Hydroforming Cube with a Pressure Washer

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 มิ.ย. 2024
  • How to use DIY Hydroforming to inflate steel cubes from flat to 3D. The first experiment attempts to mimic an expanding paper origami cube, but proved to be much trickier to achieve using sheet steel due to the large force required to unfold correctly. I may try this again, inspired by how the MythBusters managed to make an inflatable cube/balloon from sheets of lead.
    More projects: www.connorholland.com/
    Hydroforming Tutorial: • DIY Hydroforming Tutorial
    Inflating Metal - Hydroforming Experiments Compilation: • Inflating Metal - Hydr...
    Hydroforming a Futuristic Bowl and Lamp: • Hydroforming a Futuris...
    Hydroforming an Inflated Steel Vase - • Hydroforming an Inflat...
    Hydroforming the steel Lilo - • Hydroforming the steel...
    00:00 Sheet steel origami inflatable cube
    1:38 How to weld a cube from sheet steel
    2:26 Hydroforming a steel cube
    4:46 Spherical Cube
    #hydroforming #metalworking #cube
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 77

  • @jorgliedtke38
    @jorgliedtke38 5 หลายเดือนก่อน +47

    It's more of a stress test for the welds.

  • @JohnJones-oy3md
    @JohnJones-oy3md 7 หลายเดือนก่อน +28

    4:46 - Most. Painful. Beach ball. Ever.

    • @xploration1437
      @xploration1437 7 หลายเดือนก่อน +2

      Soccer

    • @PeterLawton
      @PeterLawton 3 หลายเดือนก่อน +1

      *dodgeball 🤣

  • @gcl2783
    @gcl2783 7 หลายเดือนก่อน +28

    Wasn't planning on watching an awesome hydroforming video today, but here I am watching an awesome hydroforming video.

  • @Lockbar
    @Lockbar 4 หลายเดือนก่อน +8

    Thats a very uncomfortable pillow.

  • @alanshelby5980
    @alanshelby5980 4 หลายเดือนก่อน +2

    Being from the old school of oxy acetylene welding You might try that instead of tig welding . 2 U-shape bent parts to make the cube with 60 % less seams

  • @humdinger7275
    @humdinger7275 4 หลายเดือนก่อน +1

    Impressed with that hose and those fittings

  • @MajorDrinkins
    @MajorDrinkins 4 หลายเดือนก่อน

    Great stress test. You can really improve the skill by doing this kind of work. Great training.

  • @JonMurray
    @JonMurray 5 หลายเดือนก่อน +1

    That cube was extremely satisfying. Awesome video as always mate.

  • @jamespayne8781
    @jamespayne8781 3 หลายเดือนก่อน

    One would suppose that mechanical stress begins to affect the welds as the angles change during inflation.

  • @GWAYGWAY1
    @GWAYGWAY1 4 หลายเดือนก่อน +1

    I made two stroke expansion chambers like that, but the welds take a real pounding.😊

  • @deucedeuce1572
    @deucedeuce1572 4 หลายเดือนก่อน +2

    Even if I know it would never work... I would have loved to see those first one's unfold into cubes. I wonder if that's even possible. Like, is there any kind of weld that can withstand that level of deformation?

    • @ConnorHolland
      @ConnorHolland  4 หลายเดือนก่อน +4

      I do think it will work if I made it on a larger scale, as the steel will be more flexible. The unfolding cube design works when made from paper or metal foil, the Mythbusters even made a lead balloon the same way

  • @Enjoymentboy
    @Enjoymentboy 4 หลายเดือนก่อน +1

    Interesting. Now do a tesseract.

  • @logancook8983
    @logancook8983 4 หลายเดือนก่อน +1

    would should try annealing the metal at different points in the forming

  • @ovalwingnut
    @ovalwingnut 4 หลายเดือนก่อน

    I've been taught that you can't put a round peg in a square hole. Your video just blew the WATER out of that theory Hey wait! It sill doesn't?.... We kid because we love! Thank you for the video. The effect is memorizing. Cheers from So.CA.USA 2nd House On the Left

  • @jiggasvr6
    @jiggasvr6 7 หลายเดือนก่อน +8

    Hi, can i ask what gauge plate are you using here , and what method are you using to weld the edges together? ...Thank you for the fascinating content...

    • @ConnorHolland
      @ConnorHolland  7 หลายเดือนก่อน +6

      I'm using 1mm thick mild steel, welded with TIG

  • @grahamjones1446
    @grahamjones1446 7 หลายเดือนก่อน +3

    It's like a steel LIPO failure without flame's 😂

  • @pef1960
    @pef1960 4 หลายเดือนก่อน +4

    Well, that was a bust...

  • @Siberian81
    @Siberian81 7 หลายเดือนก่อน +2

    Symbiosis of square and ball. I wonder which shape can withstand vacuum pressure? 👍

    • @2k7u
      @2k7u 5 หลายเดือนก่อน

      ball
      also square + ball squall
      😎

  • @firstsurugi5250
    @firstsurugi5250 4 หลายเดือนก่อน +1

    Now paint it gold and put some question marks on it.

  • @KinneKitsune
    @KinneKitsune 4 หลายเดือนก่อน

    Love the lead balloon fold

    • @ConnorHolland
      @ConnorHolland  3 หลายเดือนก่อน

      That was my inspiration, a larger one should work, just like Adam & Jamie's one

  • @xploration1437
    @xploration1437 7 หลายเดือนก่อน +3

    Please make more videos.

  • @SufiRepublic
    @SufiRepublic หลายเดือนก่อน

    Nice video, could you please tell the pressure produced by the pump, and tge sheet metal thickness? We would be very thankful

    • @ConnorHolland
      @ConnorHolland  หลายเดือนก่อน

      90 bar pressure washer and 1mm thick mild steel

  • @timberframe4646
    @timberframe4646 7 หลายเดือนก่อน +1

    Nice!

  • @ClipComment
    @ClipComment 5 หลายเดือนก่อน

    Было бы интересно узнать как изменится прочность швов если сваривать лазером?

  • @wolfgangweiler3729
    @wolfgangweiler3729 4 หลายเดือนก่อน

    Ohne lange Ärmel viel Spaß beim Sonnenbrand, ohne UV Schutz!

  • @3Mwalker
    @3Mwalker 4 หลายเดือนก่อน

    Brilliant

  • @lexvelema5576
    @lexvelema5576 7 หลายเดือนก่อน +1

    Any tips on how to connect the hose? I welded the nozzle but the tube melted so i had to cut it of

    • @ConnorHolland
      @ConnorHolland  7 หลายเดือนก่อน +3

      I think I welded one tack at a time at low amps with TIG, with a wet cloth around the hose, and cooling it down after every tack

    • @lexvelema5576
      @lexvelema5576 7 หลายเดือนก่อน +1

      @@ConnorHolland thanks hopefully it also works with 2 mm steel

    • @ConnorHolland
      @ConnorHolland  7 หลายเดือนก่อน +3

      @@lexvelema5576 Yes I think 2mm will work fine

  • @rubberducki0406
    @rubberducki0406 4 หลายเดือนก่อน +1

    What is the purpose of this?

  • @2k7u
    @2k7u 5 หลายเดือนก่อน

    metal cube pillow is my favorite

  • @seabassmastermatt80
    @seabassmastermatt80 7 หลายเดือนก่อน +2

    Shame about experiment No1 man. The pop was potentially epic!! Exp No2 a ball with corners it is then.

    • @ConnorHolland
      @ConnorHolland  7 หลายเดือนก่อน +1

      It was close to working, just need to make some changes and try it again

  • @IliadDreyfus-js9oe
    @IliadDreyfus-js9oe หลายเดือนก่อน

    Those aren't welds, you didn't use filler metal

  • @UNIVEGAMETALLICA
    @UNIVEGAMETALLICA 4 หลายเดือนก่อน

    Too much boom means too much air.
    This only properly works if you remove all the air.
    Air compresses and water doesnt.

  • @jonathanshaw8868
    @jonathanshaw8868 4 หลายเดือนก่อน

    Now do it with compressed air

  • @ANLWhip1
    @ANLWhip1 4 หลายเดือนก่อน

    Now test it with a vacuum

  • @mcseforsale
    @mcseforsale 4 หลายเดือนก่อน

    Final exam at TIG welding school!

  • @stomis2346
    @stomis2346 4 หลายเดือนก่อน

    Put filler rod in your welds and it wouldnt fail like that...

  • @makaylabuckman7911
    @makaylabuckman7911 6 หลายเดือนก่อน

    Was it fun playing with that and spinning it?😊 I mean did I have a good balance...

    • @ConnorHolland
      @ConnorHolland  6 หลายเดือนก่อน +1

      Yes it has a satisfying perfect balance while spinning

  • @terryatpi
    @terryatpi 4 หลายเดือนก่อน

    It’s how dirt bike exhaust are made ?

  • @Pikulev_Evgeniy
    @Pikulev_Evgeniy 4 หลายเดือนก่อน

    Есть какая то практическая польза от этих опытов?

  • @ChrisWMF
    @ChrisWMF 6 หลายเดือนก่อน

    Try a dodecahedron

  • @DanielLCarrier
    @DanielLCarrier 4 หลายเดือนก่อน

    Now do a tetrahedron.

    • @ConnorHolland
      @ConnorHolland  4 หลายเดือนก่อน

      Tetrahedron: th-cam.com/video/Xt7KNbBcrqo/w-d-xo.html

  • @robotnikkkk001
    @robotnikkkk001 4 หลายเดือนก่อน

    ....OK,THIS *WAS* ARGON WELDING INDEED OR KIND OF THAT SO I GUESS THIS WAS THE BEST OF WHAT WAS POSSIBLE
    ............STILL KIND OF SAD THAT PLAN A DIDNT WORK THIS TIME

  • @granofon
    @granofon 7 หลายเดือนก่อน

    Металл 2.5 мм аозможно надуть?

    • @ConnorHolland
      @ConnorHolland  7 หลายเดือนก่อน

      Yes 2.5mm will work

  • @contessa.adella
    @contessa.adella 4 หลายเดือนก่อน

    Why?

    • @ConnorHolland
      @ConnorHolland  4 หลายเดือนก่อน

      Because I wanted to know what would happen

  • @thomasmica2856
    @thomasmica2856 5 หลายเดือนก่อน

    Сфера вписанная в куб

  • @djwindkind
    @djwindkind 7 หลายเดือนก่อน

    Noice!

  • @6B8RX
    @6B8RX 7 หลายเดือนก่อน +1

    It's a Borg cube after bean burrito night!

  • @josemanon6295
    @josemanon6295 4 หลายเดือนก่อน

    Funny

  • @SoylentGamer
    @SoylentGamer 3 หลายเดือนก่อน

    These videos scare me, injection wounds are really horrible.

  • @copescale9599
    @copescale9599 4 หลายเดือนก่อน

    looks like a Samsung battery

  • @CRAZOR6
    @CRAZOR6 4 หลายเดือนก่อน

    Not a cube.

  • @ZappyOh
    @ZappyOh 7 หลายเดือนก่อน +1

    Why?

    • @ConnorHolland
      @ConnorHolland  7 หลายเดือนก่อน +9

      To see what would happen, is that not why you are here also?

    • @xploration1437
      @xploration1437 7 หลายเดือนก่อน +2

      Somebody hates learning…

    • @user-dv1rg7oq5r
      @user-dv1rg7oq5r 7 หลายเดือนก่อน

      Под каким давлением вода подаётся ?

    • @haroldsmith45302
      @haroldsmith45302 5 หลายเดือนก่อน +1

      These are ferrigami art objects. Good work.