UPDATE: I packed the figure back in box for 3 weeks since this video with the head sculpt still installed, and the chin received a new stain streak 😔 So please use caution with yours! If you're feeling comfortable, definitely try washing the inner dress to get rid of excess dye. Also, special thanks to Kit at OneSixthKit for providing a replacement head sculpt!
Honestly loving this line, the face sculpt is quite nice and the outfits are cute. My only issue, and it's not a big one but like wish people would chill about it, is the focus on the chest. Just chill. But otherwise great vid again
As always, thank you so much for watching 🥰 From the looks of it, the chest design looks like it's here to stay, so it's gonna be less interesting going forward. The tinfoil hat cynical conspiracy theorist in me is starting to suspect that intentionally i8Toys made Katherine's chest "small", only to plump it up later later so people wouldn't stop talking about it 😅
I finally summoned the courage to open mine... And there it is, slight stain on the inside of the neck joint, and a tad on the outside. On the clear jacket, slight stains near the armpits and the back. Looks pretty permanent, and would probably have gotten worse if left in the box any longer. There's pretty much no way to remove it except for airbrushing over it. For the clear jacket, no known remedy. Other than that, it's a pretty good figure, all things considered. No regrets buying it.
Well. If the staining was gonna happen anyway, at least the face sculpt for your copy isn't too severe affected. I'm glad you're still able to enjoy the figure~ And thanks for letting me know! Now I'm curious how widespread this issue really is.
Right? It's like i8Toys knew they struck gold with this formula. Now I have to get everything they crank out 😅 Still though, check for stains when you get yours. Good luck~
Thanks for another great review Eldbear. I really appreciate the way you edit everything to make things very clear and concise, all while fully showing off the figure and things to be aware of. Can't wait to get her
If you only want just one of these figures from the Herene Hound Line, I'd nominate Tache or Rine. They're lots of fun and lower maintenance compared to Katherine and Grainne. Happy collecting~
@@ElbearToys Sweet, canceling my waitlist for the Witch based on this advice. The twins are still kind of cheap or msrp on ebay. What do you think of the latest set on pre-order? Do you have a discord?
@@TheWizardjones Luckily I was able to get a replacement sculpt for Grainne. But the original one had gained a new stain streak just by being in the box. The twins on the other hand don't have the staining issues and are still affordable. Good luck hunting down a set~ Sadly no I don't have Discord. But I swear, one of these days I'll get my act together and be a proper TH-camr with all the social meeds like Discord, Reddit and all. I do have the Cerberus set on pre-order, though I'm only cautiously optimistic since looks like their first time departing from the usual face sculpts...hoping for the best though 🤞 I'll be getting the Han/Ming dynasty costume sets in the meantime as well. Hopefully they'll turn out OK.
@@ElbearToys ok. You’re like the only TH-camr that is an english speaker doing Tunshi Studios and other third parties. I am a little broke right now, but I am hoping at least Tache or Rine stays at that $250-300 range until I can get the funds for either.
Thank you again for watching! Hopefully i8Toys is aware of how popular their products had become, because it would be awesome if they reissue Katherine or do a 2.0. But yeah, now is better than later to snag one of these since prices usually are the lowest when a figure is first released. Happy collecting~
I originally skipped her, after watching your review I slapped myself for skipping..... Looked up on ebay, of course all around 250-300.... THEN found her on some Japanese store $150 each! bought 2 while screaming like little Girl, now I can't wait!!
Whoa...$150 is quite the steal! Good catch! I would pick one up to if I have the extra dough...because it's certainly nice to have spares since the staining issue seems to be somewhat widespread. Plus, you can set up both versions of the eyes with an extra faceplate so you don't have to swap them anymore 😁
Great review! I just discovered this figure yesterday and thinking about adding her to my collection. Such a cool and beautiful looking figure. As for the stain issues, that's unfortunate. I do have a video on my channel showing how I removed some stains from a Phicen body. Hopefully, it'll be helpful for you or anyone who experiences those dreaded stains in this hobby. 😊
Thank you for posting~ Loving your content as well as your 1/6 Replicade setup! And subbed! The complication on this figure (for me at least) is that the stain is on the face sculpt. I'm afraid applying chemicals will damage the paint on the face as well, as opposed to, say, a seamless body where the color and rubber are one and the same. Still though, gonna try your suggestion next time a seamless body gets stained. Thanks again!
@@ElbearToys Thanks for the sub! I subbed to your channel as well. Keep up the great content! By the way, I did go ahead and order i8Toys Grainne The Geis Witch figure and it was suppose to be delivered this past Friday, but for some reason the USPS system wants to keep my package for a little longer. It arrived to my local postal distribution facility and today the tracking shows it arrived at a postal distribution facility in another State. WTF! That's my one worry when the figure finally arrives if any staining will be evident. I guess we'll see. I do plan to do an unboxing and review of the figure. And if there's any stains, I'll mention and show in the video how I removed the stains if possible.
I love the style of the clothes. I like technowear so it's part of the appeal for the figure for me. I would absolutely get that jacket IRL. I wonder if the word Geis is supposed to be from the Irish Geas or the German Geist because either would actually work.
Hi friend! Your senses are sharp as usual! I believe "Grainne" and "geis" are borrowed from Irish words. Originally, I wanted stick to the Irish pronunciation, "grawn-yah". But since we're getting the phonetic translation from the story blob, I ended up going with how the creators envisioned it. Either ways, Grainne's jacket would be awesome to have IRL. Did you collect any 3A figures before they went under? If we ever see a male character from the Serene Hound line, I suspect he'd look similar to Tomorrow Kings.
@@ElbearToys So it's safe to assume with the naming convention and orange hair that she is Irish. Nice. I'm just imagining her with a thick accent teaching the other characters how to pronounce her name. XD I do have a 3A figure but it's a girl. Little Shadow. Very unique proportion and super detailed clothings. Ashley Wood's style is very distinctive. If i8 makes a male figure he'd probably looks pretty too to fit with the others style. That's not a complaint. XD
@@DmnHd81 Excellent choice! Little Shadow was one of my favs from the Adventure Kartel line~ It would be funny picturing every character being confused by what Grainne's saying but she still outdrinks everyone in the bar 🤣
Thanks for the review, well done. I pre-ordered this purely on the strength of the promo pics. Gotten it for about 2 weeks now, and still haven't opened it yet. Your warning about the stain really got me worried... I guess I'd better open it up soon and hope for the best 😅
Good luck! I have a distinct feeling that mine was just bad luck. Most of the photos I've seen from bloggers did not appear to have this issue. Should the worst happen, hopefully whoever you bought from can at least help with exchanges...because it looks like I'll have to buy replacement parts on eBay at this point.
@@ElbearToys I've had a few figure necks stained by dark colored clothing over the years. Hot Toys The Crow, Art-Figure Dredd, Toys Era Laser Eye. Unfortunately there does not seem to be any solution to this. Some vendors have recommended cling film to prevent torso stains, but that wouldn't work for heads and necks. Hope you will be able to get replacement parts for yours. Thanks again for the review 👍
Thank you so much! Your comment really made my day because I tried to make my videos at least interesting to watch even for those who don't follow this hobby at all. So again, thank you~
@@ElbearToys i was a 1/12 collector but after see you GT cloud and gunslinger by Limtoys, i start to collect 1/6! Love all your reviews Just wish that you made a review for link botw of medicom, im about to buy it and theres no good review out there, its a good figure ?
@@luigivaccariellos9379 Oh, BotW Link! Nice catch. I personally really like it. But it's made by Medicom, which is a blessing and a curse. It's a blessing because Medicom does great anime-style head sculpts, and they knocked it out of the park because Link has multiple expressions plus movable eyes. It's a curse because Medicom figures usually don't age well. I've had a few Kamen Riders that broke by themselves from just standing there because the plastic became brittle over time. This might be extreme, but I've seen pictures of tears in Link's neck because the soft rubber has hardened from exposure. But all in all, if you can find a good deal, definitely go for it. BotW Link is easily one of my favorite Medicom figures. I've even featured him a few times on my channel for size comparisons. It' still OK but I'm afraid to pose him for the reasons above. Lastly, I highly recommend this review below. Well it's not technically a review but it's got some of the best shots of the BotW Link. Hopefully you'll find it useful~ th-cam.com/video/UrQHOaIQdx8/w-d-xo.html
@@ElbearToys thanks !! Every word you say right there i heard like you speak in your videos haha, you are so professional Im no getting a good deal this time for link, its a expensive figure today.. 700+$ i really like Link but im also worried for the thinks you say, i collect 1/12 mafex fig and i know the poor QC from medicom.. :/ just selling part of my collection to pay link, but i want for that price a good, gooood figure
@@luigivaccariellos9379 At $700, it's a tough call. I don't wanna sound like the devil's advocate, but if you really want it, it's well worth it. It's only gonna get more expensive later. Plus, it's Medicom. A limited shelf life is almost in the contract even if you buy brand new. So have fun with it while it's here. If you can reasonably finance it, then your enjoyment is all that matters 😃
OMG, You got it really fast. Still waiting for mine. About the stains, I heard oxy 10 acne cream can remove them. or a magic eraser. if I get that, I will probably try those.
I have a hunch that the stains aren't common and I just had really bad luck. So hopefully yours is OK. I'm a bit hesitant on applying anything to remove the stains though, mainly because I'm afraid the paint app in the surrounding area will be damaged 😔
Hi friend! Im thinking to buy her haha xd i dont know who she is, but i love the colors and the cyberpunk style, do you recommend her ? I believe its a very good figure overall If i buy its gonna be with TW.
Hello friend!! I'd recommend this one BUT (and this is a big but) the staining haven't subsided on my figure. The chin's got a new stain streak after a month or so back in the box. My retailer was able to send a replacement which I'll store separately from the figure body. I'd try washing the inner dress a few times once I feel comfortable taking everything apart. So if you're getting this, definitely shop from a place that have some form of customer service. Sideshow actually carries i8Toys now if they cater to your area. And this brings me to my next point. Avoid TW if you can. It's come to my attention that many collectors weren't able to get their GameToys FF7 figures because TW never actually paid their vendors to secure any inventory. They always list below MSRP only to charge way too much with shipping. They collect upfront, so it's tough to reverse the transaction if they mess up your order a year later. Hot Toys is their bread and butter so they likely won't try to pull any funny business there. But it's gonna be risky if you order other brands with them, like Limtoys, Tunshi Studio, and GameToys to name a few. Not to mention, they likely won't have any replacement for defective items since they don't buy directly from suppliers. Hope that helps. Happy collecting~
@@ElbearToys thanks my friend !! Mm today shes sold out in almost every where, ebay or another stores have her for $250.. thats to much, in TW with shipping its like $200, i never had used TW in the past, only had limtoys arthur with comic sanctorum and now im scared xd haha but they always noticed me about the delays and send me photos from de manufacture of this restock from limtoys I dont know mate, this hobby its very hard to follow
@@luigivaccariellos9379 Dang it...I hate to be the one to bring you bad news, but Comic Sanctorum is really just Toys Wonderland in a different costume (they're ran by the same people). I'm not sure if Comic Sanctorum will actually deliver Limtoys' batch #2 Arthur Morgan, but I'd certainly consider that possibility given the recent developments. And yeah, this hobby is needlessly difficult to follow...thanks to scalpers and complications like TW/CS. As for now, some "community-approved" sellers are Giantoy, Gundamit, and OneSixthKit, the latter of which, actually has the batch #2 Arthur in stock.
@@ElbearToys I just ask for refund, they just send me an email today that Arthur its gonna be delayed until Jan, i already had him thanks TNS figures, but i just wanted another Arthur.. i Guess i have to pass to have 2 xD Btw and good news, i just found Grainne in the same page, TNS figures, i bouth inmediatly because i have good experiences with that store and was a good price. Just hope that shes come in great condition with no QC issues, i had very bad experiences with Mafex 1/12
@@luigivaccariellos9379 Wow...TW/CC won't have their batch 2 Arthurs until January. The cynic in me wants to say that's utter BS 😔 But congrats on getting yours from TNS!! If they ever come through next year, then having a second is worth considering just because Arthur has so many posing options. Plus, there's a new head sculpt add-on in the works. It's a bummer Medicom/Mafex never bothered to keep up with the times when it comes to build quality. And good luck with Grainne~ It's a good thing you're getting one now because if the staining is to happen, picking up a new one years later is gonna be disastrous.
Ooo thanks for the tip! I'll pluck mine out of storage this week and give it a try. Anything in particular I should try? Otherwise I'm just gonna dunk it in the normal rubbing alcohol (if not just apply a layer over affected portions).
@@ElbearToys Hello. Have you tried to soak it in alcohol? I got mine yesterday and it has the same issue. The head however is a different thing. Mine was not affected as hard as yours. Sure there is an stain line but near the neck hole and not visible near the chin as yours. I have to take off the head outside of the body when I store it in the box. Not sure how to avoid the stains on ther legs every time I store her inside the box. the buffer paper near her legs is so hard to insert.
@@toonleap I have yet to work on cleaning off the excess dye. Oh and if you haven't seen my pinned comment, the head sculpt received a new stain streak after 3 weeks of the video, but you have the foresight to leave the head sculpt off. Please continue until you're able to clean off the dress. Speaking of which, the GameToys Zack is having a similar issue. From what I can gather at the forums, some collectors recommend that you take the offending clothing and wash it in a bowl of warm water. Rinse and repeat until no more dye is visible in a wash, which might take up to 10-15 washes. I'm not sure if alcohol works any better as it seems like the dye just need a solvent to carry out the excess. Hope that helps~
I thought about this too but decided to side with how the creators of the character envisioned it. It's not necessarily correct, but it is what it is. An analogy would be Luffy from One Piece is pronounced "loofy" instead of "love-y". Along with the word "geis", it's obvious these were borrowed from Irish words. But Grainne was spelled without the proper diacritical marks. And of the two words, Grainne was also the only word that had a phonetic translation in the story blob, that's what I ended up going with. Too bad though. It would have worked out perfectly if it even sound remotely like "grawn-yah".
UPDATE: I packed the figure back in box for 3 weeks since this video with the head sculpt still installed, and the chin received a new stain streak 😔 So please use caution with yours! If you're feeling comfortable, definitely try washing the inner dress to get rid of excess dye.
Also, special thanks to Kit at OneSixthKit for providing a replacement head sculpt!
Honestly loving this line, the face sculpt is quite nice and the outfits are cute. My only issue, and it's not a big one but like wish people would chill about it, is the focus on the chest. Just chill. But otherwise great vid again
As always, thank you so much for watching 🥰
From the looks of it, the chest design looks like it's here to stay, so it's gonna be less interesting going forward. The tinfoil hat cynical conspiracy theorist in me is starting to suspect that intentionally i8Toys made Katherine's chest "small", only to plump it up later later so people wouldn't stop talking about it 😅
I finally summoned the courage to open mine... And there it is, slight stain on the inside of the neck joint, and a tad on the outside. On the clear jacket, slight stains near the armpits and the back. Looks pretty permanent, and would probably have gotten worse if left in the box any longer.
There's pretty much no way to remove it except for airbrushing over it. For the clear jacket, no known remedy.
Other than that, it's a pretty good figure, all things considered. No regrets buying it.
Well. If the staining was gonna happen anyway, at least the face sculpt for your copy isn't too severe affected. I'm glad you're still able to enjoy the figure~
And thanks for letting me know! Now I'm curious how widespread this issue really is.
i8Toys face sculpt is always mesmerizing. instant purchase!
Right? It's like i8Toys knew they struck gold with this formula. Now I have to get everything they crank out 😅 Still though, check for stains when you get yours. Good luck~
Thanks for another great review Eldbear. I really appreciate the way you edit everything to make things very clear and concise, all while fully showing off the figure and things to be aware of. Can't wait to get her
Thank you so much for the kind feedback~ Congrats on getting your soon! I hope yours will be OK but definitely keep an eye out for stains 🙂
I keep passing by these figures on Big Bad toy store and kind of want at least one of these figures.
If you only want just one of these figures from the Herene Hound Line, I'd nominate Tache or Rine. They're lots of fun and lower maintenance compared to Katherine and Grainne. Happy collecting~
@@ElbearToys Sweet, canceling my waitlist for the Witch based on this advice. The twins are still kind of cheap or msrp on ebay. What do you think of the latest set on pre-order? Do you have a discord?
@@TheWizardjones Luckily I was able to get a replacement sculpt for Grainne. But the original one had gained a new stain streak just by being in the box. The twins on the other hand don't have the staining issues and are still affordable. Good luck hunting down a set~
Sadly no I don't have Discord. But I swear, one of these days I'll get my act together and be a proper TH-camr with all the social meeds like Discord, Reddit and all.
I do have the Cerberus set on pre-order, though I'm only cautiously optimistic since looks like their first time departing from the usual face sculpts...hoping for the best though 🤞
I'll be getting the Han/Ming dynasty costume sets in the meantime as well. Hopefully they'll turn out OK.
@@ElbearToys ok. You’re like the only TH-camr that is an english speaker doing Tunshi Studios and other third parties. I am a little broke right now, but I am hoping at least Tache or Rine stays at that $250-300 range until I can get the funds for either.
Your videos has made me start collect 1/6 figurines :)
Hey thanks!! I remember~ Hopefully you have a nice collection going at this point 😃
Still looking for katherine. Another well done review . Missed the P.O but looks like im gonna get this
Thank you again for watching! Hopefully i8Toys is aware of how popular their products had become, because it would be awesome if they reissue Katherine or do a 2.0. But yeah, now is better than later to snag one of these since prices usually are the lowest when a figure is first released. Happy collecting~
I originally skipped her, after watching your review I slapped myself for skipping..... Looked up on ebay, of course all around 250-300.... THEN found her on some Japanese store $150 each! bought 2 while screaming like little Girl, now I can't wait!!
Whoa...$150 is quite the steal! Good catch!
I would pick one up to if I have the extra dough...because it's certainly nice to have spares since the staining issue seems to be somewhat widespread. Plus, you can set up both versions of the eyes with an extra faceplate so you don't have to swap them anymore 😁
@@ElbearToys There was last one left, which is gone now, someone must have read my comment :p
Great review! I just discovered this figure yesterday and thinking about adding her to my collection. Such a cool and beautiful looking figure. As for the stain issues, that's unfortunate. I do have a video on my channel showing how I removed some stains from a Phicen body. Hopefully, it'll be helpful for you or anyone who experiences those dreaded stains in this hobby. 😊
Thank you for posting~ Loving your content as well as your 1/6 Replicade setup! And subbed!
The complication on this figure (for me at least) is that the stain is on the face sculpt. I'm afraid applying chemicals will damage the paint on the face as well, as opposed to, say, a seamless body where the color and rubber are one and the same. Still though, gonna try your suggestion next time a seamless body gets stained. Thanks again!
@@ElbearToys Thanks for the sub! I subbed to your channel as well. Keep up the great content!
By the way, I did go ahead and order i8Toys Grainne The Geis Witch figure and it was suppose to be delivered this past Friday, but for some reason the USPS system wants to keep my package for a little longer. It arrived to my local postal distribution facility and today the tracking shows it arrived at a postal distribution facility in another State. WTF!
That's my one worry when the figure finally arrives if any staining will be evident. I guess we'll see. I do plan to do an unboxing and review of the figure. And if there's any stains, I'll mention and show in the video how I removed the stains if possible.
I love the style of the clothes. I like technowear so it's part of the appeal for the figure for me. I would absolutely get that jacket IRL. I wonder if the word Geis is supposed to be from the Irish Geas or the German Geist because either would actually work.
Hi friend! Your senses are sharp as usual! I believe "Grainne" and "geis" are borrowed from Irish words. Originally, I wanted stick to the Irish pronunciation, "grawn-yah". But since we're getting the phonetic translation from the story blob, I ended up going with how the creators envisioned it.
Either ways, Grainne's jacket would be awesome to have IRL. Did you collect any 3A figures before they went under? If we ever see a male character from the Serene Hound line, I suspect he'd look similar to Tomorrow Kings.
@@ElbearToys So it's safe to assume with the naming convention and orange hair that she is Irish. Nice. I'm just imagining her with a thick accent teaching the other characters how to pronounce her name. XD
I do have a 3A figure but it's a girl. Little Shadow. Very unique proportion and super detailed clothings. Ashley Wood's style is very distinctive. If i8 makes a male figure he'd probably looks pretty too to fit with the others style. That's not a complaint. XD
@@DmnHd81 Excellent choice! Little Shadow was one of my favs from the Adventure Kartel line~
It would be funny picturing every character being confused by what Grainne's saying but she still outdrinks everyone in the bar 🤣
Thanks for the review, well done. I pre-ordered this purely on the strength of the promo pics. Gotten it for about 2 weeks now, and still haven't opened it yet. Your warning about the stain really got me worried... I guess I'd better open it up soon and hope for the best 😅
Good luck! I have a distinct feeling that mine was just bad luck. Most of the photos I've seen from bloggers did not appear to have this issue. Should the worst happen, hopefully whoever you bought from can at least help with exchanges...because it looks like I'll have to buy replacement parts on eBay at this point.
@@ElbearToys I've had a few figure necks stained by dark colored clothing over the years. Hot Toys The Crow, Art-Figure Dredd, Toys Era Laser Eye. Unfortunately there does not seem to be any solution to this. Some vendors have recommended cling film to prevent torso stains, but that wouldn't work for heads and necks.
Hope you will be able to get replacement parts for yours. Thanks again for the review 👍
Always its a pleasured to watch your reviews, even if i dont buy the same figures haha
Thank you so much! Your comment really made my day because I tried to make my videos at least interesting to watch even for those who don't follow this hobby at all. So again, thank you~
@@ElbearToys i was a 1/12 collector but after see you GT cloud and gunslinger by Limtoys, i start to collect 1/6! Love all your reviews
Just wish that you made a review for link botw of medicom, im about to buy it and theres no good review out there, its a good figure ?
@@luigivaccariellos9379 Oh, BotW Link! Nice catch. I personally really like it.
But it's made by Medicom, which is a blessing and a curse. It's a blessing because Medicom does great anime-style head sculpts, and they knocked it out of the park because Link has multiple expressions plus movable eyes. It's a curse because Medicom figures usually don't age well. I've had a few Kamen Riders that broke by themselves from just standing there because the plastic became brittle over time. This might be extreme, but I've seen pictures of tears in Link's neck because the soft rubber has hardened from exposure.
But all in all, if you can find a good deal, definitely go for it. BotW Link is easily one of my favorite Medicom figures. I've even featured him a few times on my channel for size comparisons. It' still OK but I'm afraid to pose him for the reasons above.
Lastly, I highly recommend this review below. Well it's not technically a review but it's got some of the best shots of the BotW Link. Hopefully you'll find it useful~
th-cam.com/video/UrQHOaIQdx8/w-d-xo.html
@@ElbearToys thanks !! Every word you say right there i heard like you speak in your videos haha, you are so professional
Im no getting a good deal this time for link, its a expensive figure today.. 700+$ i really like Link but im also worried for the thinks you say, i collect 1/12 mafex fig and i know the poor QC from medicom.. :/ just selling part of my collection to pay link, but i want for that price a good, gooood figure
@@luigivaccariellos9379 At $700, it's a tough call. I don't wanna sound like the devil's advocate, but if you really want it, it's well worth it. It's only gonna get more expensive later. Plus, it's Medicom. A limited shelf life is almost in the contract even if you buy brand new. So have fun with it while it's here. If you can reasonably finance it, then your enjoyment is all that matters 😃
OMG, You got it really fast. Still waiting for mine. About the stains, I heard oxy 10 acne cream can remove them. or a magic eraser. if I get that, I will probably try those.
I have a hunch that the stains aren't common and I just had really bad luck. So hopefully yours is OK. I'm a bit hesitant on applying anything to remove the stains though, mainly because I'm afraid the paint app in the surrounding area will be damaged 😔
can u do rocket toys itachi and madara
As soon as they're released 😁
Hi friend! Im thinking to buy her haha xd i dont know who she is, but i love the colors and the cyberpunk style, do you recommend her ? I believe its a very good figure overall
If i buy its gonna be with TW.
Hello friend!! I'd recommend this one BUT (and this is a big but) the staining haven't subsided on my figure. The chin's got a new stain streak after a month or so back in the box. My retailer was able to send a replacement which I'll store separately from the figure body. I'd try washing the inner dress a few times once I feel comfortable taking everything apart. So if you're getting this, definitely shop from a place that have some form of customer service. Sideshow actually carries i8Toys now if they cater to your area.
And this brings me to my next point. Avoid TW if you can. It's come to my attention that many collectors weren't able to get their GameToys FF7 figures because TW never actually paid their vendors to secure any inventory. They always list below MSRP only to charge way too much with shipping. They collect upfront, so it's tough to reverse the transaction if they mess up your order a year later. Hot Toys is their bread and butter so they likely won't try to pull any funny business there. But it's gonna be risky if you order other brands with them, like Limtoys, Tunshi Studio, and GameToys to name a few. Not to mention, they likely won't have any replacement for defective items since they don't buy directly from suppliers.
Hope that helps. Happy collecting~
@@ElbearToys thanks my friend !!
Mm today shes sold out in almost every where, ebay or another stores have her for $250.. thats to much, in TW with shipping its like $200, i never had used TW in the past, only had limtoys arthur with comic sanctorum and now im scared xd haha but they always noticed me about the delays and send me photos from de manufacture of this restock from limtoys
I dont know mate, this hobby its very hard to follow
@@luigivaccariellos9379 Dang it...I hate to be the one to bring you bad news, but Comic Sanctorum is really just Toys Wonderland in a different costume (they're ran by the same people). I'm not sure if Comic Sanctorum will actually deliver Limtoys' batch #2 Arthur Morgan, but I'd certainly consider that possibility given the recent developments.
And yeah, this hobby is needlessly difficult to follow...thanks to scalpers and complications like TW/CS. As for now, some "community-approved" sellers are Giantoy, Gundamit, and OneSixthKit, the latter of which, actually has the batch #2 Arthur in stock.
@@ElbearToys I just ask for refund, they just send me an email today that Arthur its gonna be delayed until Jan, i already had him thanks TNS figures, but i just wanted another Arthur.. i Guess i have to pass to have 2 xD
Btw and good news, i just found Grainne in the same page, TNS figures, i bouth inmediatly because i have good experiences with that store and was a good price. Just hope that shes come in great condition with no QC issues, i had very bad experiences with Mafex 1/12
@@luigivaccariellos9379 Wow...TW/CC won't have their batch 2 Arthurs until January. The cynic in me wants to say that's utter BS 😔 But congrats on getting yours from TNS!! If they ever come through next year, then having a second is worth considering just because Arthur has so many posing options. Plus, there's a new head sculpt add-on in the works.
It's a bummer Medicom/Mafex never bothered to keep up with the times when it comes to build quality. And good luck with Grainne~ It's a good thing you're getting one now because if the staining is to happen, picking up a new one years later is gonna be disastrous.
Transparent clothes can be soaked in alcohol.
Ooo thanks for the tip! I'll pluck mine out of storage this week and give it a try. Anything in particular I should try? Otherwise I'm just gonna dunk it in the normal rubbing alcohol (if not just apply a layer over affected portions).
@@ElbearToys Yes, soak it all in rubbing alcohol for several hours.
@@ElbearToys Hello. Have you tried to soak it in alcohol? I got mine yesterday and it has the same issue. The head however is a different thing. Mine was not affected as hard as yours. Sure there is an stain line but near the neck hole and not visible near the chin as yours. I have to take off the head outside of the body when I store it in the box. Not sure how to avoid the stains on ther legs every time I store her inside the box. the buffer paper near her legs is so hard to insert.
@@toonleap I have yet to work on cleaning off the excess dye. Oh and if you haven't seen my pinned comment, the head sculpt received a new stain streak after 3 weeks of the video, but you have the foresight to leave the head sculpt off. Please continue until you're able to clean off the dress.
Speaking of which, the GameToys Zack is having a similar issue. From what I can gather at the forums, some collectors recommend that you take the offending clothing and wash it in a bowl of warm water. Rinse and repeat until no more dye is visible in a wash, which might take up to 10-15 washes. I'm not sure if alcohol works any better as it seems like the dye just need a solvent to carry out the excess.
Hope that helps~
作り込みがすげぇ(・・;)
でしょ!! (^^)
Grainne is an Irish name. Why translate from Chinese
I thought about this too but decided to side with how the creators of the character envisioned it. It's not necessarily correct, but it is what it is. An analogy would be Luffy from One Piece is pronounced "loofy" instead of "love-y".
Along with the word "geis", it's obvious these were borrowed from Irish words. But Grainne was spelled without the proper diacritical marks. And of the two words, Grainne was also the only word that had a phonetic translation in the story blob, that's what I ended up going with. Too bad though. It would have worked out perfectly if it even sound remotely like "grawn-yah".
@@ElbearToys understandable have a nice day
Portrait are not for me.