Awesome stuff Mark. You're officially the only person I go to when it comes to setting up my Bravo with various aircraft. Your 2020 vids were perfect, so I knew you'd get 2024 spot on. Looking forward to the jet profiles.
This is by far the best turorial on setting up the Bravo in MSFS 2024! I really appreciate your effort and determination. It's a shame that good quality documentation is not done by the manufacturers any more. It's done by enthusiasts like you. Thank you! I fiddled around quite a bit in the last few days and found out that indeed there are still so many bugs and inconsistencies between planes. I really like the new C208. But as a standard plane, it's probably dumbed down for the console crowd. Therefore the mixture instead of condition axis 😕
Thanks again Mark, great help. I did some experimenting and noticed that with the toggle switches, assigning "on" and "off" makes the switches react significantly quicker in the sim than with the "set" command, just an observation 😉
Thanks Mark. These bindings tutorials are really useful. I’m looking forward to the one you have planned for the VelocityOne Flight controller which of course has both the vernier and lever controls on the throttle quadrant. I’ve already bound a few types of planes in MSFS 2024 based largely on your MSFS2020 tutorials, but it will be great to have your take on how to do it in MSFS 2024. I am actually quite a fan of the new system because once set up there will be no need to think about the correct profile to use after switching plane types, like we had to do with 2020.
Thank you, Mark, for yet another top-notch tutorial! Your dedication and the help you’ve provided to the community over time are truly invaluable. We deeply appreciate all that you do ( Pierre from Belgium)
That badge when you have multiple inputs bound, cover over the button number! What dev or qa person thought that was the place to put it!! I hope they fix that, but not going to hold my breath.
I’ve experimented with all the reverse throttles and got no where. You’d think ‘throttle full backward’ would do the trick but it doesn’t even work. Thank you sir!
ooh! .just what i needed mark ... thanks spent an hour at the weekend setting up my bravo for the a2a comanche and the sim doesn't seem to save my profiles 😒
Thumb up for this helpful video! Please can you confirm that light system doesen’t work on this Honeycomb Bravo? (Gear led, autopilot led ecc.) Cheers from Italy
Mark: As always, another very useful instructional video. I was doing fine following along until you got to the Caravan. Your directions upended my plan to just create the same profile and bindings I had for the Caravan in MSFS2020. So, how in the world did you find out about the new commands?!? I ask because, even though I can "borrow" what you did for the Caravan, and even adapt those for the some of the twin turboprops, now I have no clue on how to set up the TBM's and the PC-12 since they have rather unusual configurations. Also, have you ever tried to set up the new Cessna 408 Courier? I could never get the condition levers to work with either my Bravo, or even using 2020 keyboard commands assigned to the mixtures. I have no clue if I am doing something wrong, or its another "bug". Thanks again!
Thank you,Mark a great video again. It became very clear to me up to two bindings for a twin turbo. What about the "hold throttle reverse trust" and the "throttle reverse detent", what to with throttle two with them, do you have any idea about that. Or do i miss something?
1st, Thank you for such a detailed explanation of the controller commands, as always a excellent tutorial. My problem: Under the Caravan propeller settings you show a joystick button controller assignment for Decrease Propeller 1 Pitch, I have nothing assigned and have looked back several times in the guide and see no reference to that particular function? Have I missed something? What controller should I assign the the function?
Thanks for your video and good advices as usual. I notice than your lights on the Bravo did not light up as usual. I have the same issue ! Any solutions ?
Same issues here, I played around with that spad.ext thingy and got the lights to work but really had no idea what I was doing or how I got them to work...
Mark, what did you do in regards to the TBM 930 that does not have a mixture control. I used the same setup I did in 2020, it appears to work in 2024, but not as good as in 2020.
@@SimHangerFS Someone could make a lot of money writing an online manual for setting up the various commonly used controllers and the most-often used aircraft. One would have expected MS/ASOBO to create such a guide but, I guess I'm pissin' into the wind.
I thought a feature of MSFS2024 You could save your configuration and share them with other users ? Is this the case or not ? I thought we would find people sharing config for various plane / Controller.
It is not possible via the sim but sharing profiles with other simmers via Excel spreadsheet is something I did in the early days of MSFS2020. I am referring to those spreadsheets a lot now for setting up my bindings, axes and sensitivities in MSFS2024.
Mark, your Bravo tutorials have become a "right of passage" for simmers. Thank you!!
Awesome stuff Mark. You're officially the only person I go to when it comes to setting up my Bravo with various aircraft. Your 2020 vids were perfect, so I knew you'd get 2024 spot on. Looking forward to the jet profiles.
Thanks 👍
This is by far the best turorial on setting up the Bravo in MSFS 2024! I really appreciate your effort and determination.
It's a shame that good quality documentation is not done by the manufacturers any more. It's done by enthusiasts like you. Thank you!
I fiddled around quite a bit in the last few days and found out that indeed there are still so many bugs and inconsistencies between planes. I really like the new C208. But as a standard plane, it's probably dumbed down for the console crowd. Therefore the mixture instead of condition axis 😕
Now I understand why I couldn't delete the individual bindings! Thank you!
Glad I could help!
Thanks again Mark, great help. I did some experimenting and noticed that with the toggle switches, assigning "on" and "off" makes the switches react significantly quicker in the sim than with the "set" command, just an observation 😉
Thanks Mark. These bindings tutorials are really useful. I’m looking forward to the one you have planned for the VelocityOne Flight controller which of course has both the vernier and lever controls on the throttle quadrant. I’ve already bound a few types of planes in MSFS 2024 based largely on your MSFS2020 tutorials, but it will be great to have your take on how to do it in MSFS 2024. I am actually quite a fan of the new system because once set up there will be no need to think about the correct profile to use after switching plane types, like we had to do with 2020.
I will be doing this in a few days, great timing with the guide
Good Lord! I need a video explaining how to use this video! Exactly what I was looking for though, THANK YOU!
Thanks a mil for these vids Mark! They're really appreciated!
Thank you, Mark, for yet another top-notch tutorial! Your dedication and the help you’ve provided to the community over time are truly invaluable. We deeply appreciate all that you do ( Pierre from Belgium)
This is SOOOOOOOO helpful! Thank you sir!
That badge when you have multiple inputs bound, cover over the button number! What dev or qa person thought that was the place to put it!! I hope they fix that, but not going to hold my breath.
WOW, THANKS SO MUCH!!!!! GREAT INFO, YOU DA MAN BROTHER.
Glad to help
I’ve experimented with all the reverse throttles and got no where. You’d think ‘throttle full backward’ would do the trick but it doesn’t even work. Thank you sir!
Thank you very very much for your work on this topic. Great guide, great configs and overall perfectly explained.
Fantastic effort mate, you are my go to person for this kind of know how
Thank you very much for this Mark ...Excellent video and thanks very much for putting in all the effort so we don't have to!
Thanks!
Thank you for supporting the channel 👍
Invaluable, thank you - even though I'm sticking with 2020 for the foreseeable future.
Bravo, Well done. Thank You.
I see what you did there 😂
Very Helpfull videos
Mark that was super informative thank you, have you done one for the Alpha.
ooh! .just what i needed mark ... thanks
spent an hour at the weekend setting up my bravo for the a2a comanche and the sim doesn't seem to save my profiles 😒
Cheers Mark.
Thumb up for this helpful video!
Please can you confirm that light system doesen’t work on this Honeycomb Bravo? (Gear led, autopilot led ecc.)
Cheers from Italy
Mark: As always, another very useful instructional video. I was doing fine following along until you got to the Caravan. Your directions upended my plan to just create the same profile and bindings I had for the Caravan in MSFS2020. So, how in the world did you find out about the new commands?!?
I ask because, even though I can "borrow" what you did for the Caravan, and even adapt those for the some of the twin turboprops, now I have no clue on how to set up the TBM's and the PC-12 since they have rather unusual configurations.
Also, have you ever tried to set up the new Cessna 408 Courier? I could never get the condition levers to work with either my Bravo, or even using 2020 keyboard commands assigned to the mixtures. I have no clue if I am doing something wrong, or its another "bug".
Thanks again!
As I said in the video…if you’re looking for logic on the turbo prop it is beyond me. Trial & error with a few tears 😂
@@SimHangerFS OK. Thanks Mark. There are times when I think this whole simulator defies logic.
Thank you,Mark a great video again. It became very clear to me up to two bindings for a twin turbo. What about the "hold throttle reverse trust" and the "throttle reverse detent", what to with throttle two with them, do you have any idea about that. Or do i miss something?
Have not had time yet to experiment with those :)
1st, Thank you for such a detailed explanation of the controller commands, as always a excellent tutorial. My problem: Under the Caravan propeller settings you show a joystick button controller assignment for Decrease Propeller 1 Pitch, I have nothing assigned and have looked back several times in the guide and see no reference to that particular function? Have I missed something? What controller should I assign the the function?
Thanks for your video and good advices as usual. I notice than your lights on the Bravo did not light up as usual. I have the same issue ! Any solutions ?
Same issues here, I played around with that spad.ext thingy and got the lights to work but really had no idea what I was doing or how I got them to work...
Pending an update from Aerosoft/Honeycomb.
@@SimHangerFS Good to hear. The autopilot lights won't come on for me either.
What settings for the DASH-7 4-Prop? Also, is the ATR Twin-Prop the same profile (sort of!) to the G58 Baron twin-prop?
Mark did a separate profile for the ATR back in 2020. It's really good, check it out and apply the same logic to 2024.
How to.setup thé sensivity of thé wheel trim?
Mark, what did you do in regards to the TBM 930 that does not have a mixture control. I used the same setup I did in 2020, it appears to work in 2024, but not as good as in 2020.
@@mikevadnais7722 still experimenting with the TBM
@@SimHangerFS Someone could make a lot of money writing an online manual for setting up the various commonly used controllers and the most-often used aircraft. One would have expected MS/ASOBO to create such a guide but, I guess I'm pissin' into the wind.
Please do a helicopter one for the Warthog Throttle!
I thought a feature of MSFS2024 You could save your configuration and share them with other users ? Is this the case or not ?
I thought we would find people sharing config for various plane / Controller.
@@stephenbull2026 if only that was possible. No not a feature unfortunately
It is not possible via the sim but sharing profiles with other simmers via Excel spreadsheet is something I did in the early days of MSFS2020. I am referring to those spreadsheets a lot now for setting up my bindings, axes and sensitivities in MSFS2024.
Hardware Light still aint working is there comming a update soon?
Is it just me or the lights are not working on the Bravo in 2024?