Wow man I loved this video! Nice looking Silverado shell. I have the same exact tires and I find them really nice for jumping (more padded) and they do fairly well over most of the surfaces. Btw is your truck running the wide typhon arms? Great video man, inspiring always 😊
@@phillybrc sorry to ask, between the badlands and the trencher (both non belted) which ones you find better for bashing? Thanks a lot, I’ll be widening my granite soon too :D
Depends on the terrain really, tough call. The only time trenchers don t work so well is wet grass. I even run trenchers on my 2wd Slash. If I had to choose for my first set of Prolines for the Granite, I would choose the MX Badlands. I ve been running unbelted. Converted the Granite to 17 mm with Typhon parts. Do you run either of these?
@@BeforeRobots-ch7gl Honestly, I cannot see you being disappointed, air control is top-notch, great glue job. I DID vent them though! And I put a piece of gorilla glue over the holes on the inside of the rims, this way water will exit the vent holes…if you didn t know that already.
@@phillybrc Yeah, I’ve tried a few setups for the 100a esc and stock ends up best. I just started trying a new setup. 2800kv Spektrum motor for the Losi bog hog. (Jennie’s RC has them) Paired with an 18t pinion, it absolutely rips on 3s. Higher top end than stock, motor stays cool as hell, and it’s 4s capable. Only problem is, I think it cooked the 100a esc, which has actually lasted forever. So I’m trying the 130a 4s esc. Hopefully it stays cooler. 3s is more than enough, but I can also try 4s.
This was gonna be my first RC when I got back into it after many years. I ended up grabbing a kraton v5 and while I don't regret it, I still might end up grabbing one. But now that I've seen this Raarlo terminator that everyone is raving about, I don't know. Need a second job and more spare time. 😆
Omg, i agree! Need more time! That Rllarlo looks cool but how is parts availibility in your area? Can t go wrong with the 3s line, so readily available and I like that. Thanx!!
This is by far my favorite basher ever! It’s a tank! I? I have a set of belted trenchers for my granite and they are terrible with traction in pretty much any environment. They just spin and spin on me. I guess I gotta get a set of unbelted.
So, I rarely run punch on max setting to avoid breakages. I usually lighten my brake setting, I hate the heavy nosedives when i m trying to correct a jump….i d rather hit brake a second time if more is needed. This comes with some driving experience and figuring out your preferences. Does that make sense?
Nice rip, nice rig! I miss tearing around, I can set up a cool jump but I miss the dirt and just ripping around. That rock slam made me jump back 😆 Some serious blunt force trauma right to the FACE lol Makes me want to play w/ my plastic thing again. How do you not have snow? Aren't you in Canada??
These trucks are fun man, and just easy, plus they are cheaper than the animals you rip! I recorded this few months ago, but we actually have had a mild winter and barely have any snow…totally strange man. I appreciate uou stoppin by
My 1st RC I got about 3 years ago. Ain't turned back since... I'm hooked.
Totally man, happens to the best of us!!! So much fun dude! Thanx for watchin
fantastic place you found there,granite is flipping awesome 👌 brilliant rip 👌👍😀
Thanx alot. Awesome Rc!
She is a ripper bro for sure, tough little truck too hitting that Rick like it did and still kept on goin, 💪💪💪
For sure brother, it can take abuse, especially from my kids! I still like the 3s line for fartin’ around. Hope you re well
@phillybrc yeah u need littles to.rip about, im good thanks bro 🤙😎
I bought one yesterday. I’m hooked after one run! Tire upgrade is first on the list
Right on! I used to mess with amazon or aliexpress tires but you really do get what you pay for. Im def a Proline guy. Thanx for watchin
Love it and great location ❤
Welland-ah! It was a beautiful day! Thanx
love it, the granite is awesome
keep up the great work
Thanx alot
Wow man I loved this video! Nice looking Silverado shell. I have the same exact tires and I find them really nice for jumping (more padded) and they do fairly well over most of the surfaces. Btw is your truck running the wide typhon arms? Great video man, inspiring always 😊
Thanx so much. Ya, love these these tires. I had crazy traction and air control. Yes, it is widened, a huge MUST upgrade in my opinion. 🤜🤛
@@phillybrc sorry to ask, between the badlands and the trencher (both non belted) which ones you find better for bashing? Thanks a lot, I’ll be widening my granite soon too :D
best bash and spot champ🤩💪
keep going champ🏆🎖
Thanx my dude, it s a ripper
Love the look of that👌🏻
Nice rip man .... she is tearing up that dirt 🔥🔥
She s no joke lol. Thanks my dude.
Great Job Phil! Which do you prefer, the badlands or the trenchers? Also are you running 17mm for hex or still on the stock ones?
Depends on the terrain really, tough call. The only time trenchers don t work so well is wet grass. I even run trenchers on my 2wd Slash. If I had to choose for my first set of Prolines for the Granite, I would choose the MX Badlands. I ve been running unbelted. Converted the Granite to 17 mm with Typhon parts. Do you run either of these?
Not yet. Going to convert to 17mm and pick up "some" Pro-line wheels and tires. Probably take your suggestion and start with the Badlands. @@phillybrc
@@BeforeRobots-ch7gl Honestly, I cannot see you being disappointed, air control is top-notch, great glue job. I DID vent them though! And I put a piece of gorilla glue over the holes on the inside of the rims, this way water will exit the vent holes…if you didn t know that already.
Awesome! I really like that Silverado body. Might have to get one for my son's Granite. I love how tough these little trucks are 👍
Thanx Aaron, ya that body does look cool, I m happy the turnout! I don t get tired of these little rippers!
Great video brother it’s good to see you getting out and bashing 💪🏻👊🏻😎
Thanx bro, I’m hoping my son will find interest in RC again so I can get out more! I still love bashing! Hope you re good!
She is ripping! Great bash. What are you running? Stock motor & pinion?
Thanx Tyrell! Bone stock, just great traction. It sure is rippin’ and lots of fun. Thanx for watchin and I hope you re well man.
@@phillybrc Yeah, I’ve tried a few setups for the 100a esc and stock ends up best. I just started trying a new setup. 2800kv Spektrum motor for the Losi bog hog. (Jennie’s RC has them) Paired with an 18t pinion, it absolutely rips on 3s. Higher top end than stock, motor stays cool as hell, and it’s 4s capable. Only problem is, I think it cooked the 100a esc, which has actually lasted forever. So I’m trying the 130a 4s esc. Hopefully it stays cooler. 3s is more than enough, but I can also try 4s.
This was gonna be my first RC when I got back into it after many years. I ended up grabbing a kraton v5 and while I don't regret it, I still might end up grabbing one. But now that I've seen this Raarlo terminator that everyone is raving about, I don't know. Need a second job and more spare time. 😆
Omg, i agree! Need more time! That Rllarlo looks cool but how is parts availibility in your area? Can t go wrong with the 3s line, so readily available and I like that. Thanx!!
This is by far my favorite basher ever! It’s a tank! I? I have a set of belted trenchers for my granite and they are terrible with traction in pretty much any environment. They just spin and spin on me. I guess I gotta get a set of unbelted.
Ya, it s a really fun rig! Im shocked, I would ve thought the the traction would be similar. Thanks for watching!
My granite blx is in the mail but is it better than my 4x4 stampede???
Absolutely.
Being a NOOB, I'm curious, do you tweak your punch and brake settings or run them factory?
So, I rarely run punch on max setting to avoid breakages. I usually lighten my brake setting, I hate the heavy nosedives when i m trying to correct a jump….i d rather hit brake a second time if more is needed. This comes with some driving experience and figuring out your preferences. Does that make sense?
makes sense to me! @@phillybrc
That thing is a little ripper ❤ I never broke any driveshafts on arrma 3s before
Really?! Wow. Ya it def happens to me.
@@phillybrc I heard it happens but not once
@@RevelationRC You re a good driver, that ll do it
Nice rip, nice rig! I miss tearing around, I can set up a cool jump but I miss the dirt and just ripping around. That rock slam made me jump back 😆 Some serious blunt force trauma right to the FACE lol Makes me want to play w/ my plastic thing again. How do you not have snow? Aren't you in Canada??
These trucks are fun man, and just easy, plus they are cheaper than the animals you rip! I recorded this few months ago, but we actually have had a mild winter and barely have any snow…totally strange man. I appreciate uou stoppin by
Not that many people customize their granite lol looks awesome
Why the heck not?! Right? Haha. I like look of it too. Thanks!
@@phillybrc I’m not sure. I’ve been looking for inspiration on YT and you’re one of the few I found 😂
Cool. Proline makes great bodies. Most traxxas stampede aftermarket bodies will fit granite too