Hi Haseeb love all your videos and informative shares. Quick question about melting the silicone (hot glue). With the absence of a Hot Glue Gun and a preference for using the Soldering Iron over Hot Air, would you recommend having a dedicated Soldering (as in an older/cheaper one)?
you are right. we can use hot glue gun or we can use RTV flowable silicon OR we can use a soldering iron dedicated for this activity. but much preferred to use hot glue gun
@@HaseebElectronics my machine is running at a perfect speed but still not removing the lint. Please guide is detailed how to adjust spring/blades. Thanks
@@HaseebElectronics yes it is. It's running smoothly. I think it's suction is not working properly. Cause when i purchased it the wind was going inside but now it's coming outside. I don't know if it is a problem 😕
wa alaikum salaam. if the motor spins and it does not remove the lints, it meas there is some gap between the blades and the metallic cover, remove the top cover and inspect the blades, check there are springs behind the cutter blades, tighten the springs to raise up the blades towards the cover sometimes the blades fail to move with motor, due to the cotter shaft of the motor is not properly aligned to the cutter blades pivot. remove the blades and align it again to seat it properly on motor's shaft
Watching bong electronic
I have same problem on my lint machine as a same model but I don’t have skill to fixed like this thank you so much to show how to fixed ❤
Thx for the video. I literally just took it apart and put it back together and it worked. Crazy.
good morning brother 👏 always usfull vdio for all ppl
Assalamualaikum wr wb
Good work brother 👍❤️
Wonderful job dear friend, have a nice day!
best regards
God bless you bhai.
Very nice upload 👌👍
Every video you shered very hardworking brother
Amazing work my brother 😊 give you super 👍
thanks a lot dear brother
Very good sir it's problem is same like my panasonic shaver thank you for sharing your good experience with us
Good Morning & Good Wishes Dear Brother
Your all videos are nice.india
special thanks
I'm very happy find your channel
thanks for sharing video 🌹🌹🌹
it is my pleasure
Good work and beautiful ❤️
Hi Haseeb love all your videos and informative shares. Quick question about melting the silicone (hot glue). With the absence of a Hot Glue Gun and a preference for using the Soldering Iron over Hot Air, would you recommend having a dedicated Soldering (as in an older/cheaper one)?
you are right. we can use hot glue gun or we can use RTV flowable silicon OR we can use a soldering iron dedicated for this activity. but much preferred to use hot glue gun
@@HaseebElectronics Thank you for the response.
it is my pleasure
اسلام وعلیکم ماشاءاللہ ماشاءاللہ
Very informative videos. Thanks 🙏
best regards
@@HaseebElectronics my machine is running at a perfect speed but still not removing the lint. Please guide is detailed how to adjust spring/blades. Thanks
Good job 👌👌👌👌 keep it up
Lk 61 brother 👏👏👏
special thanks and best regards
Salam M Haseeb, can you explain the circuit board and how it charges the battery ? thanks.
OMG.i fixed it and i forgot to explain the circuit. but this time it is not with me. okay we will wait until the next one, if it comes again
@@HaseebElectronics No problem. Thanks.
very well explained sir❤❤💯💯
Thanks and welcome
Very useful information sir thanks
thanks a lot
Good content
best regards
Very nice sir God bless you.
So nice of you
الله يعطيك الف عافية شكرا للمشاركة
Good work👍
Thanks 👍
Lint remover is very useful and effective
Wow what a nice video mashallah
thanks a lot
Good video very useful
Very good repaired. I think a hot glue gun would be a good invest. 😊
yes sir you are right.
Sir please make a video about air gap of pulse transformer
sure i will try to do it
bro plz help . the blade cant remove lint from clothes plz give me salotuion i buy it today .but its cant work
What is its battery backup
i have no clear idea for its backup. as i never used this product. i just shared the repairing method
please
Very very useful
thanks a lot
Machine is working correctly but it can't cut anything...
What's the problem?
please check its blade, is it installed properly?
@@HaseebElectronics yes it is.
It's running smoothly.
I think it's suction is not working properly.
Cause when i purchased it the wind was going inside but now it's coming outside.
I don't know if it is a problem 😕
Good 👍
Salam..my lint remover is working but not removing lint ..I dnt know what happened to it..as it was working properly before.TIA
wa alaikum salaam. if the motor spins and it does not remove the lints, it meas there is some gap between the blades and the metallic cover,
remove the top cover and inspect the blades, check there are springs behind the cutter blades, tighten the springs to raise up the blades towards the cover
sometimes the blades fail to move with motor, due to the cotter shaft of the motor is not properly aligned to the cutter blades pivot.
remove the blades and align it again to seat it properly on motor's shaft
@@HaseebElectronics tnx alot.Allah bless u
Always excellent thanks for sharing
So nice of you
I found my blades not working it turns on but makes a horrible noise 😒
when blades are damaged, it touches the outer body, so that it creates noisy sound
I get a blue light and a green light changed the blade it will not charge
Lint removers pahle work karti thi ab lint nahi nikalti hai what should I do
please check its blade and head, and inspect the gap between head and blade
Wow a nice video
thanks a lot
i aint doing allat 🔥🔥💯💯
👍
best regards and special thanks
Goals! Thank you
You're so welcome!
Good
thanks a lot
38 like very 8