Hi, thanks a lot for your movie. I have one FS-i6 to 10CH but for some reason no manual was attached to it. Your instructions are clear! Thanks again for help.
Hi! I upgrade my transmitter and it binds with the fs-ia10b reciever but when I put a servo to test nothing happens...at any channel. I have set up the auxillairy channels and the failsafe. Thank you for your support.
Thankyou for this. Your channel is very helpful. After the firmware upgrade, besides the increase in no of channels, were there other useful enhancements ? Any disadvantages ?
All this transmitter crap video that is in the you tube, yours worth of a million, seriously Flysky should pay you for this awesome presentation. Like Kunal said: I can go and buy the fs i6. thank you for the video. keep it real my friend.
my flysky transmitter looses signal and gets unbind bought a new reciver then too had the same problem please help sir from were to buy the USB cable to upgrade firmware to make it 10 channel
The video claims to show how to upgrade 6 to 10 channels. However, you start off with 10 channel. How exactly does this explain how to make the upgrade? If you change the title it would be a good video.
I think only you make video how to upgrade firmware and bind with 10ch rx then try the channel one by one.. It's great and clear video i've seen..thanks😃🖒
100% Yes, My all FPV flights are with iA6 and iA6B th-cam.com/video/GFye30SoJe8/w-d-xo.html th-cam.com/video/3s2bG8JP888/w-d-xo.html Both flights are approx 1 Km range
MakerHand I tried back to default firmware but it doesn't work either..or my way to roll back wrong? Which Exe should I use in all the file? Thx for reply me
I want to make a flying wing so I buy a flysky CT6B I I don't know how to set up 2 position flapserons please up load a video Sir it may request have a nice day sir
There is link in the description, where you'll see how to do that. And if you want the proper 10Ch firmware then contact me I'll send you the proper 10Ch firmware.
Sir how can I get a radio like this ,I need it for my project at school am from Nigeria, I need your response, sir I need your help to get this GOD bless sir as response.
Bro please check the description of the video, there you will get a step by step video's link and the link of Firmware which I have used is also in the description.
The first 3 days with the remote control I could not drive backwards, it cost me a lot of nerves, until that worked. And i dont know exactly what ive done lol If I read the comment sections of the i6 remote control videos in connection with rc cars, I was probably not the only one ^^
you need to connect the ESC to the channel 2 because in channel 2, the stick stay at the middle position(1500) in car esc 1500 is stop below 1500 is backward above 1500 is forward
Thanks a lot for this video..
now I can peacefully buy fs i6 !
Awesome, thanks. I needed someone to test it aswell to be sure and you did.
Bro my F's i6 show 6 channel in display and aux channels show only channel 5 and Chanel 6 how to do so
Hi, thanks a lot for your movie. I have one FS-i6 to 10CH but for some reason no manual was attached to it. Your instructions are clear! Thanks again for help.
why the ppm still out put 6 channels after mod.?
How did you get it be 10 channels at the start
is it possible to achieve 10 channel using fs-i6 and fs-ia6b on ibus?
iA6B = Yes
iA6 = No (Do not have ibus)
Hi! I upgrade my transmitter and it binds with the fs-ia10b reciever but when I put a servo to test nothing happens...at any channel. I have set up the auxillairy channels and the failsafe. Thank you for your support.
Thankyou for this. Your channel is very helpful. After the firmware upgrade, besides the increase in no of channels, were there other useful enhancements ? Any disadvantages ?
It only gives you extra channels no other advantage or disadvantage.
@@MakerHand nice! thank you
All this transmitter crap video that is in the you tube, yours worth of a million, seriously Flysky should pay you for this awesome presentation. Like Kunal said: I can go and buy the fs i6. thank you for the video. keep it real my friend.
How to buy 10 channel receivier
Does it support diffential thrust
Yes,
th-cam.com/video/3E84D_Agz7c/w-d-xo.html
After software upgrade to 10 channel
@@bsrln yes
Thank you for replying and support 🤝
my flysky transmitter looses signal and gets unbind bought a new reciver then too had the same problem please help sir from were to buy the USB cable to upgrade firmware to make it 10 channel
You can use any FTDI adapter or arduino or the cable comes with CT6B
Went to download the latest firmware from flysky and the file had a virus on it.
That's unfortunate
Where to buy just Fs ia10b reciever ?
Which is better rc transmitter and receiver
FLYSKY के दस चेनल को 12 वॉल्ट के 12 DC motor join करसक्ते हे क्या और कसे
Please show how to connect lights in reciever
HI bro were to buy 10channel trancemeter
dose it work on fly sky fs-t6?
Can 6 channel' without update' flysky transmitter bind with 10 channel flysky reciver
Was wondering what cable you used to power the receiver on.
Great info now I like even more this radio, good job
How can i buy this products here in afghanistan?
The video claims to show how to upgrade 6 to 10 channels. However, you start off with 10 channel. How exactly does this explain how to make the upgrade? If you change the title it would be a good video.
Sir how many range of this reciever please tell me
more than 1 KM
Thanks sir
If I upgrade it to 10channel, can I still use my irx6 multiprotocol? Thanks
my flysky fs i6 is not working after this it is showing warning ?
Can flysky 6 channel without update in 10 channel bind with 10 channel flysky reciver
it will bind but only 6 channel will be work
@@MakerHand thank you
I think only you make video how to upgrade firmware and bind with 10ch rx then try the channel one by one..
It's great and clear video i've seen..thanks😃🖒
Can u tel me roght hand throttel and left hand throttel
right hand throttle is mode 1
left hand throttle is mode 2
Amzon pe choice he right or left
@@v44tech25 oha pe serf left milta ha (mode2)
Samja naheee
@@v44tech25 on Amazon you will get only left hand throttle
Bhai ,
Kya hm hr channel m moter use kr sakte h ?
Kyoki mujhe plane nhi banana h
Bada sa Ship banana h
Yes kar sakte ho
Can be for rc dump?
Bro after upgraded the flysky fsi6 into multiprotocol mode, can i connecting it to ky101 or hjhrc drone?
If it support its protocol them yes
can I update fs i6x to 10 channel????
Please reply……don't ignore it please
i6x already a 10 channel transmitter from factory
@@MakerHand then I need a 10 channel receiver for fs i6x?????Please again reply me please……please sir reply me
@@MakerHand reply me sir
www.banggood.in/Flysky-2_4G-10CH-FS-iA10B-Receiver-PPM-Output-With-iBus-Port-p-1059821.html?p=6805044548439201605Q
But how did u do the setup and upgrade from 6to10?
link in the description
Please give me one tramsmiter
Now my FS i6 will become fs i10
does the upgraded 10 channels version still bind with ia6b receiver in PWM? thank in advance those who can answer.
100% Yes,
My all FPV flights are with iA6 and iA6B
th-cam.com/video/GFye30SoJe8/w-d-xo.html
th-cam.com/video/3s2bG8JP888/w-d-xo.html
Both flights are approx 1 Km range
MakerHand thanks a lot man i thought it only work with the ia6b in ibus set up because i only familiar with pwm set up.
It works perfectly with PWM, I also use PWM for my fixed wings
MakerHand thanks again god bless
MakerHand does this upgrade reversable to original firmware?
im worried if i cannot bind it with my tiny whoop
Excellent explanation
Make a thorough but slowly for beginners
Make more close up as to make this video more interesting n meaningful
TQ
Do you have more mixing channels after this?
Unfortunately NO :(
excuse me..my ch1 and ch2 doesn't work after i upgraded...i have no idea why..
Please do it again, and check all channels. if still you face the same problem then roll back to default firmware.
MakerHand I tried back to default firmware but it doesn't work either..or my way to roll back wrong? Which Exe should I use in all the file? Thx for reply me
There is a link in the description box for the stable firmware.
Does this mean that Fs i10 is actually FS i6 w.r.t the hardware ?
80% same
How did you do to get 10 channels
Myne is always showing 6 channels SW A CHANNEL 5
SW C CHANNEL 6
If you can make a video how you make it 10
hi!
i upgraded my flysky fsi6 to 10ch and now i can't bind it to my fsia6 receiver... do you have any suggestions?
Mine works perfectly try to re bind if not bind then re reflash it with the firmware which is given in the description.
From where you brought this transmitter
From Banggood but now I suggest you to buy Transmitter from Gearbest and choose India priority mail to avoid customs
Why not from banggood
And thankd
Because of customs
How to contact u sir ??. Pls help me
Is it supports Fly stabilizer mode???
yes,
8392026619 whats app
Sir please how can I get this radio ,I want to use it for my project in schools, am from srilanka sir please I need your response GOD bless.
you can buy it from banggood, aliexpress and also from your local radio shop
@@MakerHandbro if any costum charges or may lock
@@DrAVRECEIVER no customs charges
Hey can you tell how can we extend rc plane range
upgrade your transmitter and receiver
Super video ..thanks...
But How update you
link is in the description
I only have 6 channels in my FS i6 receiver
Buy a 10ch receiver
Plz send your mob no plz
I need you
@@sachinmali6879 me
But how did you updated to 10 ch
All links are in the description of the video.
hi, is it also applicable to eachine i6? I mean, can it also be updated to 10 channel, how?
Yes, you can.
aap nai transmitter kha said liya
banggood
can I buy transmitter from banggood to India???
yes, you can if " India direct mail" option is available as shipping method.
MakerHand thank you bro
Thanks bro :-):-)😊😊😊
Did you bind this transmitter 2nd time
Mean 1st by 6 ch receiver.
And 2nd by 10 ch receiver.
Please reply don't ignore😋
Yes can use upto 20 receiver because it has 20 model memory
Makerhand I am a youtuber please reply what is that yellow sheet which many people in their videos please reply😅
corrugated plastic
From where you buy it from banggood or amazon please share the link to me I am also an Indian please contact me on 9810891328
I want to make a flying wing so I buy a flysky CT6B I I don't know how to set up 2 position flapserons please up load a video Sir it may request have a nice day sir
how much cost of this transmitter
2.5k
How to upgrade 6channel to 10 channel can u explain
There is link in the description, where you'll see how to do that. And if you want the proper 10Ch firmware then contact me I'll send you the proper 10Ch firmware.
MakerHand pls send me your contact details
See the "About" section of my channel
MakerHand thank you bro
Sir how can I get a radio like this ,I need it for my project at school am from Nigeria, I need your response, sir I need your help to get this GOD bless sir as response.
th-cam.com/video/9LPvmV0rAIU/w-d-xo.html
link is in the description of the video
nice sharing..can add more servo motor.
Yes, thanks
Super radio... ale co timer? není ......škoda
Thanks a lot bro
Always welcome
Great video cheers!
Thanks
Just make a video how you did it
Bro please check the description of the video, there you will get a step by step video's link and the link of Firmware which I have used is also in the description.
fantastic video. thanks frend !
Good Good vídeo -like - Brazil
Thank you
You dint show how to do it
Step by step video link is in the description
@@MakerHand okkkkk
Up to 10km
thanks bro.
এগুলোর মূল্য কতো
I did it to 14 channels .....get an upgrade to your old 10 channel firmware.
How did you upgrade it?
Link is in the description
its really hard to setup this remote for cars lol
no it's not
The first 3 days with the remote control I could not drive backwards, it cost me a lot of nerves, until that worked.
And i dont know exactly what ive done lol
If I read the comment sections of the i6 remote control videos in connection with rc cars, I was probably not the only one ^^
you need to connect the ESC to the channel 2
because in channel 2, the stick stay at the middle position(1500)
in car esc 1500 is stop
below 1500 is backward
above 1500 is forward
Nice video bro give me link to buy it
Grazie Mille!!!!
Can you please help me man i crying
What kind of help???
@@MakerHand I dont have 10 channels
only the 5 ch and the 6 is on the radio
@@MakerHand is only 5ch and 6ch on the radio
@@maxherd6217 scroll down
Bro.. u have any whatsapp group???
No
Bengali ho kya
Yes !!
Wrong title of the video
Why???
MakerHand Where is the video to upgrade?
Link is in the description
after the upgrade the SBUS become avaible?
No
I support i-Bus only, for sbus it require dedicated hardware module.
Thanks a lot bro