First off where you said there's the problem yeah the problem is it didn't even have a bolt to fasten down the clutch because it wasnt suppose to just come off like that after you took those pieces out 😂
The part I needed to see is: You have a little Spring, a little Tube and then the larger lipped cylinder. Which goes in first? The spring? The tube or?? My clutch doesn't disengage. Can you tell me the orientation of those 3 pieces? Someone else had it all removed. Any help will be greatly appreciated. Tia.
Good job on your first video, I'm thinking about starting a channel myself because I work on and build everything-literally, I see a lot of people just asked a bunch of questions without doing any other research on other videos, that could get a little annoying I would think, I enjoy helping people but man do a little footwork yourself, I subscribe to you to help you get started and best of luck to you, maybe in the future I might want to pick your brain a little bit if have a question about starting my own channel if you wouldn't mind answering them, I may run into challenges you may have run into, I've done a lot of research already on starting a channel but I'm sure there's stuff I haven't came across yet, peace
My son has 125cc similar bike,, sometimes it kicks and feels compression and other times Kick-start just feels like it's slipping with nothing felt and no rotation,,, would you advise Kick-start shaft or clutch????
Thanks for sharing this thumb 👍 up video, 11:40 I thought 🤔 clutch should not have to be engaged to gears as the engine is not highly removing. It is confusing because I am not well familiar with these things ✋🌹
So u didn't replace the gasket? I need to replace the clutch cover on my coolster 125 it's busted and leaking all the oil out really bad. I have a new cover but it didn't come with a gasket or new kicker seal. Any idea where I can get those items?
The 4 screws on the clutch outer cover, mine are tight as hell and stripped one when I try remove them.. How can I get them out they feel like butter when I put a screw driver in them?! Giving me a right headache.. Cheers pal
@@disasterwarehouse8363 i ordered an impact driver to attempt this, still didnt work so i grabbed an angle grinder and made a slot myself and ordered a whole new clutch set
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
First off where you said there's the problem yeah the problem is it didn't even have a bolt to fasten down the clutch because it wasnt suppose to just come off like that after you took those pieces out 😂
The part I needed to see is: You have a little Spring, a little Tube and then the larger lipped cylinder. Which goes in first? The spring? The tube or?? My clutch doesn't disengage. Can you tell me the orientation of those 3 pieces?
Someone else had it all removed. Any help will be greatly appreciated. Tia.
large lipped cylinder, spring and then little cylinder around spring. i assume you found out already
@@schpoingle bro u dont know how much this saved me 😂
I fit my old clutch in and it started but after I shut it off it slipped and it wasn’t engaging again is there anything I could do?
Good job on your first video, I'm thinking about starting a channel myself because I work on and build everything-literally, I see a lot of people just asked a bunch of questions without doing any other research on other videos, that could get a little annoying I would think, I enjoy helping people but man do a little footwork yourself, I subscribe to you to help you get started and best of luck to you, maybe in the future I might want to pick your brain a little bit if have a question about starting my own channel if you wouldn't mind answering them, I may run into challenges you may have run into, I've done a lot of research already on starting a channel but I'm sure there's stuff I haven't came across yet, peace
My son has 125cc similar bike,, sometimes it kicks and feels compression and other times Kick-start just feels like it's slipping with nothing felt and no rotation,,, would you advise Kick-start shaft or clutch????
make sure your clutch cable is adjusted properly, on chinese bikes if you pull the clutch in the kick starter wont engage
whats the name of the bike, cheers!
Thanks for sharing this thumb 👍 up video, 11:40 I thought 🤔 clutch should not have to be engaged to gears as the engine is not highly removing. It is confusing because I am not well familiar with these things ✋🌹
11:33
So u didn't replace the gasket? I need to replace the clutch cover on my coolster 125 it's busted and leaking all the oil out really bad. I have a new cover but it didn't come with a gasket or new kicker seal. Any idea where I can get those items?
Yes my 125cc is manual shift. I would like to find out is it a simple swap of clutches to a automatic one?
I have exactly the same engine with the same problems
What's the name of that thing you used to tighten the clutch with the drill when you said you weren't a fan of hammer and screwdrive
I need to know to
The 4 screws on the clutch outer cover, mine are tight as hell and stripped one when I try remove them.. How can I get them out they feel like butter when I put a screw driver in them?! Giving me a right headache.. Cheers pal
Try a hand impact screwdriver.
@@thelagmeister thats exactly what worked in the end.. hammer and a impact driver. Cheers!
@@disasterwarehouse8363 i ordered an impact driver to attempt this, still didnt work so i grabbed an angle grinder and made a slot myself and ordered a whole new clutch set
I cant get the lock but to come loose. Even with the lock nut tool I cant get a good grip on the basket. 😡
Thanks for the video
What happens if you don't fold the tabs in?
Where does the clutch cable go on these? trying to throw that engine on my old frame but can’t find the clutch arm
Right on top the right side of the the motor I believe
This video acctually helped me a lot Thankyou
What kind of oil and howmuch
Nice work! Great video helped me a lot! Thank you✌️
Thanks helped me out a lot
nice thanks
do we need to soak the clutch in oil before installing?
4:40
I would definitely soak the clutch.
What did you do with that little spring at the end
He just putted that baack there. My 110cc pitbike clutch is also broken gotta check this video couple times to remember and learn some
@@purgefinx what engine brand do u have i need to replace my clutch could do with some help
your hands block everything smh
this happend to me only one bolt was left
Do you have the link for the full clutch?
Locking washer
Hello mate what’s that left sprocket thing called. Mines broken.
I would guess it would be called the drive sprocket idk if that's what it's called but it drives the transmission
It’s not a great video if you got your fat fingers in the way where does the spring go
This sukd. Didn't explain anything
Do you have the link for the full clutch?