RESURRECTING MY 6.7 CUMMINS!! || SMEDING DIESEL INTERCOOLER UPGRADE!!
ฝัง
- เผยแพร่เมื่อ 12 พ.ย. 2023
- Thank You for watching I appreciate all of you! As always links are below for Products!! LIKE, COMMENT & SUBSCRIBE! Don't Forget to FOLLOW the Instagram Page for 24 hour updates!! CHECKOUT LINKS BELOW!!!
4th GEN MDC Intercooler- www.mdcdiesel.com/products/13...
-FOLLOW CHANNEL INSTA@ / everythang_diesel
Music by Ryan Little - Fear God - thmatc.co/?l=066C7619
FOR CCS TUNING AND ANY DIRTY DIESEL CUSTOMS PARTS USE LINK BELOW! 7% OFF CCS TUNING AND 10% OFF DDC PRODUCTS! DISCOUNT AUTOMATICALLY APPLIED AT CHECKOUT.
www.dirtydieselcustom.ca/ever...
WANT 10% OFF AMSOIL OIL PRODUCTS?! Call, Text or Email ADRIAN BARAJAS (760)525-7401 Or EMAIL Adrian@dieseloilguy.com .... MENTION EVERYTHANG DIESEL FOR DEAL. VISIT www.amsoil.com/?zo=5577430 FOR DIRECT LINK TO AMSOIL ONLINE AND TO REQUEST FREE CATALOG.
-MDC DIESEL $100 OFF ORDER "everythangdiesel" www.mdcdiesel.com
-JAM HANDLES 20% OFF ORDERS "everythang diesel" www.jamhandle.com
-BEANS DIESEL PRODUCTS 10% OFF ORDERS "BeanMachine10" www.bdpshop.com
**GET $100 OFF EVERY COMPLETE TURBO KIT OR DIRECT BOLT IN TURBO WITH MDC DIESEL! USE COUPON CODE "everythangdiesel" ALL ONE WORD OR CALL AND MENTION EVERYTHANG DIESEL 210-410-3931/ www.mdcdiesel.com/default.asp
FOR BUSINESS INQUIRY'S EMAIL Everythangdiesel@gmail.com
EZ Lift Tail Gate- amzn.to/3L7EIvr
6.7 Cummins CCV Bypass- amzn.to/3iqdSSR
5.9/6.7 Xotic Head Studs- amzn.to/36BgJpx
Adams Car wash soap- amzn.to/3NlLxLV
Beans Diesel Sump- amzn.to/3CYYkPx
Glowshift Gauges- amzn.to/3L0yldd
Fuel Rail Plug 6.7 Cummins- amzn.to/34ZblvK
Edge CTS3 Insight Monitor- amzn.to/3qpAS90
Banks iDash- amzn.to/3N9mCef
Banks Rear Diff Cover- amzn.to/3IxLN6C
Banks PEDAL MONSTER- amzn.to/3imy87Y
Cummins Oil Filter Plug/Cap- amzn.to/3iqYd5H
13-18 Revmax Thermostat bypass 68rfe- amzn.to/3D2yYju
68rfe Transmission filter KIT- amzn.to/3irkdxo
Flexible Metal Funnel- amzn.to/3NdSPRQ
Ram2500/3500 Diesel Fuel Cap- amzn.to/3udW6Yp
Adam's Graphene Ceramic Coating- amzn.to/3qnsYNa
Adam's Wheel Cleaner- amzn.to/3ueq4eZ
Adam's Graphene Detail Spray- amzn.to/3InF0fS
Adam's Tire Shine- amzn.to/36hVmcW
Fortin Evo Remote Start CHRT 5- amzn.to/3qkeX31 - ยานยนต์และพาหนะ
Pro tip. If you need to clean the cooler take it to a radiator shop. They will boil it out and pressure test it.
Damn that is smart as hell! Might do that and see if I can sell it for what it is.
Love the content brotha TH-cam sucked when you weren’t posting 💯
I'm dead 🤣🤣 appreciate it bro, I'll have another video or 2 dropping this weekend 💯🤙🏾
Great video as always, I've used your's for some things that I have done to my 07 6.7 that I still have and drive daily, except for the last month when it decided to go into 4th gear limpmode. So we tracked it down to a bad TCM and a bad Plug. Plug is changed now waiting on the new TCM. I just can't believe they would want you to pay for shipping back that blown turbo. But like you said life goes on and I've cut my losses on my share of stuff. Glad to see you posting again, waiting on the next one. Keep it up, and your garage looks like mine ! 😂😅
Yessir, it is what is haha life goes on man. What can u say🤷🏾♂️
Good video Cam! The situation sucks but the end setup will be dope!! Can’t wait
Exactly man I'm pumped!!!
A little powder coat and some stainless pipes🤔
I think where your minds at haha
That's great news!! I'm very happy!!
Yessirrrrr!!!
@@EVERYTHANGDIESEL 👍💪😀
Are you doing grid heater delete? Can you do step by step I’m trying too do that next I have 2015 3500 with 156k deleted
Yessir I'll be doing a grid heater delete coming up next week!
@@EVERYTHANGDIESEL can’t wait
been watching for a couple years now and I love your videos bro. I got a 2012 6.7 cummins that I’m slowly trying to build up and your videos have been awesome for me for so many different things. good luck with your new endeavors for the truck🤘🏽🛻
Appreciate the following man thank you!! I'm glad my videos help!
Good work buddy, I did learn something from this video. My 2016 has an aftermarket bumper an for whatever reason I didn’t get the front air valance, put back on after the bumper swap, and I really didn’t know what it look like until I saw it on yours, so yeah, good job buddy. Keep up the good work.💯👍
We all learn something everyday haha. Yea man that was my first time doing the intercooler on a 4th gen 13-18 so figured it would help someone! I don't think the valence is do or die but I'm sure it has some sort of purpose
Definitely go with the powdercoat, wouod look great with the color of your truck. Great video as always 👍
Thank you and I agree!!
Can you tell me what size the drive shaft spacer is you out on the white mega cab
I think it was like a 2in spacers tbh I don't remember
@@EVERYTHANGDIESEL do you remember where you got it
@robertkochert5757 ordered a zone offroad index ring kit and it came with it
Did you just walk that intercooler in from under the truck and not install by 2ay of removing front grill ect...?
Yes, you don't have to remove none of that stuff in the front.
@EVERYTHANGDIESEL
Of all the videos and past one that you did. Everyone took off the grill. Thanks, as always for the time you spend here.
Good content, I’m surprised that you haven’t done the grid heater delete yet but no better time than now while you have it apart this far. I did the grid heater delete on my 2017 Ram when I first got it I installed the
Banks Gen2 grid heater delete kit when I first started the engine knew right away that it will run better, can hear the turbo spooling which is
music to my ears lol
Also i have been a truck mechanic for 30 plus years and I have only seen 1 turbo grenade and what a mess lol
So I agree with you on what needs to be done before reassembly starts but looking forward to seeing the truck when it’s finished 👍🏻
Failed to mention on my last response that
I share my Birthday 🎂 with the U.S.M.C
Grid heater delete is a good mod for sure. I haven't met anyone who experienced the nut dropping into the cylinder but I'm sure it has happened. Only reason I have done it sooner was cause I not reason to take it off until now lmao. Happy belated bday man!! You got a good bday date haha 💯🙌🏾🙌🏾
@@EVERYTHANGDIESEL
Living here on
Long Island, NY my heater comes on, and I also have not heard of the bolt breaking off but wasn’t taking any chances.
Thanks for the birthday wishes👍🏻
Been subscribing and watching your videos since the begining brother. I know you will like it better powder coated so just do it now lol. Also man you could still run that smeding turbo as a compound setup with your 2nd gen swap. And i know how much you miss the compounds you had on the 3rd gen. I seen the look you had whwn you sold it, so you are gonna want to do it to the 4th gen. I will be waiting for all the follow up videos on this build brother. Im excited for ya. Happy late veterans day brother Semper Fi from the Hooah side lol
Happy veterans day man! And yes u are correct about the compounds 🤣, I gotta take baby steps to have content for yal cant do all the cool shit in one video 🤣. Eventually side by sides might be a thing.
Why did you choose this over a Banks?
Considering doing this too, so I’m learning.
Tbh cost. It's a significant difference
Did you take your exhaust apart and fish the broke off turbine out
All the turbine is on the side of the highway when it blew out 🤣
On my 4th gen , when I did the banks monster ram. The fuel lines were way way over torqued. It was a battle getting them off.
I'll find out soon what's in store for me 🤣🤣
@EVERYTHANGDIESEL banks instructions said 40 foot lbs. I swear they were well over 100 plus. I didn't even remove #6 I just slightly flexed up the fuel rail. Saved some grief
You really need a garage shop.
Absolutely 🤣🤣
definitely powder coat, maybe stick with a polished billet valve cover, that combo looks sick imo
I agree man!
I watch all of them bro
Hell yeah, thank you!✊🏾💯
Time for the duel cp3 and 200% over injectors!!
U might be on to something haha
Adversity turned into a better truck. Win win. A little frustration and labor for a better build. ❤ Amen brother.
Absolutely man!! That's all u can do!
I'd personally swap the intake horn out for a banks one. If you're going to keep it, I vote to powder coat it.
TBC....🤭
@EVERYTHANGDIESEL The reason I chose banks was because I live in Canada and I wanted to keep the heater. -40 here quite often. Had mine done illusion orange to match my rpi diesel cold air intake. Plus, it's banks... Can't go wrong getting parts from them.
@jsav5845 valid points man. Think I'll have a surprise part pop up haha 🤙🏾
@jsav5845 pusher will also add a bung or 2 on there intake manifolds if requested. I have a single dih4 heater on my pusher horn in northern Alberta, works flawless
Man you should send that turbo back to see what Ryan would say so a lot of other people don't just start sending back their RDS turbos but as they say in France "c'est la vie" lol
I'm already sending off the turbo to get some money for it. Tbh it's life, sometimes u just gotta move on lol
All jokes aside the second gen swap is gonna be badass frfr 🤙🏿
Yessuhhhh I can't wait 💯🤙🏾🤙🏾
💯💯💯
💯✊🏾✊🏾✊🏾
No sound?
U clicked too fast! Sound loads separately. It should work by now. I have sound.
What the other dude said lol
nah g im active US Army ill never want something bad to happen to you i just want the install on Evilfab before i buy it lmfaooo 😂 plus im from FL too
🤣 appreciate that G, just pull the trigger on it man. U won't be disappointed in that kit at all! Install for most of these 2g swap kits a pretty similar
First 🎉
Haha ✊🏾