Spot on info in my opinion. I have the v7 and the v9. I love the 7 and after fixing the 9, and the one they sent to replace it, its pretty good too. I use the 9 for lining and color packing and the 7 for soft shading now. I pushed a 14rs for lining with that v9 and it did awesome! Still though, I'm getting the EX-2 for lining asap, maybe tomorrow. You weren't lying, us family guys got bills to pay! But yeah man thanks for putting out reliable information for the tattoo community, its appreciated! Oh yeah, you mentioned that you are doing more detail work in black and gray, well that cheap like $10 rotary machine you see on Amazon is pretty badass for ultra fine detailing. I was thinking about trying to put a better replacement motor in one. The extreme light weight is nice for the little details. I also put a rca connector on mine. I just created a channel and will do a video on it soon. Anyways, just trying to give you some useful information back. Thanks again!
Thanks for the review man, been looking for a review on the v10 for some time now. Good looking out👍, question: What is the biggest grouping needle you would use on the v10 for lining? And Would you recommend the v10 for a lot of line work?
vinolin Naidu thanks for the kind words. Honestly I’ve used the v7 upto 12 gauge 11rl. So I know this will push at least upto that size and what kind of lining do you do? Traditional line work? Fine lining? Sculpting lines? Traditional it will take a bit longer cuz as I said you’ll have to slow down your hand speed a little for larger groupings, but the other two It would work great for without slowing down too much. If you have a slow hand speed while lining this will work for you. But some other machines I’d recommend if you wanna line large bold lines. It will do it but I feel thick lines are better with standard needles.
@@TheBeardedTattooer I generally use it for the traditional and sculpting lines. My most common large grouping would be the 13rl, what machines would you recommend?
Hey Adam, I hope you read this. I was wondering if the v10 is good for fine lines. I have a v2 and I always complain because I have to do several times to actually do a line and gets a little bigger or not so good. Thank you !! Cheers from Argentina !
The v10 is ok with small groupings but if you want a liner don’t get the v10. The v2 actually lines better than it. I would get the mini direct drive because I can use both carts and standard needles. And it’s very lightweight and inexpensive. And it lines well.
@@erixtorres5979 It will get a little warm after long periods of tattooing around 10 volts, but it has never given me any problems. I have used it this way for over a year. Almost 2 now actually.
@@natedevilin9573 i think its normal.. Yeah its not too hot.. Warm i think.. Other than that i dont have any issue... Thanks for the response dude.. I really appreciate it..
Hey ! Thanks for the video ! Do you know if there are other stroke than the 3.2/3.7 ? (I'm looking for a machine which could have something around 2.5 stroke to around 4.0)
I’m looking for a pen machine and I’m so indecisive because I want some thing that’s gonna back and speak for itself I was gonna order the bishop wand but still don’t know can somebody tell me something good about the bronc V 10
U can use the disposible grips from the xion on the v7 i dont like the xion or the v7 but ur right their pretty similar except the xion has better stronger motor
How is the weight on them I’m an apprentice and my mentor told me to get better equipment and I’m looking for something that has give like the fk Irons Xion I have the cnc q2 what’s your opinion?
I like the cnc q2. I just dont see why people are so opinionated about what machine brands artist are running. What works for one guy may not work for another, and at the end od the day its about the quality of work being done. Just because someone has a bishop wand does not mean the artist is going to become a master instantly..
Hope all is well Adam. Always good watching your channel. When you mentioned the "shortpen" in this video. Which one are you referring to exactly? If you have a moment to spare I'd appreciate the make and model so I can look into it. I actually just purchased my first pen. And I dont want to assume but I may have the 1 you're referencing here. I just purchased the all black CNC Q2. It's the 1 with the faulhaber motor. But that along with the hummingbird machine you recommended are still in the box as I'm pretty loyal to coil and certain rotary machines such as my bishop microangelo. Once I unbox these other machines I'll try to review everything myself. Bishop hands down has the best customer service I've ever had. Aside from that my clients and portfolio reflect my best work/season with the bishop microangelo. But I'm almost ready to explore some other machines and see what works best for me.
@@562southeastlos I’ve used it not reviewed it. The one I used was louder than the short pen and not as good. But it had the click twist which I prefer but that’s about all I like more.
@@TheBeardedTattooer oh I see.. definetley appreciate your opinion and your time Adam. I just gave you a follow on the gram so feel free to check me out @562southeastlos Btw I see you just grabbed that ps5🤟🏼 I'll be doing the same soon!!
I’m trying to purchase my first pen machine and I do not know which one to get I was looking at this bronc machine it looks decent but I don’t know I noticed you said something about the micro Angelo bishop
The new V7 is the same tattoo machine brother go check ✔ it out the same tattoo machine click grip with the balls on the V7 same tattoo machine exactly the same way Smoother then the old one just keeping it real.
@@erixtorres5979 hmm. That shouldn’t happen then. Unless your wrapping it up too much where it keeps heat it but I don’t see why it would heat up if you don’t exceed 9 volts
@@TheBeardedTattooer yeah.. I also wondering if its a replica.. But i verified it and its authentic.. 😔.. Everythings working fine thats the only concern.. Thats why iam doubting if it will last long.. 😑
BRK 13 oh ok. No problem. The v10 grip can go onto the v7 machine but not much. Some carts won’t work in it if you do that. Also the v7 cannot go onto the v10 machine.
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
Spot on info in my opinion. I have the v7 and the v9. I love the 7 and after fixing the 9, and the one they sent to replace it, its pretty good too. I use the 9 for lining and color packing and the 7 for soft shading now. I pushed a 14rs for lining with that v9 and it did awesome! Still though, I'm getting the EX-2 for lining asap, maybe tomorrow. You weren't lying, us family guys got bills to pay! But yeah man thanks for putting out reliable information for the tattoo community, its appreciated! Oh yeah, you mentioned that you are doing more detail work in black and gray, well that cheap like $10 rotary machine you see on Amazon is pretty badass for ultra fine detailing. I was thinking about trying to put a better replacement motor in one. The extreme light weight is nice for the little details. I also put a rca connector on mine. I just created a channel and will do a video on it soon. Anyways, just trying to give you some useful information back. Thanks again!
Thanks for the review man, been looking for a review on the v10 for some time now. Good looking out👍, question: What is the biggest grouping needle you would use on the v10 for lining? And Would you recommend the v10 for a lot of line work?
vinolin Naidu thanks for the kind words. Honestly I’ve used the v7 upto 12 gauge 11rl. So I know this will push at least upto that size and what kind of lining do you do? Traditional line work? Fine lining? Sculpting lines? Traditional it will take a bit longer cuz as I said you’ll have to slow down your hand speed a little for larger groupings, but the other two It would work great for without slowing down too much. If you have a slow hand speed while lining this will work for you. But some other machines I’d recommend if you wanna line large bold lines. It will do it but I feel thick lines are better with standard needles.
@@TheBeardedTattooer I generally use it for the traditional and sculpting lines. My most common large grouping would be the 13rl, what machines would you recommend?
Hey Adam, I hope you read this. I was wondering if the v10 is good for fine lines. I have a v2 and I always complain because I have to do several times to actually do a line and gets a little bigger or not so good.
Thank you !!
Cheers from Argentina !
The v10 is ok with small groupings but if you want a liner don’t get the v10. The v2 actually lines better than it. I would get the mini direct drive because I can use both carts and standard needles. And it’s very lightweight and inexpensive. And it lines well.
@@TheBeardedTattooer thank you very much!!! What is the name of that machine so I can get it here in Argentina ?
Thank you for answering !!!!!!
@@ayelenolivieri9738 it’s the mini direct drive w Swiss motor and it’s $100
I use my v7 at 10v lining every single day. I color pack at 9-9.5v. Has held up for a year so far so I’m happy with it.
Yikes that’s high
@@TheBeardedTattooer Lol. Works for my tattooing style.
Did your machine heated up? I have issues on that part... But not too much... Is it normal?
@@erixtorres5979 It will get a little warm after long periods of tattooing around 10 volts, but it has never given me any problems. I have used it this way for over a year. Almost 2 now actually.
@@natedevilin9573 i think its normal.. Yeah its not too hot.. Warm i think.. Other than that i dont have any issue... Thanks for the response dude.. I really appreciate it..
How do you adjust needle depth? Im about to purchase this machine. My first time buying a psn im used to coil machines
Hey ! Thanks for the video !
Do you know if there are other stroke than the 3.2/3.7 ? (I'm looking for a machine which could have something around 2.5 stroke to around 4.0)
U check out the cnc q2?
@@chefkenburnem211 couldn't find what stroke it has
GREAT MACHINE!! I ABSOLUTELY LOVE MINE!! 💯💯
I have v10.. Its all good but it heated when iam using it...is it normal? Or my voltage is too high that cause it?or what it may cause? TIA
Do you have it on hard string for color packing or soft setting
I’m looking for a pen machine and I’m so indecisive because I want some thing that’s gonna back and speak for itself I was gonna order the bishop wand but still don’t know can somebody tell me something good about the bronc V 10
U can use the disposible grips from the xion on the v7 i dont like the xion or the v7 but ur right their pretty similar except the xion has better stronger motor
Great review! Will the v10 fit any needle cartridges ?
Yak Ko yes.
Thank you.
Where can I order this machine ?
Yak Ko hummingbirdrotary.com
Aliexpress
that printer you have...what is the brand of that printer?
Does anyone know if there are disposable grips that are compatible with any of the bronc pen machines?
I believe the xion disposable grips are compatible with the v7 bronc. That’s what I’ve been told anyway
How is the weight on them I’m an apprentice and my mentor told me to get better equipment and I’m looking for something that has give like the fk Irons Xion
I have the cnc q2 what’s your opinion?
I like the cnc q2. I just dont see why people are so opinionated about what machine brands artist are running. What works for one guy may not work for another, and at the end od the day its about the quality of work being done. Just because someone has a bishop wand does not mean the artist is going to become a master instantly..
Is this good for shading and color?
What volt you use for shading?
Hope all is well Adam. Always good watching your channel. When you mentioned the "shortpen" in this video. Which one are you referring to exactly? If you have a moment to spare I'd appreciate the make and model so I can look into it. I actually just purchased my first pen. And I dont want to assume but I may have the 1 you're referencing here. I just purchased the all black CNC Q2. It's the 1 with the faulhaber motor. But that along with the hummingbird machine you recommended are still in the box as I'm pretty loyal to coil and certain rotary machines such as my bishop microangelo. Once I unbox these other machines I'll try to review everything myself. Bishop hands down has the best customer service I've ever had. Aside from that my clients and portfolio reflect my best work/season with the bishop microangelo. But I'm almost ready to explore some other machines and see what works best for me.
Anytime I say short pen I in this video I’m referring to the hummingbird short pen that looks similar to the sol nova.
@@TheBeardedTattooer ohhh okay I see I just checked that out on the hummingbird page. By chance have you used or reviewed the CNC Q2??
@@562southeastlos I’ve used it not reviewed it. The one I used was louder than the short pen and not as good. But it had the click twist which I prefer but that’s about all I like more.
@@TheBeardedTattooer oh I see.. definetley appreciate your opinion and your time Adam. I just gave you a follow on the gram so feel free to check me out @562southeastlos
Btw I see you just grabbed that ps5🤟🏼 I'll be doing the same soon!!
I’m trying to purchase my first pen machine and I do not know which one to get I was looking at this bronc machine it looks decent but I don’t know I noticed you said something about the micro Angelo bishop
Hi, the bronc ir motor maxon?
The new V7 is the same tattoo machine brother go check ✔ it out the same tattoo machine click grip with the balls on the V7 same tattoo machine exactly the same way Smoother then the old one just keeping it real.
so for thick lines it is not recommended?
Right I wouldn’t recommend it
@@TheBeardedTattooer thanks! which one would you recommend for thick lines?
Cnc grenade
I have v10.. Its all good but it heated when iam using it...is it normal? Or my voltage is too high that cause it?or what it may cause? TIA
I assum ur voltage is up to high. What is your voltage?
@@TheBeardedTattooer its not that high.. I only running it 8-9v..
@@erixtorres5979 hmm. That shouldn’t happen then. Unless your wrapping it up too much where it keeps heat it but I don’t see why it would heat up if you don’t exceed 9 volts
@@TheBeardedTattooer yeah.. I also wondering if its a replica.. But i verified it and its authentic.. 😔.. Everythings working fine thats the only concern.. Thats why iam doubting if it will last long.. 😑
@@erixtorres5979 it’s gotta be a fluke I’d get ahold of the company and tell them they are usually understanding and replace them.
So which 1 is good the v10 or v7??
They’re both great machines but If your wanting one or the other I’d say v10 it’s newer
Thank you!
can you change these machines with grips ?
BRK 13 how do you mean? Do you mean can you put grips on them? yes.
Adam_M_ Tattooing I meant if the grip from 10 matches the 7. forgive me writing with the translator
BRK 13 oh ok. No problem. The v10 grip can go onto the v7 machine but not much. Some carts won’t work in it if you do that. Also the v7 cannot go onto the v10 machine.
Adam_M_ Tattooing thank you, you helped me a lot, maybe you have the knowledge or grips from xion fit bronc 7 or 10?
My v7 has the balls for the kicer