Hi Robert, in this case we used a tool we built ourselves. We screwed a small metal part into the brake cable and attached an inner shift cable. There are many professional tools for the job though ;). For example have a look at this video: th-cam.com/video/FUFH3rlkB4I/w-d-xo.html
I am gently writing to you that you did not follow the manual while applying carbon grip on the surface of seat post. BTW, I love this bike and your video. Thank you.
1st time watching this channel...... and it’s beautifully tranquil.....found my new sleeping video 😁😍 what you weighing in..... me or pounds and ounces on your table scales 🤔
Great frame, but i get really angry about the cockpit, ordinary steerertube and give consumer possibility to set there own stem and bar choice is the way to go.
I have not long ago built the 2020 version of this, without the one piece stem and bars (so I also don't have to have that red top , yuck). It is awesome and I'll try to put up my (not as pretty) video of that soon.
Can you please tell us why the video starts with the hydraulic lines already run and the calipers attached? Is this an indication of how hard it is to route these hoses? Does it come this way out-of-the-box?
With the BMC SLR01 it was very easy to lay the cables, because they mostly run in a channel, there is also a channel in the stem / handlebar, no need for special tools. It is a little bit difficult run the cables thru the headset, but this is the same with all fully integrated cockpits, it is nice to have a second person helping. We usually start with the assembly of the brakes, headset and stem, then we take the frame out of the mounting stand and film the details for the start scene.
When the Tour de France starts August 29th we will have the Team Trek Segafredo, Trek Emonda built for Mads Pedersen (rainbow stripes paint job) online
The DUB Design itself is ok. It uses a displacement preload system which is ok. The Problem is the misalignement of the Frame itself and the fact that you should be shot to sell your Customer a 30/29mm axle in a PF41 frame. A topic for BMC. Not for SRAM. I you want a SRAM group watch out for a 46mm BB hole or that T47 Standard
All else equal, the ridiculous amount of engineering in this bike ($$$$$) will not get a rider over a hill faster than my 1999 Cannondale Saeco 9 speed.
on August 29th we present the Emonda which was built by Team Trek Segafredo for Mads Pedersen the current world champion. It is a very cool bike with a very special paint job just for Mads Pedersen
hello.. I am looking to build the same back. I have the Frame but need all the parts. any links, suggestions etc on where to purchase affordable parts would be greatly appreciated. instagram- thepreeview
My favorite road bike: BMC.
The perfect TeamMachine.
When my SLR02 Grows up, it wants to be an SLR01
I still have and ride the 2013 SLR01 and love it. Lusting for this one though
I love how clean it looks without all the cables. Beautiful bike.
Got it with DA Di2
Lovely bike to ride ✌️
BMC has a good thing going for a clean looking bike.
Very nice build!
(the bar tape was wrapped in different directions)
yeah but it is not a problem
Congratulations on the video !
BMC is life !
Wondering why post-rock or instrumental rock song is a perfect match for bike build video! Good job!
But my two cents: please use gloves while applying all lubes and grease haha.
Newbie to YT. Instructional posts are so helpful and informative. Much appreciated!😀🤣
I like how the crank spins aren't cut out.
This one at least does a couple of turns, unlike the Tarmac SL7.
Estupendo Ensamblaje, saludos Alfredo desde Montevideo Uruguay.
The while video I thought I was warching Gee Milner! Even the same type of music... Cool bile tho!
Thanks👍 But only with us you get the actual weight of all the parts ⚖️🧐😀
road bike channel haha yes thats true! And its nice to see how you transfer the measurements onto the new bike
Great video, getting the same bike built as we speak. Can’t wait to ride it
Great you like it! Have fun on your new BMC! :)
One day I'll own a torque wrench that makes a beep, you watch
Ian Richardson I believe in you!
Go for it!!
The orange gloves are the key
:D :D :D
Compare that cockpit assembly process vs that of the Wilier SLR....mechanics sure loves BMC’s design
Gorgeous
Lovely but doesn’t quite look right without deeper carbon wheels.
because it is supposed to "climb" only?
Neill Gowans this is dt swiss new mt. chasseral wheelset and it's crazy light
All this build to end up with a flat tire 5km into your first ride (thank you Vittoria ahaha)
A dream machine!
a treammachine
Thing of beauty! Great vid....😚
I love this bike. Will make an awesome used bike score in 3 years for $7k lol
When a torque wrench cost more than my current bike, I know I am living in a crazy cycling world.
Depends on the price of your bike! A Gedore ET2SA E-Torc costs about €6500,-
Perfect Video!
Wow I like that bike
Beautiful 😍😍😍
BMC una joya
so even a pretty top spec build like this one comes in above the UCI weight limit once you add the pedals?
Beautiful bike! Is it possible to remove spacers without cutting the fork?
HI, do you put a shift cable through the brake cables to get it through the bar? And how do you fix the end? BR
Hi Robert, in this case we used a tool we built ourselves. We screwed a small metal part into the brake cable and attached an inner shift cable. There are many professional tools for the job though ;). For example have a look at this video: th-cam.com/video/FUFH3rlkB4I/w-d-xo.html
Your videos are great when you're gonna do one of the BMC Timemachine.
I am gently writing to you that you did not follow the manual while applying carbon grip on the surface of seat post. BTW, I love this bike and your video. Thank you.
Great video. What torque wrench did you use?
It seems Topeak D-TORQ WRENCH DX.
Superb video and thank you.
How many hours did it take you to complete the build.
Great to see each component weighed.
We are talking about 4-5 hours of building time
Muy bueno el armado hermosa maquina
I wish you are better and better very nice 👍
masterpiece!
Top video of a tream bike - thank you! Are you work together with a bike dealer, the build looks like a proffessional wheel mechanic ;-)
I have the same bike with sram, what do you use to fit the bb, grease or dry fit
What bar tape it that? Is it branded by some manufacturer or it's BMC house made? Tnx!
1st time watching this channel...... and it’s beautifully tranquil.....found my new sleeping video 😁😍 what you weighing in..... me or pounds and ounces on your table scales 🤔
Thx a lot. We are weighing in metric grams :-)
Estas maquinas son formula 1
Is is delivered without any spacer?
Spettacolare 👍
top top top top top parabéns...
Great frame, but i get really angry about the cockpit, ordinary steerertube and give consumer possibility to set there own stem and bar choice is the way to go.
Per Rödjemark this is an ordinary 1 1/8 steertube and you can fit every normal stem to it
I have not long ago built the 2020 version of this, without the one piece stem and bars (so I also don't have to have that red top , yuck). It is awesome and I'll try to put up my (not as pretty) video of that soon.
Hallo, welche Grösse hat das Bike?
Do the same, but with guitars :)
Si pudiera comprar una seria el mas feliz del mundo
In welcher Werkstatt habt ihr das Rad aufbauen lassen? :)
Hi Alexander, es ist die Dreambuild Werkstatt in unserer Redaktion ;)...
that's a dream bike alright, but the 6.8 kg weight with no pedals is a bit of a cop-out
Can you please tell us why the video starts with the hydraulic lines already run and the calipers attached? Is this an indication of how hard it is to route these hoses? Does it come this way out-of-the-box?
With the BMC SLR01 it was very easy to lay the cables, because they mostly run in a channel, there is also a channel in the stem / handlebar, no need for special tools. It is a little bit difficult run the cables thru the headset, but this is the same with all fully integrated cockpits, it is nice to have a second person helping. We usually start with the assembly of the brakes, headset and stem, then we take the frame out of the mounting stand and film the details for the start scene.
Can you do a factor 02 vam with black inc components
bmc bmw :-)
碟刹6.83kg，好车！(๑˃̵ᴗ˂̵)👍
I want to know the brand model of the pump used?? Nice chuck!
we use a Silca pump, www.silca.cc
What kind of bar tape is it?
What is the frame size on that build?
Looks like a 56 to me
why is such a modern bike not ridden with tubeless latex or tubolitos?
Waiting for new upload!
Great video! How much time does it actually take to build the bike?
a skilled mechanic will need about 3-5 hours, when we take a video it takes a little bit longer.
what brand tube are you using in video?
What was the actuall weight with pedals, +7kg ?
Baik top a melhor eu tenho uma não deixa desejar em terreno nenhum máquina uma nave fugente
What is the model of the floor pump? Does anyone know?
It's definitely a Silca floor pump. I have their SuperPista Floor Pump and it's worth every penny.
Could you share what brand of gloves you're using?
Yes sure. The gloves are called Tiger Grip gloves. You can get them on Amazon
@@roadbikechannel Thank you.
What bar tape is going on?
What's the green grease at 3:10? Anyone know?
👏🏻👏🏻👏🏻👏🏻👏🏻
Notice how far the actual weight of the frame is over officially claimed: 980g /w bb vs 820g.
When the emonda slr?
Buytl tubes! come on spend some cash on latex!!
Tubes ;(
Where is the Di2 charging port supposed to go?
chrisytofa in the barend
@@ianiscaratti4924 at the 35 second mark did i see a cut out on the down tube also? Almost under the aero cage
@@chrisytofa yes, that's where the di2 junction is placed on Shimano groupset.
👍🏿
Que tegnologia tienen
Not sold with the red cockpit
Se Deus mi der condições eu compro outra baik dessa top das top
TREK Emonda 2021 please :)
When the Tour de France starts August 29th we will have the Team Trek Segafredo, Trek Emonda built for Mads Pedersen (rainbow stripes paint job) online
@@roadbikechannel wonderfull thanks :)
5:20 another BB spin fail. Badly designed BB by SRAM should be forbidden.
The DUB Design itself is ok. It uses a displacement preload system which is ok. The Problem is the misalignement of the Frame itself and the fact that you should be shot to sell your Customer a 30/29mm axle in a PF41 frame. A topic for BMC. Not for SRAM. I you want a SRAM group watch out for a 46mm BB hole or that T47 Standard
But of you are wrong and shouldn’t listen too much to what Hambini has to say.
@@jochem1986 I didn't realize SRAM uses a different standard now. GXP is bad though.
it should've said "includes payed promotion" at the beginning
size?
54
@@roadbikechannel hi you selling this?
How much is it?
A lot!
you need to ask, you can't afford it;)
Nice... but in my dream build, the groupset begins with a “C”, not an “S”... and the tyres are tubular.
All else equal, the ridiculous amount of engineering in this bike ($$$$$) will not get a rider over a hill faster than my 1999 Cannondale Saeco 9 speed.
6.83kg🤔
God..the music is torture....
TREK EMONDA PLS. thank you
on August 29th we present the Emonda which was built by Team Trek Segafredo for Mads Pedersen the current world champion. It is a very cool bike with a very special paint job just for Mads Pedersen
😂
Not Shi please
hello.. I am looking to build the same back. I have the Frame but need all the parts. any links, suggestions etc on where to purchase affordable parts would be greatly appreciated. instagram- thepreeview
Ali-Express or used ones on e-bay or local shops I guess
Esse guidom negativo, não é legal.
BMC= bullsh't manufactured crap?
because friend told me it stands for biased marketing crap
1xXNimrodXx1 bicycle manufacuring company
your friends are even less funny than you
It stands for you can't afford it.