Part 3: Battery(32650) test with common appliances. Check this one out. (With English sub).

This is the part 3 of our DIY battery bank. In this video we are going to test the capacity of the battery and at the same time we are going to use basic appliances to simulate use during power outage. #lithium #32650 #lithiumbattery #solar #18650 #powerbank #poweroutage
Test your battery capacity:
• How to use and set-up ...
Part 1: Building the bank from scratch.
• PART 1:Building a batt...
Part 2: BMS and Active Balancer installation.
• PART 2: How to install...
Work from home computer desktop powered by a DIY battery bank from scratch.
• A desktop computer, 2 ...

[@PANTER0816]

salamat sa content mo lodi very helpful ❤

[@blogskiesdiyprojectssolare8634]

Part 1: Building a battery bank from scratch.
th-cam.com/video/U_HqqbeKQ9U/w-d-xo.html
Part 2: BMS and active balancer installation
th-cam.com/video/T6RTpDbNFJw/w-d-xo.html

[@crisostomodequit8786]

Greetings pre, pero pasensya na, kasi parang hindi 2.88KWH ang pakinabang sa 62.1AH ng battery mo. Display ng PZEM-015 791watts lang. (P=IE). Humihina ang battery habang ginagamit. Simula 14.4V bumaba hanggang 11.9V kaya siguro average diyan, mga 12.74V, (791 divided by 62.1 equals 12.74V. Kung ang TBE inverter mo may 90% efficiency, mga 711watts lang ang power na naging product. (791 X 90% = 711.9watts(AC) sa PZEM-020. Tsaka pansinin, sa umpisa ng presentation, mayroon ng 2.17KWH na nakita ko. Kaya 2.88KWH minus 2.17KWH equals 0.71KWH or 710Watts. Isa pa, sa napansin ko, ang consuming load (Power) ay 147+or-Watts lang, pero kung sumahin ay 218Watts. (90+50+60+6+6+6 = 218Watts) sa PZEM-020. Bakit kaya? Ang gamit ko Keweise KWS-AC300 na may kasamang Open-Close Current Transformer (CT). Sa una hindi rin tumutugma. Pinagpalit ko ang wire na dapat papasok sa loob ng CT at ang pwesto ng CT sa loob ng box na ginawa ko, kaya iyon, lumapit ang display sa wattage ng actual load na ikinabit ko. Pasensya na bro ha, kung mali ako, Cheer!

[@webspeed2704]

Pa link po saan nabili ung inverter 500w pure sine wave mo po

[@blogskiesdiyprojectssolare8634]

dito ko po nabili...so far ok po yung inverter
shopee.ph/product/301705550/4550428304?smtt=0.516144575-1649060092.9

[@kahingaltv2023]

Master done with Part 1 and Part 2 - Dito na ako sa Part 3.

[@webspeed2704]

Tanong po may LVD po ba ung setup nyo?

[@blogskiesdiyprojectssolare8634]

Meron po. Sinet ko po sa 12.1volts LVS. Ang HVD naman po 14.4v.

[@webspeed2704]

May link po kayo non? Video tutorial at may relay po ba din?

[@byroncamarao6694]

Benebenta nyo ba yan sir battery bank.

[@webspeed2704]

Paano isetup ang 2 types of pzem po. Sana may video tutorial. Galing mo po magsalita malinaw po.. kka.subscribe ko lang

[@blogskiesdiyprojectssolare8634]

thank you po😀.. gagawa po ako mg separate video tutorial para sa mga PZEMs