ฝัง
- เผยแพร่เมื่อ 19 พ.ค. 2024
- This video covers how to connect Raspberry Pi to Laptop wirelessly. Share your Raspberry Pi screen on laptop screen and control it with laptop mouse and keyboard. No need of having LAN cable. You can connect raspberry pi to home router or mobile hotspot and share screen on laptop connected to same network.
The written version of this video available here : github.com/samvidita/Connect-...
___________________Contents___________________
0:00 Introduction
0:35 Download OS and flash
3:27 Enable SSH
4:19 Configure WiFi (wpa_supplicant.conf)
6:40 Raspberry Pi configuration (sudo raspi-config)
7:28 VNC viewer
8:08 Fix 'Cannot currently show the desktop'
9:12 Adjust Raspberry Pi screen resolution
🟣 Follow us on Instagram
/ samvidita
🔵 Like our Page on Facebook
/ samvidita
_____________Hardwares Required_____________
🔸 Raspberry Pi (Any model with WiFi module)
🔸Micro SD card (Class 10 minimum 8GB Recomended)
🔸Power Adapter
_____________Softwares Required_____________
🔹 Raspberry Pi Imager : www.raspberrypi.org/software/
🔹 Raspberry Pi OS : www.raspberrypi.org/software/...
🔹 PuTTY : www.chiark.greenend.org.uk/~s...
🔹 VNC Viewer : www.realvnc.com/en/connect/do...
Check our other videos:
▶️ Connect Raspberry Pi to laptop with LAN cable : • How to connect raspber...
▶️ Control motor speed with MIT app via Bluetooth : • Control motor speed wi...
▶️ Control arduino from MIT app via Bluetooth : • Control arduino from M...
▶️ Nodemcu local time Internet clock : • Nodemcu local time Int...
▶️ DIY Bluetooth Speaker : • DIY Bluetooth Speaker ...
For any queries DM us on / samvidita or drop a mail to asksamvidita@gmail.com
#raspberrypi
#pi
#raspberry
#electronics
#linux
#arm
#raspbian
Like, Share, Subscribe and Support. Thank you. - วิทยาศาสตร์และเทคโนโลยี
Very Well explained, nice.
so simple and well explained! thank you
we can do it without creating 2 files (ssh and wpa-supplicant) just by clicking Ctrl-Shift-X
thanks man you made my day
Very useful bro thank u
This solved my issue 😊thanks
awesome bro, i learned something new today 😃😃
Thank you
thxx broo it worked!!!🥳🥳
Very helpful video for students
Thanks for the video
whenever I try try to flash os into sd card after verification it shows 'verifying write failed contents of sd card is different from what was written to it.
Thanks A Lot For This Video
Thank you keep supporting
@@SaMvidita Sure
how much long we can use raspberry pi connected to monitor ?
during the process of establishing connection between raspberry pi using putty do i need to connect my laptop with raspberry through a lan cable or not needed?
If you are using WiFi to connect then no need to connect LAN cable
i checked the ssh file and the network file everything is fine but too my raspberry wont connect
How can i fix " Software caused connection abort" sir??
What about mac can we follow the same procedure keeping in mind that we have different syntax for creating a ssh file?
Yes you can follow same procedure on MAC
* there is imager for MAC
* Instead of putty u can use terminal. Just type 'ssh pi@raspberrypi.local in terminal.
* There is vnc for MAC too.
Rest all the procedures are same (creating ssh file and wpa file)
Yes the syntax for creating ssh file is different in MAC
@@SaMvidita Thanks a lot!
How to connect it raspberry to laptop?? Last you say remove sd card and insert raspberry pi 5:26 I can't understand and my raspberry pi don't have any ethernet cable it's model 3 model a+
I don’t get wifi in this raspberry screen what I do.
While using Putty to make an SSH connection, I am getting an error that the Host doesn't exist. Why is it so. And how to correct it.
And after i checking for the Wifi file again in the SD card it is not there.
There are two possibilities
* SSH file is not created properly resulting in failure in SSH enabling.
* WiFi configurations are not correct. There might be problem with WiFi settings.
After boot SSH and wpa_supplicant.conf files will get deleted
For more details visit to github.com/samvidita/Connect-RaspberryPi-to-laptop-wirelessly
@@SaMvidita Thanks for replying. The raspberry has started working. I don’t know how but i just copied the code from where you have mentioned in the video instead of writing it and it worked. Thanks again.
@@SaMvidita Thanks for replying. The raspberry has started working. I don’t know how but i just copied the code from where you have mentioned in the video instead of writing it and it worked. Thanks again.
having the same issue
After putty installation, it says host does not exist
Can we power the raspberry pi from the same laptop in which putty is installed?
If you are using Pi 4 it is not recommended. It will harm the pi. Power it using suitable adapter.
hey, whenever i try to ssh into it through putty, it shows "connection refused". How do I fix that?
Please check your network connection
Sir when we open the putty download link, there are many options. Which one to select
If you are using Windows then go to MSI installer. Select depending on your system size (32bit / 64bit)
@@SaMviditaokay thank you
Can you do all of this with flash card but not micro sd
Yes you can
After flashing the sd card, when we remove and insert the card again, there is no partition.. It only shows boot drive
Yess boot drive itself is a partition. Check whether OS flashed properly or not then create necessary files
Do we need to connect ethernet cable to raspberry Pi at start
If you are connecting wirelessly then no need of using ethernet cable
While connecting with SSH, it displays error msg: host does not exist. Not able to connect the pi. Not able to understand when the pi boots, where to get the hostname or ip address of the pi. How to check whether wifi of pi is enabled or not?
Please help
same error,,,did you fix it?
@@surendarpc6007 I got the same error host does not exist. Did you solve it?
@@ayanpal5507 yes,,, pi not connected to wifi network hence it shows host doesn't exist...I using pi ip to login ,,,,now ssh is activated
@@ayanpal5507 I download the lite version software ,,,at this only our pi is connected to wifi and upgrade to desktop version
Sir after putty, it is only showing host does not exist
What to do sir
Please help
It's because ssh is not enabled properly or the network details you entered is not proper check it properly. We have given github link in description copy the text from there. If you come across any issue DM us on Instagram.
Does it work if network is mobile hotspot?
Yes
There is a problem in putty and I want to delete it and download again, but it's not getting deleted. why
Goto control and uninstall it from there
It says access is denied when I try to create ssh in cmd, how do I solve this?
Try run as administrator for command prompt.
@@molupiyush007 yeah, now its working, thanks!
How can I access finish button..?
Use arrow keys
For me it says "Unable to open connection raspberrypi.local host doesn't exist." How do i fixed this?
Same issue man, Were you able to resort it?
@@rajagopalanvg2142 nope I just bought a monitor. I think u need to set up ur pi with ur wifi first before you can do this. And the easiest way is to used a monitor and then after you can use VNC viewer with your pc.
@@tonykoulong9458I was able to resolve the issue today, watch this video th-cam.com/video/nZyyfJYOhbM/w-d-xo.html before watching this, while installing you should enable the SSH and set the WLAN configurations and then it works fine for me. I know that you have figured out other way, but this will be useful for others in future. Hit a thumbs up, if it is helpful.
@@rajagopalanvg2142 thanks man did you face this problem like host name doest exist or raspberry doesn't connect to wifi same like me?
@@gunasekharreddy4273 Yes dude
unable to connect to raspberrypi.local host does not exist
Try with raspberrypi once instead of raspberrypi.local and check your network connection also if wireless is not working then just connect LAN cable and check once
How do I know my country code?. It's Nigeria
Please refer to this link
countrycode.org/
it says access denied after typing password in putty
Please check if have given any custom password
@@SaMvidita well I even formatted the sd card and added new os
Kindly update your raspberry pi imager there after selecting OS you get advanced options settings. Please click on that and configure your pi. This is the ne update. There you can add ssh file and wireless settings including pi password
@@SaMvidita i bought a new raspi and installed imager newly
@@SaMvidita "Default "pi" user has been removed; the first-boot wizard enforces the creation of a new user account"
So, Putty does not works