmware (which I can't find) then upgrade to the latest firmware. The instructions link to a page that is not there anymore, I get a 404 error. I am afraid to play with the firmware if I have to downgrade and then upgrade and if I make a mistake the thing won't work anymore. And on top of that I don't understand why I have to practice black magic to upgrade firmware. Every other device in the last 10 years you find the new firmware, upload it to the device and you're done.
hello, I followed your configuration method, I receive incoming calls but when I want to make an outgoing call to a gsm line the phone gives me a voice message that the number can not be available, thank you for explaining to me how to do cordially
i have two ucm 6104 in two branches, i tried to connect them on vpn, both devices can ping together, but sip turnks can, nt recognise each other, any one knows how to establish the connectivity... i will be greatfull for guidence...
with UCM6104 , How we create Inbound and Outbound Rules for PSTN ? ie receiving calls and outgoing call through PSTN ( Not using any sip trunks at the moment, Just using local PSTN lines for incoming and out going calls )
LucidPhone hi, one more doubt , we can transfer calls from DP710 to 715 and vice versa ? or first floor 710 to second floor 710 both connected through deferent 715 ?
9 ปีที่แล้ว
I have problems, i have the main number and a DID, each number is for one company and i need to divide the calls. But all calls enter in the same route. I have done everything and don't get how to make two inbound route for both numbers. I have a voip trunk in the dominican republic.
Leonardo Forero si la puedes configurar pero los tecnicos te cobran entre 420.000pesos y 600.000 pesos es mejor que montes un servidor elastix en un computador con dos tarjetas de red desde un pentiun 4 con 1gb de ram te funciona perfecto y te tardas solo 1 hora configurandolo fuera de la instalacion de elastix
Hi, Thanks for your video, I want to use two UCM6102 as a pair which is I drew in the link below, Can I use this device for such a configuration? thanks imgur.com/a/JutAoZt
Thanks for a great and simple to follow video, had my UCM up and running VERY quickly.
Exactly the information I needed, Thanks a lot Mister Masad
It is great and simple .. Thanks a lot
Very good video.
hi very clear instruction thanks for your guide people
my question is i use analog phone with analog telephone adapter the model HT701 (10 nos)
this 10 nos also seen on the web browser witch ip add i set. how to add extension
this 10 nos how to make register ht701 register network?
Thank you for your video, very helpful. I have a question is it normal if my system is running off the FXO port analog trunk (for service) to take about 12 seconds until I hear a ring tone for and outgoing call? Maybe VOIP trunk is faster at communicating?
Hi there! Great video!, I have one question, how did you manage to configure the SIP extensions to connect to ports 5060? as seen on the -Basic/Call Routes Extensions section.
a little fast but i found it very good.
hey, how many extensions can we make on this PBX? Also, have you used the GS Wave app? If you have then I wanted to ask, what if I go out of my wi-fi network range, how will the smartphone then receive the internal extension call? Can it be programmed that when I will be out if network, it can forward the call via my FXS? Thanks a lot!
Thank you for the video
I have a Grandstream UCM6100 I have benn configured my SIP trunk but in status screen my trunk appears in nos monitoring status, There is something wrong in my configuration?
Thanks for your help.
Great video, can you do another explaining sip trunk setup with external 3G/4G softphones
Will do, thanks!
Am using a UCM6510, I want to link it to Panasonic PABX, How do I go about this
could you please help me with my UCM6102 NOT booting at all how i can fix this issue
Hi , thank you for this nice and useful pesentation.I ave no probleme when dialing regular phone numbers ( 10 digits ) but there is an issue with my UCM, i can not call mobile phone numbers, although i have specified the dialing type.
Any solution to solve is probleme ?
Thanks for your answer.
Just to clarify, are SIP channels the same as analog phone lines? For example, I have 10 stores with each having their own analog phone number. We are going to start porting them over to SIP and run through our main office (UCM6108). With Lucid phone I could port all 10 lines over and pay $45 a month for 10 locations?
Correct. As long as your locations can access the internet and connect to the PBX at the main location.
Quisiera saber si se le puede configurar un portero electrico, si se puede modelo y pasos para configurarlo
Hi
Can you tell me how to setup call back extension to extension in case analog
video calls is not working with me, is it Off by default ?
how do we upgrade to the newest firmware? the ucm is telling me to downgrade to some other firmware (which I can't find) then upgrade to the latest firmware. The instructions link to a page that is not there anymore, I get a 404 error. I am afraid to play with the firmware if I have to downgrade and then upgrade and if I make a mistake the thing won't work anymore. And on top of that I don't understand why I have to practice black magic to upgrade firmware. Every other device in the last 10 years you find the new firmware, upload it to the device and you're done.
Hello. How can i extract all informations of extensions in excell format from the plateform????
hello, I followed your configuration method, I receive incoming calls but when I want to make an outgoing call to a gsm line the phone gives me a voice message that the number can not be available,
thank you for explaining to me how to do
cordially
PLEASE can you tell if i want GS wave in my local network configuration so how can i do.
hola necesito que tenga una diferencia entre el sonido de llamada entrante externa a una interna.. algien sabe??
Hi Where I can find provider? Are you providing the VOIP? Thanks
una pregunta saben por que no puedo ingresar al pbx con la ip ya tenia acceso pero de la nada dejo de funcionar y se callo toda la telefonia ayuda!!!!
I use UCM604 , I can't find my phone model in zero config , please can you tell me why and how to fix it ,thanks
add cho xin phần mềm cài đặt của tổng đài ip grandstream ucm6104 cho em xin đi. em đang cần gấp để làm đồ án tốt nghiệp. cám ơn add
i have two ucm 6104 in two branches, i tried to connect them on vpn, both devices can ping together, but sip turnks can, nt recognise each other, any one knows how to establish the connectivity... i will be greatfull for guidence...
with UCM6104 , How we create Inbound and Outbound Rules for PSTN ? ie receiving calls and outgoing call through PSTN ( Not using any sip trunks at the moment, Just using local PSTN lines for incoming and out going calls )
You need to add an Analog trunk and assign it to an inbound / outbound rule same as the VoIP trunk.
LucidPhone hi, one more doubt , we can transfer calls from DP710 to 715 and vice versa ? or first floor 710 to second floor 710 both connected through deferent 715 ?
I have problems, i have the main number and a DID, each number is for one company and i need to divide the calls. But all calls enter in the same route. I have done everything and don't get how to make two inbound route for both numbers. I have a voip trunk in the dominican republic.
The trick is to copy the pattern of each DID in all inbound routes.
LucidPhone I did it this way: _8096886092(this is a DID)
_8096821645(this the main number). and all calls enter in the main number.
can unifi UVP-PRO can register to ucm6100
Alguien de México que pueda darme una mano para configurar una central UCM6104
HOW DO Y MAKE ALL THE PHONE RING AT SAME TIME
Darlington Nkwopara make a ring group and add all extantions to that group and then go to your inbound then select ring group in default section.
Hello.
Grandstream ucm6104 show caller id "undetected 0000"
6208 o 6100, diferents
hola este modele acepta líneas externas zip?
si
no es compatible con trunk sip de claro colombia
+Wilson Cardenas Hola Wilson, lo pensaba comprar para usar con lineas sip de Claro. No funciona? Funciona con otro operador de Colombia? Un saludo
Leonardo Forero si la puedes configurar pero los tecnicos te cobran entre 420.000pesos y 600.000 pesos es mejor que montes un servidor elastix en un computador con dos tarjetas de red desde un pentiun 4 con 1gb de ram te funciona perfecto y te tardas solo 1 hora configurandolo fuera de la instalacion de elastix
not working
Hi, Thanks for your video, I want to use two UCM6102 as a pair which is I drew in the link below, Can I use this device for such a configuration? thanks
imgur.com/a/JutAoZt