Will this bend say 1.5" Black iron water pipe? Any idea? Looks like the Creator of the video doesn't respond much. So thought I'd ask since you have one or is it tough enough just to bend thin wall it's best to go hydraulic for much work with thick stuff? Will it bend exhaust without and kinking? Any other comments you have from use you might know from experience with the Bender? Thanks
The quality of the model 32 is above anything you can purchase outside of the USA. Everything about the 32 is constructed heavy duty and the tolerance of the machining are very accurate. The packaging is also excellent and well protected. The customer service was also excellent Ryan,Kim and Craig are professional and will do whatever it takes to see that you're 100% happy. Note: Do yourself a favor and purchase a complete bender with the hydraulics.
@gamerepair2011, so you're saying there's a chance? (Watch the classic movie, Dumb & Dumber for proper context if you haven't seen it. I literally feel sorry for anyone who hasn't). Anyway, since you mentioned seemingly impossible odds or improbabilities, according to the late theoretical physicist, Dr. Stephen Hawking in his best selling book, 'A brief History of Time', the rate of expansion of the universe was so marginal, (something like only one part in 100,000 billion more than that which would have resulted in a collapse back into a singularity), as to be impossible but for the existence of God or some form of Intelligent Design. Either that or lots of trial and error. It's the same thing really. We are all just a collection of lessons learned about what can and can't be achieved, individually and collectively. Some just learn at a faster rate or choose greater challenges to overcome. Sometimes the challenge chooses us. Stephen Hawking for example, certainly had his but it didn't stop him thinking big.
How come your pins slide out and in nicely and on mine I need hammer and pry bars? And what is the extra painted black washer for that I don't find on the instructions?
Would like to every CLR die for each size pipe but can't afford that. If there are several different radius's for a given die which CLR would be the best one to cover most bending situations, the smallest CLR, the biggest CLR or if there happens to be more then 2 CLR radius the one in the middle?
Debido ala pandemia del cobit 19 que azotó demaciado ami país me quedé desempleado y estoy tratando de emprender un taller de fabrica de sillas y por eso quisiera obtener la máquina dobladora de tubos pero por la distancia se hace difícilmente obtener...tal vez puedas vender los planos de su máquina para poder armarlo aquí ... gracias estaré atento asu respuesta
Just picked up one this mornin' Bob,awesome bit of work..........
Will this bend say 1.5" Black iron water pipe? Any idea? Looks like the Creator of the video doesn't respond much. So thought I'd ask since you have one or is it tough enough just to bend thin wall it's best to go hydraulic for much work with thick stuff? Will it bend exhaust without and kinking? Any other comments you have from use you might know from experience with the Bender? Thanks
The quality of the model 32 is above anything you can purchase outside of the USA. Everything about the 32 is constructed heavy duty and the tolerance of the machining are very accurate. The packaging is also excellent and well protected. The customer service was also excellent Ryan,Kim and Craig are professional and will do whatever it takes to see that you're 100% happy. Note: Do yourself a favor and purchase a complete bender with the hydraulics.
you know this is quality made... cause at 0:26 that shit pops out literally
The odds on getting a reply from this seller are one in a million.
@gamerepair2011, so you're saying there's a chance? (Watch the classic movie, Dumb & Dumber for proper context if you haven't seen it. I literally feel sorry for anyone who hasn't).
Anyway, since you mentioned seemingly impossible odds or improbabilities, according to the late theoretical physicist, Dr. Stephen Hawking in his best selling book, 'A brief History of Time', the rate of expansion of the universe was so marginal, (something like only one part in 100,000 billion more than that which would have resulted in a collapse back into a singularity), as to be impossible but for the existence of God or some form of Intelligent Design.
Either that or lots of trial and error. It's the same thing really. We are all just a collection of lessons learned about what can and can't be achieved, individually and collectively. Some just learn at a faster rate or choose greater challenges to overcome. Sometimes the challenge chooses us. Stephen Hawking for example, certainly had his but it didn't stop him thinking big.
So if I have three bend on one pipe where do I mark the pipe to iknow where the start of the bend is.
How come your pins slide out and in nicely and on mine I need hammer and pry bars? And what is the extra painted black washer for that I don't find on the instructions?
Same questions here! Hoping to get an answer.
is there a lining mark or something to show where the bend will begin to start?
Center line on tube/pipe
I need that tool where can I find it? and how much it cost? do you do overseas shipping process?
Hola soy s Argentina Patagonia, quiero comprar esta dobladora, como me pongo en contacto con USTEDES???
are you still in business? I'm trying to find bending dies for the model 3 but doesn't seem like the website works anymore....
hello the colizas that are appreciated at 3:16 minutes are aluminum ????
Where can i buy it and what is the price
Hola Soy de ARGENTINA. Kiero comprar está dobladora, como lo puedo HACER???
What is the thinnest wall 1-1/2 and 1-3/4 , 4130 tubing you can bend without deforming the inside surface and flattening the outside wall...?
Would like to every CLR die for each size pipe but can't afford that. If there are several different radius's for a given die which CLR would be the best one to cover most bending situations, the smallest CLR, the biggest CLR or if there happens to be more then 2 CLR radius the one in the middle?
Rule of thumb is 3 times the pipe diameter. 2" pipe is 6" CLR, for instance... give or take.
Debido ala pandemia del cobit 19 que azotó demaciado ami país me quedé desempleado y estoy tratando de emprender un taller de fabrica de sillas y por eso quisiera obtener la máquina dobladora de tubos pero por la distancia se hace difícilmente obtener...tal vez puedas vender los planos de su máquina para poder armarlo aquí ... gracias estaré atento asu respuesta
can the hydraulics be added later?
Yes. The parts to add the hydraulics are available on their website.
could this bend 1 3/4" 6.5 stainless/ steel .012 easily with the handle supplied?
Very
Do you guys sell these to international customers? Cant seem to get any reply via email. Cheers
I've always wanted one of these but now we're building our own bender. We are gonna be using your dies though.. BAMF bender brohan..
Hi hope you're still alive! Did you build your own bender?
Hey Bob, how come you never show this bender bending a 2-1/2" tube using hydraulics of-course? :)
Just a thought, the "degree indicator" is called a protractor
Now do some thin tubing...
Not designed for thin wall tubing. Can't bend exhaust pipe. That bender costs alot more.
@@mikemocon8582 All it needs is a mandrel...
Now if only dies were actually affordable!!!! $400+ for a die is bs
Good day sir can you email me again im in dumaguete philippians
Im in Philippines
See the problems with the JD2 Model 32 bender:
th-cam.com/video/HCFQWkefZ-U/w-d-xo.html
th-cam.com/video/Uraie75DRG8/w-d-xo.html