ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
SDS Imports Duty SS45
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2020
- We hit the range with the SDS Imports Duty SS45 1911.
the FULLY upgraded 1911. Steel frame and polished 5 inches barrel with Stainless Steel finish and an 8 round magazine
![[LIVE] : ONE ลุมพินี 75 | คู่เอก "คมเพชร vs โอมาร์"](http://i.ytimg.com/vi/WugMG7Po8uw/mqdefault.jpg)
Just bought the railed version, used from GB. I am a huge 1911 guy and I have several TISAS 1911's. They are all trouble-free. I have always wanted a stainless semi-auto. Prices are only going to rise, so I grabbed one before they sell for a grand. I hate to carry my Colts because they might get scratched! LOL
So i purchased the sds imports carry 45b and have had it for about a week. A couple of interesting side notes on this gun. The frame slide and barrel are all forged carbon steel. They are parkerized then cerakoted. The barrel is hard chrome plated. The mainspring housing appears to be machined steel along with the grip safety. I couldn't find any seams that would indicate casting or mim. The slide stop also appears to be machined steel. The only parts that seem to be cast or mim are the hammer, sear, and disconnector but they seem well done. The slide to frame is tightly fit from the factory with a slight amount of movement after break in. So far its been incredibly reliable and impressive. My only complaint was the springs and the barrel bushing. I ordered new springs from wilson combat and i am replacing the recoil system with the nighthawk everlast system. The barrel bushing was loose on the slide and loose to the barrel so i installed a spare wilson barrel bushing i had in my parts bin. The bottom edges of the slide have been deburred so no sharp edges to cut you. I like it so much i ordered a stainless carry and im waiting on it to ship. I will be ordering a full size as well soon. These sds guns are very nice guns. Far better than the older zenith imported tisas. It feels like a kimber in hand with a looser fit barrel.
thanks for the info! looking into getting one here online and doing some research
For some odd reason I've been amazed the look of the 1911 guns and I finally decided to purchase my first person gun and I was in between a Glock or 1911 but every friend I know would recommend me to start with a Glock but this 1911 is amazing. Thank you for the awesome review! Will keep watching your videos for any other gun I get next!
Glocks are boring. there are so many other amazing firearms out there, but you do you.
I have the stainless duty and absolutely love it. Better fit & finish than the kimbers I was looking at with a much lower price point and don't get me started about colt....not paying $2k for a weapon from a manufacturer that's had questionable qc for quite a while. I carry my tisas stainless duty almost exclusively. I trust it and am extremely familiar with it and have decided that this one will never be sold or traded, ever.
As of mid-July 2022, SDS IMPORTS 1911 Duty B45 5", Black Cerakote, costs $462.50 retail, at Ky Gun Co.
Looks good!
If anyone doesn't know, Turkish guns are top fucking notch. Canik, Tisas, and Utas are top of the line. The Canik TP9SFX is an absolute beast race gun out of the box. Even the basic Tisas 1911 (base model of the one in the video) is excellent. I've owned both for years. Utas makes the UTS-15 shotgun which is amazing to shoot, sadly I do not own one yet. Soon though.
I bought the Tisas Service model chambered in .45 acp about a month ago.Havent shot it much yet,only 50 brass case fmj,100 Wolf steel case FMJ and 50 PMC hollow points so far.8 round MecGar mag it comes with has worked flawlessly while I see others with more expensive guns say they have to buy WC mags to feed HP rounds reliably.It has better fit and finish than a "comparable" RIA,ATI and the other "budget" priced 1911's.It is tighter and still smoother than those others.Has a VERY well done black Cerakote from the factory.Runs smooth as a hot knife thru butter.And accurate when I am,I am more used to revolvers.
I'd buy another one,actually looking another one now to use for a build.
lol, "Chamafered" and "Ambedextrious". I appreciate the review, looking at this pistol right now but I got a kick out of that
Pretty accurate for a reasonably priced 1911 right out of the box. Nice and clean looking stainless steel. Nice review.
It had great fit and finish.
I own an SDS Imports 1911 and am beyond happy with it. I have over 2000 rds through it with NO issues whatsoever. Accurate groupings even at 30 yrds. Should add I have a high end 1911 as well and the SDS is nice ... don't ignore it folks, if you see one buy it with confidence.
John could you tell us the exact model that you bought. 2000 rounds without an issue is very impressive. I normally don't buy absolutely new weapons I don't want to be the beta tester LOL it would be nice to know what model impressed you so. Thank you for your time. Simon
@@simonkenton5927 It is the SDS Imports 1911A1 U.S. Army Full Size Government Model
MPN: 1911A1 | UPC: 742309782453 Manufactured by Tisas in Turkey - Currently being sold on many online sites for about $370-$400 US New
@@megatrends tks take care. Simon
Do they ask for I’d to buy ?
@@mchalelassiter4726 haha yeah .... you could buy it online without one but you cant pick it up at the gun store without a background check.
I bought this very model a few days ago and after seeing this video, I can't wait to get out to the range with it!
How has it performed??
@@nicholasandrade198 In short? Like a champ! I've already ran close to 1000 rounds in it and I've not had a single misfire or failure to eject. The only mod I've done is change the grips out for a set of Hogue Grips and thats it. If you're in the market for a 1911A1, I'd recommend this one, hands down.
I’ve been carrying one on duty for 6 mouths now I’m running rail model with tlr 1 clone from la police gear strobe model I love it under 600 bucks out the door and if I lose it I can go buy another one I also put night sights put in safirland 6300 series holster lv 3 no problems it gets the job done worth the money for sure
Just came back from my lgs where I handled both the railed and non-railed versions of this gun. Granted it is fairly low in price but there are a lot of sharp edges; the thumb safeties were very light and did not activate with any authority; the triggers were 1911 but somewhat heavy; with my smaller hands at times the trigger wasn't activated because the grip safety wasn't fully depressed; and finally the grips were plastic. After break-in and with some new grips they probably would make good first time 1911s
I agree about the safety feeling weak. I replaced my plunger spring and spring pins with with wilson combat parts and the safety snicks firmly and clean. Feels like a whole new safety. The trigger pull is an ungodly strong main spring, replace it with an 18# or 19# and it lightens up to a clean 5.5 pound trigger with a pefect wall and short positive reset. The recoul spring is sketchy too so im replacing mine with a nighthawk everlast system. Seriously just replace the springs and guide rod and you have one hell of a gun
With a trigger job, that would be the perfect 1911 for Me :). I love that two tone configuration.
"CHAMFERED" :)
Great review. Seems like nice pistols especially for the price point! As a tactical firearms instructor who teaches 1911 classes, it has all my "personal" requirements for a 1911...forged frame & slide, series 70, bushing style barrel, GI guide rod & plug, ect. I just ordered 2! Thanks for the great review!!
When i checked the website they say hammer forged barrel but i cant find info saying forged frame. I use to own a tisas 1911 carry that had a cast frame. Had a hammer forged barrel. Sanded the frame to give a polished flats look and found small air pockets in the frame. Cast frames are usually a little thicker so i wouldn't worry too much either way
I contacted sds and all their 1911s are hammer forged frames, slides and barrels. I bought one to check it out and even the grip safety, mainspring housing and slide stop appear to be machined steel. No seams. Only thing that looks to be cast or mim is the ignition components.
How has it lived up
Thanks for the video you made the decision to buy very easy
Great review! I ordered the same pistol yesterday. Prices are going up though. Costing me $609.
One of the best pistols.
New subscriber. Nice channel. Good info
Solid delivery.
Just won from gunbroker, can’t wait for the gun to come
Great review and great shooting! I just bought this gun....can't wait to hit the range!
It shot great, we hope to get some of their other models in.
How do u like it
I have been teetering on the Springfield Mil Grade but I think I'm going to buy this pistol. Thank you.
Bought one today, 519 out the door. Havent shot it yet but im eager to see how well it shoots. Thanks for the review.
Have you shot it yet?
got mine for fathers day love it
NICE! Love the SDS 1911's!
It’s a nice pistol.
Great review! Thank you for sharing.
How many pound is the Triger please?
Love mine! Very accurate. Added new grips.
Will it swap out with standard 1911 full size grips? No need for cut out near safety?
Yeah. I ordered some. They arrived but haven’t had time to put them on yet. I know I know- it takes 5 minutes. Was in bad way. Still in hospital for week now by COVID. When get chance-plan to swap out. Got some nice 3-D skulls print. Should look cool.
Damn good review
Nice pistol and the SS looks nice. What type of magazines does it use? Only from SDS ar any 8+1 out there. Thanks
Pretty much any standard 1911 magazines will work with it
I want one so bad
great review. Which is better stainless or cerakote?
Thanks alot, had to go get one now!!!! Stop it!!!!!
😄
It's cham - fer or chamfered
Were you compensated for doing this review?
Thx. How many pounds is the Triger please
My three have 4.1 , 4.6 and 4.8 on a Lyman trigger gauge
Great review. I have been on the fence about picking up one of these. Now I'm more comfortable pulling the trigger on one... Get it? Thank you. Subbed
just got me the b45r carry
Where did you find the railed carry model? I cant ever find one in stock
I recently purchased the sds carry in 45 acp, what brand of holster did you use with yours in this video?
Do they ask for ID to buy ?
Where did you hear forged frame from? I had an older model tisas stainless carry that was cast frame hammer forged barrel?
Nevermind, their website lists hammer forged frame and slide on some of them but just says stainless on the model i looked at so i assume they are all hammer forged and just a typo. Looks like they stepped up the quality on materials since i owned mine
@@cImIcak these come with a tag that says forged frame barrel and slide. Sds confirmed it when i contacted them
@@cImIcak i purchased 2 after this video and both these have forged frames. The one i purchased a few years ago did not. Evidently sds required the frame to be forged on their 1911 imports.
I really want to get this gun but im im between this one and a sar9 9mm 😔😔
Both are great and both can be carried daily.
Get one then the other. Why choose. Or...buy both.
So is this a good gun, I've heard mixed reviews
It's good
Being an import I’m still skeptical about longevity of the weapon
I was gonna buy but that recoil was tough! I’m petite female I dunno about that baby 😂 great review though ! Thank you !
I would not worry about it at all. The .45 ACP is a fairly low pressure round so the recoil is more of a push than a snap. Not unpleasant for women. Two of the women in my office have shot one of my 1911's and now they are fans of the platform.
The recoil on a all steel 1911 isn't too bad. It's comparable to a sub or micro compact 9mm shooting hot loads. Be firm behind the gun and you will fall in love. This guy is letting the gun move around too much.
Am really interested in their pistols
Me too, check our site.
Love Mine!!!!
cham·fer,
Know what’s behind your target, a lot of bullets going through the woods, just saying.
Can this handle +P and up?
Personally, you dont really need +P in .45. Besides harder wear and tear, .45 hits hard enough to make +P redundant
I loved the review, Thank you! What brand holster do you recommend for this model? Also are all 1911 45 magazines universal for this gun?
The single-stack .45 1911 magazines are universal. I've got this exact pistol and 3 of my magazines are manufactured by Kimber. :)
As a side note, I use a Blackhawk CQB Serpa paddle holster for mine and it works well for it.
@@JoshMaerker awesome! Thanks for the recommendation! :)
Sticky Holsters LG-1L
Masc holsters out of Turkey. I ordered one for a Colt 1911, fit perfectly.
To be fair those aren’t normal sized hands. Lol
I wanna get one but my pawn shop has them for 600+
Don't buy it from a pawn shop bad idea. You are better off buying it new the price is only a lil bit higher
@@bruceborden8606 it is new at the pawn shop they sometimes have new guns but the pawn shops here usually have more guns than the actual gun store
Classic Firearms... Go to their website
Palmetto State Armory has several models and good prices!
The accuracy of the "gun". LMFAO. I think it's the accuracy of the shooter.
Nah this gun sells for only $400 for a reason
Manufactured in Turkey by Tisas. I’m just sayin’.
What are you saying?
Chamberfurred 😐
Chamerferred?? Lol
They are made from pot metal
You’re head is made from Pot Metal! 🤣
Hickok.45 and myself like to smoke some pot from time to time just saying😤