There were some inconveniences while using the drill press table. Among them, the size of the table and the part where I turned the steering wheel myself up and down the table were the most uncomfortable. In this video, I created a system that lifts the table, and a large table with a size of 1,000mm x 700mm. We can easily raise and lower the table with switches, and we can easily fix the board by using a hole clamp on a wide table. The hole that fixes the clamp is also connected to the dust collector to collect the dust. The dust collection system when drilling a drill press and the dust collection system through the clamp hole will be shown in the next video. Please watch the video on how I make the automatic table and find different ways to use it. Thank you.
Thank you for your words. I feel very grateful to those who understand and reference my work. It seems like they recognize my small talent. I will prepare even better videos. thank you
@@cafealpha82 You guessed it correctly. I made these after this work. I hope you enjoy watching these videos. thank you! th-cam.com/video/lbcwiG3Y2gs/w-d-xo.html th-cam.com/video/EvnifmM7uR0/w-d-xo.html th-cam.com/video/mifO3UxWUNk/w-d-xo.html
You possess the most enviable workshop and the use of a magdrill on a thick steel plate is a simple but revolutionary way of true square boring and hole cutting. While your concept here is innovative and functional, I can't help feeling it's somewhat over engineered. The motorised table obviates the need for feeding the chuck down, rather elevating the work up to the rotating drill bit. Looking forward to your next project though, congratulations on this one.
I can feel the kindness and keen observation in your writing. I think it will help me a lot. When I try something new, things tend to go in a direction that feels like it's a bit too much. I think it's because it's not a convenient and familiar method. I place more emphasis on the attempt itself. I think you watched my video carefully. I would like to express my sincere gratitude!
Absolutely ingenious, you sir are one very talented man who in all honesty makes a lot of us mortals feel like we are not very good at what we do. 😊. By this I'm referring to the state of our workshops in comparison to yours. The best thing about all that you are doing or have done is that you're future proofing your workshop and will be able to keep making things and enjoying it way after lots of us are too old and knackered to do any lifting etc. Well done it not only looks great but it's actually built to save you hurting yourself when lifting anything. As always sir 💯% 👍 🇬🇧.
Thanks to your beautiful and wonderful writing, I gained so much empathy and energy. I want to do what I can for a long time. Thank you so much for joining me on my journey to achieve that.
I am deeply grateful for your words. I want to create fusion works that combine woodworking, electricity, metal, and pneumatic cylinders. I ask for your continued support. thank you!
These are words of high praise. I am still an ordinary person who is in the process of learning things one by one. In the process of my learning, if there is something that others can use as a reference, I would be very happy. This proves that the path I'm walking wasn't really wrong. You always show interest, I would like to express my deepest gratitude.
고마운 말씀입니다. 새해 복많이 받으시고, 건강하시길 바라겠습니다. 사실 저는 목공인은 아닙니다. 뭔가 새로운걸 만드는걸 좋아합니다. 특허도 10여개 가지고 있는 발명인이구요. 작품을 만들때, 목공이 가장 기본이 되기 때문에도 열심히 해보고 있고, 그외 전기와 금속에도 아주 약간의 재주가 있습니다. 모든것이 합쳐지는 퓨전 작품들을 만들어 보고 싶어서 노력중입니다. 제가 어떤 여행을 하게 될지 지켜봐 주신다면, 큰 영광일듯 합니다. 감사합니다.
What a mind job of a project! I love it but a build like that could use a better drill press with VFD and all the bells and whistles of modern technology.
Actually, I am also very disappointed. I just used an old drill press that I wasn't using, but I regretted it because I should have used a better product. I'll definitely have to try making it again with a nice drill press later. Thank you for your thoughtful words.
This is the kind of hyper focus I aim for in my shop layout/design. The amount of min/maxing I saw to every aspect was incredible. First video of yours I’ve seen btw. I think I’m in love with those work bench clamp/stops.
❤isso é que eu chamo trabalhar em outro nível. Seu trabalho é admiravel, igualmente seu atelier. Grata pelo vídeo. Vou acompanhar seu trabalho com alegria.
Again a very nice build! This is the second video of yours that I've seen wonderful work, genius build, I've subscribed to your channel for more content. Keep up the excellent work and thanks for taking the time to share with all of us.
Thank you for subscribing. You say such nice things. It may be Western-style, but the phrases about sharing the video always make me feel grateful. It's great to have people who can share someone's passion and hard work. Once again, I would like to express my gratitude.
You Sir always come up with the most incredible ideas and you execute them in such an amazing way and when you get done they work amazingly. Absolutely another incredible build. Thanks for sharing.
I always gain strength thanks to your support. Sometimes I work on something that feels like it's pushing my limits, but I'm still enjoying the process of overcoming it. I will try my best to create meaningful works next time as well. thank you!
I am deeply grateful for your words. I want to create fusion works that combine woodworking, electricity, metal, and pneumatic cylinders. Thank you again.
Este es un cumplido inmerecido. Trabajaré duro para crear mejores obras. gracias This is an undeserved compliment. I will work hard to create better works. thank you!
Very cool build. New to the channel but you have my like and sub for sure. I have a project I am kicking around building that seems like you might be one who would do it proud. I am going to do a CNC table sled / box joint jig. Basically a large 3 - 3 1/2" table saw sled that has a stop block that can be moved by cnc from the blade. My router table miter slots match my table saw too so I could use on both. I was going to do only a box joint jig but I prefer cutting short pars with my sled over a miter. I am going to use a dewalt power wheel battery adapter to power with a 20 volt Dewalt battery. I have seen a couple CNC B?ox joint jigs but not many. I love the Idea of making multiple size box joints on one box. and to have them be exact. Going to check out your channel now!!!
You have a great plan. I can sense from your comment that you are a more capable person than me. The plan to use DeWalt batteries as a power source is very cool. I’m also thinking about several works that use batteries. You will create great work. If my work serves as a small hint, I will be happy too. I will support you. thank you!
I would like to express my gratitude to you for understanding my passion. These are my precious treasures that I have collected over 10 years. Even today, I am wondering how these things will come together in my treasure trove.
Parabéns, ficou uma otima bancada, aliás, não vi nada assim ainda para uma furadeira de bancada, estava procurando algo que me inspirase algo parecido, pois comecei a usar fresas de tupia na furadeira de bancada, porem quero fazer um sistema em que a mesa suba a cada pasada ao inves de fazer a freza descer, pois assim o trabalho fica mais estavel, mas para mim um sistema de manivela ja esta de bom tamanho hehe.
Je pensais que permettre de régler l'inclinaison de la table était trop. C'est presque comme une fraiseuse. Le perçage à angles inclinés utilise un gabarit. Vous pouvez percer des trous sous différents angles avec un simple gabarit. merci I thought making it possible to adjust the tilt of the table was too much. It's almost like a milling machine. Drilling at inclined angles uses a jig. You can drill holes at various angles with a simple jig. thank you!!
That video showcasing the creation of the incredible drill press stand was truly impressive! I couldn't help but notice the variety of tool brands you utilised throughout. Are there any particular brands that you find to be exceptional or stand out among the rest?
Thank you for your kind words. I mainly use Bosch and DeWalt products. The grip is good and the products are stable. If the price is a burden, Worx products made in China seem to be very good these days. Performance has improved considerably. thank you!
Thank you for your words. There are forward and reverse switches, A 1,000W motor with adjustable speed and a controller with rpm control was used. Since it is listed as a product, you can find it online. I purchased it from Ali Express. thank you!
@@Kynosys_ Unfortunatelly, on Aliexpress, most sellers of these motors do not have manuals or programming instructions. I was wondering if you had them, thanks :)
Are you talking about a PCB circuit that can control a servo motor? I'm still studying too. I'm still in the process of purchasing parts equipped with a control program. It looks like you are trying to create your own new control mechanism. I'm sorry I can't help you, and I hope you find success. thank you!
@@Kynosys_ No, I whish, where it's possible, to have manual of your engine servo controller, and which parameters need to activate initial rpms speed, brake function and much more :)
Merci pour cette vidéo très intéressante. Pourriez vous nous dire où vous avez acheté la vis sans fin avec le réducteur de vitesse qui permet de lever la table ?
Someday, when I turn 77, I want to become a cool person who can comment on other people's videos. Why limit the remaining days to 23 years? First, how about extending it to 50 years? Sir. I would like to express my deepest gratitude.
It's a short article, but it's accurate and sharp. I'm still trying to make more things out of plywood rather than wood. During the time of carving and trimming, I am thinking that plywood is suitable for realizing what I have in mind. I also hope that the selection of materials becomes more abundant. Thank you for your kind words.
He must have purchased this drill press used. There’s no way a guy with tools that clean and a shop this organized allowed his drill press to get into that condition.
This is a reasonable inference. If I had continued to use it, I don't think I would have left it like that due to my personality. I used it a long time ago, put it in storage, and it ended up like this. And one thing is that there are some areas in my workshop that are not captured on screen that are very messy. I think it would be similar to how women put on makeup.
You will have a much cooler and more beautiful workshop than mine. The way to achieve that is to dream of what you want and take one step further today. I will support you. thank you!
![⚡[DIY] Just the perfect drill press table / woodworking](/img/n.gif)
There were some inconveniences while using the drill press table.
Among them, the size of the table and the part where I turned the steering wheel myself up and down the table were the most uncomfortable.
In this video, I created a system that lifts the table, and a large table with a size of 1,000mm x 700mm.
We can easily raise and lower the table with switches, and we can easily fix the board by using a hole clamp on a wide table. The hole that fixes the clamp is also connected to the dust collector to collect the dust. The dust collection system when drilling a drill press and the dust collection system through the clamp hole will be shown in the next video.
Please watch the video on how I make the automatic table and find different ways to use it. Thank you.
ㄷ
555ㄴ555555ㄹ5ㄴ5ㄹ5ㄹ5ㄴ55ㄴ5ㄴ555555.ㅈ
you are VERY talented. I'm a mechanical engineer, metal worker, and upholsterer in California and I respect all the custom tools you make. Great job!
I’m going to have to watch this a third time to get the entire concept. What a great idea.
Thank you for your words. I feel very grateful to those who understand and reference my work. It seems like they recognize my small talent. I will prepare even better videos. thank you
This is the first video of yours I have seen. What a gift. Thank you.
There are many more cool items uploaded to my channel. Let’s take a journey into the world of DIY with me. welcome.
Outstanding! Thank you for sharing this video. It was awesome and I can’t wait to watch more. I especially want to see your work bench clamp!
Brilliant.
Thanks for your praise!!
Very good job. You are fully talented... Woodworker, electronics technician, metallurgist, electrician... and even martial art expert (15:43)
Outstanding drill press table !!!
Wow! This has to be the coolest drill press in the world! I love this! You thought of everything!
Could have been perfect table if dust collection is integrated with. 잘보고 갑니다!
@@cafealpha82
You guessed it correctly. I made these after this work. I hope you enjoy watching these videos. thank you!
th-cam.com/video/lbcwiG3Y2gs/w-d-xo.html
th-cam.com/video/EvnifmM7uR0/w-d-xo.html
th-cam.com/video/mifO3UxWUNk/w-d-xo.html
@@cafealpha82 ah! And thank you for the Korean greeting.
Again great video thanks for sharing your work and experience with us
You possess the most enviable workshop and the use of a magdrill on a thick steel plate is a simple but revolutionary way of true square boring and hole cutting. While your concept here is innovative and functional, I can't help feeling it's somewhat over engineered. The motorised table obviates the need for feeding the chuck down, rather elevating the work up to the rotating drill bit. Looking forward to your next project though, congratulations on this one.
I can feel the kindness and keen observation in your writing. I think it will help me a lot. When I try something new, things tend to go in a direction that feels like it's a bit too much. I think it's because it's not a convenient and familiar method. I place more emphasis on the attempt itself. I think you watched my video carefully. I would like to express my sincere gratitude!
Absolutely ingenious, you sir are one very talented man who in all honesty makes a lot of us mortals feel like we are not very good at what we do. 😊. By this I'm referring to the state of our workshops in comparison to yours. The best thing about all that you are doing or have done is that you're future proofing your workshop and will be able to keep making things and enjoying it way after lots of us are too old and knackered to do any lifting etc. Well done it not only looks great but it's actually built to save you hurting yourself when lifting anything. As always sir 💯% 👍 🇬🇧.
Thanks to your beautiful and wonderful writing, I gained so much empathy and energy. I want to do what I can for a long time. Thank you so much for joining me on my journey to achieve that.
@Kynosys_ Sir, you are very welcome and I look forward to seeing what you make in the future!!!
What a great idea.Again,you have exceeded expectations for the coolest,most well thought out shop!
I am deeply grateful for your words. I want to create fusion works that combine woodworking, electricity, metal, and pneumatic cylinders. I ask for your continued support. thank you!
amazing work 💪🏻💪🏻💪🏻
You have a brilliant mind for designing and executing the most amazing builds. I’m so glad you share your passion and knowledge to the world.
These are words of high praise. I am still an ordinary person who is in the process of learning things one by one. In the process of my learning, if there is something that others can use as a reference, I would be very happy. This proves that the path I'm walking wasn't really wrong. You always show interest, I would like to express my deepest gratitude.
That is a very cool drill press
Thanks for your praise!!!🫡🫡
Hi there u have some amazing talent in wood making. X
항상 영상을 볼때마다 목공을 하시는 분이 아닌 과학자의 보습을 보는 것 같습니다. 감히 범접할 수 없는 아우라가 느껴집니다.
고마운 말씀입니다.
새해 복많이 받으시고, 건강하시길 바라겠습니다.
사실 저는 목공인은 아닙니다.
뭔가 새로운걸 만드는걸 좋아합니다.
특허도 10여개 가지고 있는 발명인이구요.
작품을 만들때, 목공이 가장 기본이 되기 때문에도 열심히 해보고 있고, 그외 전기와 금속에도 아주 약간의 재주가 있습니다.
모든것이 합쳐지는 퓨전 작품들을 만들어 보고 싶어서 노력중입니다.
제가 어떤 여행을 하게 될지 지켜봐 주신다면,
큰 영광일듯 합니다. 감사합니다.
What a mind job of a project! I love it but a build like that could use a better drill press with VFD and all the bells and whistles of modern technology.
Actually, I am also very disappointed. I just used an old drill press that I wasn't using, but I regretted it because I should have used a better product. I'll definitely have to try making it again with a nice drill press later. Thank you for your thoughtful words.
This is the kind of hyper focus I aim for in my shop layout/design. The amount of min/maxing I saw to every aspect was incredible. First video of yours I’ve seen btw. I think I’m in love with those work bench clamp/stops.
What a great video to stumble across. It's like I've found woodworking batman. I will have to check out the rest of you videos now!
❤isso é que eu chamo trabalhar em outro nível. Seu trabalho é admiravel, igualmente seu atelier. Grata pelo vídeo. Vou acompanhar seu trabalho com alegria.
@@saradinizlyra9579 Thanks for your sincere words!!!
Again a very nice build! This is the second video of yours that I've seen wonderful work, genius build, I've subscribed to your channel for more content. Keep up the excellent work and thanks for taking the time to share with all of us.
Thank you for subscribing. You say such nice things. It may be Western-style, but the phrases about sharing the video always make me feel grateful. It's great to have people who can share someone's passion and hard work. Once again, I would like to express my gratitude.
You Sir always come up with the most incredible ideas and you execute them in such an amazing way and when you get done they work amazingly. Absolutely another incredible build. Thanks for sharing.
I always gain strength thanks to your support. Sometimes I work on something that feels like it's pushing my limits, but I'm still enjoying the process of overcoming it. I will try my best to create meaningful works next time as well. thank you!
@@Kynosys_ Everything you do in each video in meaningful and helpful if learned so much from watching your video. Thank you
Amazing! Simply amazing!
It's wonderful to meet someone who sympathizes with my passion. I would like to express my deepest gratitude.
Wow-just wow!
Thanks for your sincere words!
Very nice as always Kynosys!😎
I would like to express my gratitude for your words of praise and for always watching my videos. I will try harder.
이번에도 역시 👍👍👍
보는것만으로도 많이 배우고있습니다.
그런데 그동안 건성으로 봐서 못봤는데 장갑은 안쓰시네요.
혹시나해서 지난 영상도 봤는데 역시 안쓰시길래 궁금해서요.ㅎㅎ
명절 연휴 잘 보내시고 건승하시길 바랍니다.
새해 복 많이 받으시고, 모든것이 이루어 지시기를 바라겠습니다.
늘 관심가져 주시는데 감사드립니다.
장갑을 사용해야지 하다가 꼭 놓치게 되네요.
나무를 많이 만지니까 손끝이좀 아린거 같아서 저도 앞으로는 장갑을 사용해야 될거 같습니다.
고맙습니다.
Amazing and inspirational. I am thankful for having found your channel and instantly subscribed.
Wow nice job as always 👌🏻
The word ‘Alway’ means that you always watch my videos. I would like to express my gratitude. I will try my best to create more new works.
Absolutely amazing!!
Excelente trabalho. Parabéns
I am deeply grateful for your words. I want to create fusion works that combine woodworking, electricity, metal, and pneumatic cylinders. Thank you again.
Es vd un maestro de la creatividad con la herramienta. Felicidades con el trabajo.
Este es un cumplido inmerecido. Trabajaré duro para crear mejores obras. gracias
This is an undeserved compliment. I will work hard to create better works. thank you!
@@Kynosys_ sigo sus trabajos espectante. saludos!! se me educó que se aprende de la experiencia...
Very cool build. New to the channel but you have my like and sub for sure. I have a project I am kicking around building that seems like you might be one who would do it proud. I am going to do a CNC table sled / box joint jig. Basically a large 3 - 3 1/2" table saw sled that has a stop block that can be moved by cnc from the blade. My router table miter slots match my table saw too so I could use on both. I was going to do only a box joint jig but I prefer cutting short pars with my sled over a miter. I am going to use a dewalt power wheel battery adapter to power with a 20 volt Dewalt battery. I have seen a couple CNC B?ox joint jigs but not many. I love the Idea of making multiple size box joints on one box. and to have them be exact. Going to check out your channel now!!!
You have a great plan. I can sense from your comment that you are a more capable person than me. The plan to use DeWalt batteries as a power source is very cool. I’m also thinking about several works that use batteries. You will create great work. If my work serves as a small hint, I will be happy too. I will support you. thank you!
how do you not have 100k plus subscribers?! great videos!
I'm curious about that too. Will TH-cam hate me? Thank you very much for your words of support.
I was thinking the same thing.
I just searched for automatic drill press table and this showed up. This channel will be great. I'm positive.
Where does he get all of those wonderful toys?
I would like to express my gratitude to you for understanding my passion. These are my precious treasures that I have collected over 10 years. Even today, I am wondering how these things will come together in my treasure trove.
대단하십니다~ ^^
Parabéns, ficou uma otima bancada, aliás, não vi nada assim ainda para uma furadeira de bancada, estava procurando algo que me inspirase algo parecido, pois comecei a usar fresas de tupia na furadeira de bancada, porem quero fazer um sistema em que a mesa suba a cada pasada ao inves de fazer a freza descer, pois assim o trabalho fica mais estavel, mas para mim um sistema de manivela ja esta de bom tamanho hehe.
Thank you for your kind words. I hope you create great work too. happy new year!
@@Kynosys_muito obrigado!!!
Feliz ano novo para você e toda sua família!
Juste une question : comment on fait pour percer à 45° ?
Je pensais que permettre de régler l'inclinaison de la table était trop. C'est presque comme une fraiseuse. Le perçage à angles inclinés utilise un gabarit. Vous pouvez percer des trous sous différents angles avec un simple gabarit. merci
I thought making it possible to adjust the tilt of the table was too much. It's almost like a milling machine. Drilling at inclined angles uses a jig. You can drill holes at various angles with a simple jig. thank you!!
That video showcasing the creation of the incredible drill press stand was truly impressive! I couldn't help but notice the variety of tool brands you utilised throughout. Are there any particular brands that you find to be exceptional or stand out among the rest?
Thank you for your kind words. I mainly use Bosch and DeWalt products. The grip is good and the products are stable. If the price is a burden, Worx products made in China seem to be very good these days. Performance has improved considerably. thank you!
Cool :) Sorry, may I have programming instructions for servo motor controller? Thanks in advance :)
Thank you for your words. There are forward and reverse switches, A 1,000W motor with adjustable speed and a controller with rpm control was used. Since it is listed as a product, you can find it online. I purchased it from Ali Express. thank you!
@@Kynosys_ Unfortunatelly, on Aliexpress, most sellers of these motors do not have manuals or programming instructions. I was wondering if you had them, thanks :)
Are you talking about a PCB circuit that can control a servo motor? I'm still studying too. I'm still in the process of purchasing parts equipped with a control program. It looks like you are trying to create your own new control mechanism. I'm sorry I can't help you, and I hope you find success. thank you!
@@Kynosys_ No, I whish, where it's possible, to have manual of your engine servo controller, and which parameters need to activate initial rpms speed, brake function and much more :)
Increible
Thanks for your interest nd praise!!!
Merci pour cette vidéo très intéressante. Pourriez vous nous dire où vous avez acheté la vis sans fin avec le réducteur de vitesse qui permet de lever la table ?
what type the chuck do u have drill press?
This is a product called Keyless Chuck. You can tighten the bits by hand. thank you!
Suuuper
I would like to express my sincere gratitude for your long and sincere comment.
I’m 77 so only have 23 yrs left in me in my shop.....don’t have spare time to do this specially after seeing those can cupboards.
Someday, when I turn 77, I want to become a cool person who can comment on other people's videos. Why limit the remaining days to 23 years? First, how about extending it to 50 years? Sir. I would like to express my deepest gratitude.
wizardry!
Thanks a lot.🫡🫡
Mistakes are for humans! Plywood king 😉😉😉
It's a short article, but it's accurate and sharp. I'm still trying to make more things out of plywood rather than wood. During the time of carving and trimming, I am thinking that plywood is suitable for realizing what I have in mind. I also hope that the selection of materials becomes more abundant. Thank you for your kind words.
@@Kynosys_ You're welcome king
👏👏👏👏👏
Thank you so much for your kind love!!!
😊
Thanks for your interest!!!
👏🏼👏🏼
Thanks for your praise!!!
He must have purchased this drill press used. There’s no way a guy with tools that clean and a shop this organized allowed his drill press to get into that condition.
This is a reasonable inference. If I had continued to use it, I don't think I would have left it like that due to my personality. I used it a long time ago, put it in storage, and it ended up like this. And one thing is that there are some areas in my workshop that are not captured on screen that are very messy. I think it would be similar to how women put on makeup.
😮❤
Thanks for your interest!!!
9시간29분43초
제작하는 시간을 어림잡아 보신걸까요?
궁금하네요.
Great idea! I'm going to do this for my drill-press, too.👍
p.s. so jealous of your shop, it's awesome.
You will have a much cooler and more beautiful workshop than mine. The way to achieve that is to dream of what you want and take one step further today. I will support you. thank you!
Thanks for your praise!!!