@@LAndreHM I agree on stability and speed but don't you think there is something stylish about a trike - like a Morgan. If you want speed then go quad.
@@sushantkoli182 Why is it that eveyone wants more speed. Maybe they want to kill themselves early, but a nice trike like that is stylish and has speed. The weight is at the back and on the rear wheel. It has the grip it needs and the power from the motorbike engine.
wish i have friends like you guys, so you can help me build thing as well, i have a reverse trike, using a honda 70 engine, and stil got a few in my head on special projects.
Fascinating build! Amazing work! Not sure it the back tire was spinning on the dirt or if the gearing was too low. Could definitely put on a taller tire in the rear tho. Inspirational build. Wish I had a parts warehouse like you guys! Super jealous!
@@brmcf yes he did lmao on the floor with the manual shifter from a vehicle, 3-4 shifts up and down, did you even watch the video? And he couldn't drive faster because his clutch plates were worn out.
You mean to tell me my flip flops have no steel-toe reinforcement!?!?! Dont worry, hopefully the first component to break isnt drivetrain/suspension related...... be safe and have fun while learning, everyone!!!
Love how they know exactly where everything is, it’s almost like they found the parts placed them in random spots positioned the cameras to look at them and BOOM easy views
Love the idea and I ,watched the vid and made a mini beetle car with the same type off idea and have made my own v4 engine from scrach its awesome and I love it thank you..
@@esperanza4390 yes it's a death trap. Look at the atrocious suspension design on the front and it's even worse on the back. No sway bars, the angles are all off, cheap ass shocks from aliexpress, unsprung weight on the back is insane, no brakes on the rear and the whole thing is made of fucking box section he probably got at the nearest home improvement store LOL what a joke. You can see the thing is all over the place at 15mph, feathering the throttle like that. Give it some gas and you're dead meat. A 212cc go kart engine would already be overkill for this thing, let alone a 1000cc motorcycle engine. They are clueless.
Well you did it again!. Now you build this three wheel car that will out run everything in town. You guy’s or something else. You and your friends enjoy that red three wheeler, be careful driving that thing around. Later my friend. Don Powell, Tyler, Texas.
This channel went from DIY rc toys made out of popsicle sticks (really cool ones) to real life vehicles, and this makes me very happy. Congratulations Creative Channel!!!
@@Codyjames83 Why build legit toys when you, digger and the goonsquad can quickly whack together a knockoff Tricera-wheels 3wheeler mobile!?!?!? Oh man that top box for the front end really could use a gusset or ten.... why such big gaps in the frame structure/chassis!?!?@?@?
I am not asking for the go kart he made Pls do not talk like this without understanding I'm asking him to make a battle bot for robowar And pleading to make fast because I have a robowar comming
I wish I had that parts room! Wow that's amazing
Im nearly certain the clutch is slipping on this .
Amazing creation again 👍👍✌
He probably has space shuttle parts back there somewhere
Hi friend nice comment 👍 👍
Yeah lol definitely.... He has maybe more parts than his local hardware shop..
Nothing is impossible for this guy.
He can build everything with everything.
And a flux capacitor
U know something.... Maybe he has an entire spaceship garage somewhere ಡ ͜ ʖ ಡ
I love your every project
I wish I was as creative as you and smart as you for the go-karts you make and the off-roading in the plains you make is awesome
I wish the seats and the roof would be a little bit higher. Great job though bro
Next project: Homemade Helicopter
wtf :D
Yes plz
Or train
Hahahahah
That is only left to build !
Great project, now this is something I want for myself.
!swosjoiajsksmwkqomsm
Oskwkajkka
BRAVO VERY GOOD VIDEO GEORGE ATHENS GREECE
Our future generations is like this Vedio.
Mais algum BR louco Aki?
Wish it would be of 4 wheels, that could add more stability and speed due to increase in grip
Gives it a unique style - too many quads on TH-cam and not enough trikes!
@@gucu Why do you think there are no enough trikes on TH-cam? It is because quads are better in stability and speed ...
@@LAndreHM I agree on stability and speed but don't you think there is something stylish about a trike - like a Morgan. If you want speed then go quad.
@@gucu I am just saying bro, It looks gorgeous, something very eye catchy and unique. But if you want to achieve higher speed , then 4 wheels are gr8.
@@sushantkoli182 Why is it that eveyone wants more speed. Maybe they want to kill themselves early, but a nice trike like that is stylish and has speed. The weight is at the back and on the rear wheel. It has the grip it needs and the power from the motorbike engine.
This video feels like if primitive technology wasn't so primitive.
My dreams is to visiting you one day bro bcz you knows more of technics in your head
Very revvy engine with lots of pickup!
YOU ARE THE MAN!! You've been an inspiration for me to start my channel and upload my first project. Thank you!! 💪👍
Subbed!! So nice to be a first project dude!!
Keep working like that and you'll become big on YT, I like your stuff
Elite Worm Nice!!
@@pplg-yt sexv3dio
@@pplg-yt d
Your clutch is either out of adjustment or just dead.
Hey, give him a benefit of doubt. At least he did something that amazing.
Well if he’d take his foot of the clutch smh
Why
Yup. Clutch sounds beat.
wish i have friends like you guys, so you can help me build thing as well, i have a reverse trike, using a honda 70 engine, and stil got a few in my head on special projects.
Excellent work 👍
You guys are awasome ❤❤❤love from india
This guy: Im gonna make a badass burnout on this dirt
The clutch: No
Čech?
Lol
@@DonRayec 😊😁😁😃😃😁😁😁😃😃
😁😁😁😁😁😁😊🐶👟👟👟👟👟👟
Ýäńđhřä ŕèţý įœ
can u guys imagine how lucky his son is
Yes dd
😁
Yes
Slm PASAR banyuwangi pesen duluan Indonesia banyuwangi jatim
yeah, all these pieces, metal…it’s my paradise
i want to see the acceleration and top speed of this thing
It was already all over the place at 10mph. Do you want to kill them? lol
@@fullmetaljacket7 😂
FULLMETALJACKET7 up
ش
yeahhhhhh😍
Nice creations
why this channel not have 50 million subs?
For those asking from what motorcycle is that engine... That's from Kawasaki Z1000/Ninja 1000/Versys 1000
So what you are saying is that engine is from a motorcycle?😂
@@w201_mort3 Yep... its from Kawasaki Z1000
You have my dream shop you have it stocked like a whearhouse do you run a shop out of it all so...love you videos they're great
It's called a "chop shop".
The amazing part is the guy welding with flip-flops on
Or bending with a harbor freight pipe bender
Lol.. Go to Philippines, they also weld without top clothings
they are safety flip flops
@@jeankurtbuenviajebarroa9226 I made that mistake once lol
زربة
nice ......keep it up...i like it
Eyeball engineering at its best
I would build one with 4 wheels ,doors and saftey belts
Why!? Bcuz galvanized fence posts, that's why!!! You're just super duper jealous of thier awesome hoonicorni mobile 3-wheelsermabobuhmajigh...
A car
you might try to make a offroad car with diesel engine.
More of an elaborate engine stand.
Do they appreciate how powerful it is. I'm getting worried now..
So very beautiful
i love their precision in doing their work with no errors
I think you're eating your clutch it doesn't sound right ! And please wear a seat belt ;)
Fascinating build! Amazing work! Not sure it the back tire was spinning on the dirt or if the gearing was too low. Could definitely put on a taller tire in the rear tho. Inspirational build. Wish I had a parts warehouse like you guys! Super jealous!
One day you will build a helicopter.. I believe !
Ricardo Fontes They are to stupid to build a helicopter
Just one day
ffdhxsyighfufvufvhç
nfu
If theres a zombie apocalypse this guy may survive
Next project ; Is Home Made Lamborghini...
When will you build a plane?
It sounds like your clutch is slipping, as a rider you should get that checked if you want your ride to last long
I've notice many projects made on this channel aren't made to last😂
Haven't seen him shift once
I think they don't hay a gear box
That poor clutch, at that rpm (around 6-9k) should've been ripping the tires in the sand, not the clutch plates. LMFAO!
it is a cvt ,should of had a 3 speed gear box instead.
@@Jozavenue that did not have a cvt trans on it, he was going straight from the gearbox to the rear wheel and it's a 6 speed trans.
No, that is not a CVT. Yes, the clutch was slipping. Awesome build. I couldn't believe they put the seats in with drill screws! ;-)
@@jlucasound he thinks he knows what he's talking about because he has bikes in his name...🤣
Vow! Amazing!
আমাকে খুব ভালো লেগেছে
You should drive faster. It was not satisfying for me
He didnt put a shifter in
@@brmcf yes he did lmao on the floor with the manual shifter from a vehicle, 3-4 shifts up and down, did you even watch the video? And he couldn't drive faster because his clutch plates were worn out.
"Just whip this together real quick. Looks good to me!!"
"Anyone know which way to the hospital?"
You mean to tell me my flip flops have no steel-toe reinforcement!?!?!
Dont worry, hopefully the first component to break isnt drivetrain/suspension related...... be safe and have fun while learning, everyone!!!
The rear shocks lol
Love how they know exactly where everything is, it’s almost like they found the parts placed them in random spots positioned the cameras to look at them and BOOM easy views
O
Love the idea and I ,watched the vid and made a mini beetle car with the same type off idea and have made my own v4 engine from scrach its awesome and I love it thank you..
Nice video
Wow. What a death trap. These guys have no idea what they're doing.
Trap? Its a Fun Bike. They know what they do. Can you built a Trike like this?
@@esperanza4390 yes it's a death trap. Look at the atrocious suspension design on the front and it's even worse on the back. No sway bars, the angles are all off, cheap ass shocks from aliexpress, unsprung weight on the back is insane, no brakes on the rear and the whole thing is made of fucking box section he probably got at the nearest home improvement store LOL what a joke. You can see the thing is all over the place at 15mph, feathering the throttle like that. Give it some gas and you're dead meat. A 212cc go kart engine would already be overkill for this thing, let alone a 1000cc motorcycle engine.
They are clueless.
Few days later, Making an electric powered Aircraft... 😂😂😂
😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭
Well you did it again!. Now you build this three wheel car that will out run everything in town. You guy’s or something else. You and your friends enjoy that red three wheeler, be careful driving that thing around. Later my friend. Don Powell, Tyler, Texas.
I see you have a helper today.
It looks good but if you made doors and windows and put glass in front it will look amazing
That cage will implode on impact.
These is that OSHA video chopped and screwed
Between the 'tacktacktack' welding and the eyeball engineering, that thing's a deathtrap. That cage is about as triangulated as bowl of noodles.
because its thin wall tubing probably
I almost caught something watching them build this
Nah just the sheer horsepower it had
Like I'm not someone to post a lot of hate comments but this has to be the ugliest "vehicle" I've ever seen
Finally a common sense comment. I wouldn't trust that thing to hit a pothole.
His friend: Bro thats not even close to what it's on the other side
He: Naah it'll be good
Welding skills 100%
Nice car
Welding galvanized tubing ought to be great for your respiratory system.....not.
Kevin N we unfortunately have to deal with it at my shop fairly frequently. Instant zinc oxide poisoning
must be the reason why he has 10 hairs left as a beard
This channel went from DIY rc toys made out of popsicle sticks (really cool ones) to real life vehicles, and this makes me very happy. Congratulations Creative Channel!!!
Welding with flip flops and lifting a 1000cc engine with a flimsy crane....
Jeremy Clarkson: "How hard can it be??"
*audience laughs....
Masha Allah amazing structure.
Nice 😀😀😀☺️☺️🤗😍
hermoso proyecto.
solo una modesta observacion, la altura de los asientos.
saludos desde peruvian
I'm confused is this a store or someone's shop
His house,he probably has planned this project and gather all the stuff he needed before they clip it
@@joeery5699 ya still they could have built 20 different things with the parts I seen in the video
@@Codyjames83
Why build legit toys when you, digger and the goonsquad can quickly whack together a knockoff Tricera-wheels 3wheeler mobile!?!?!? Oh man that top box for the front end really could use a gusset or ten.... why such big gaps in the frame structure/chassis!?!?@?@?
'Engineering has left the chat'
Все просто, когда все есть! Круто.
My dreams is to meet you one day bro
The containers you guys have gas/antifreeze in makes it look like you’re using olive oil for gas and Mountain Dew for coolant
I am pretty sure he taught Elon musk everything.
واو😲😲 تحية الك من العراق 😍😙
مش عربي
i was expecting something out of cardboard , but noooo a real one . :)
I like the key of that car also
Yea... cuz, yaknow... you just had all that lying around.
This dude litterally just made this thing in about 1 week and didn't use a single part from his other projects but things he just had laying around...
The problem is it’s probably going to flip over 🧐
And that roll cage is made out of material that will be ceushed easily
Very creative.. You are an Genius... Greetings from Germany :-)
👍I like you.
As an engineer, this is nightmare to watch
I'm writing this many times because I really need it before 20 November 2019 as I have a competition
Lol u expext him to give it to you for free
And why would you sign up for a competiton if you dont have anuthing to drive lol?
@@antonesbjornsson truee
Anton Esbjörnsson anything*
I am not asking for the go kart he made
Pls do not talk like this without understanding
I'm asking him to make a battle bot for robowar
And pleading to make fast because I have a robowar comming
I was just waiting the whole video to see a big pull. And you didn't
j aime cette chaine mais il y a beaucoup trop d annonce .....ils font du bon travail
Sometimes you can fill pipes with packed dirt before you bend them and they will maintain their cross section shape (round, square, etc).
I love the way he just have to pick everything he needed from his “lab"
He's rich
I always like the builds, but man does it kill me to watch how they weld..
I love how he just has all this brand new shit laying around
Espectacular
..
Slm PASAR banyuwangi pesen duluan Indonesia banyuwangi jatim
Slm PASAR banyuwangi pesen duluan Indonesia banyuwangi jatim
This was outstanding sir
สวยมากๆเลยครับ
Damn i see theyve upped their safety this vid....aaaannnnd hes drilling with his hand as a vice.
Chigga wasn’t even switching gears 😂😂
I was waiting for the clutch to start smoking.
Cool setup but it was impossible to see if it had any speed.
Please make a car using this engine....
٥فتالتتتتت اللي بو لو أن اتلgg0fhhz0bg
@@ahmadyameen445 44
ك
:_8484334749
nice suspension
Tienen un montón de cosas en todo el arsenal!!!😱
It's really nice artwork, wish that I could have that vehicle someday
Abner Solis dufhdnv
@@مصطفىمصطفى-ش4ض3ض
تنطيني ياها بلهش
when you build stuff like this you gotte let it rip
J
Вы увидели, как собирается любой китайский автомобиль.
СИГИЗМУНД ТПРУТПРУТПРУЕВИЧ 😂да
Зато крепче и лучше жигуля ))))
Так скорее всего собирают весту😂😂😂
Это опытный образец,дальше интересней :)
@@КонстантинВояжинский врятли эта хуйня крепкая.
That thing looks like it would be so much fun to drive.
Good Job Brothers😎👍! Keep up The Awesome Work!