Hi i have ford Ranger XLT 2014 4X2 The problem is i replace the original hallogen bulb with Novsight N60Led lights 200w at first it goes well after fews days high and low went out. I tried to reset it with scanner after few days it went out again
I had the problem with a burned bulb on the driver side. I changed the bulb but still did not work on low beam, only high beam. Went to service and while trying to delete the low beam error and do resets, they also broke the oposite side low beam, so now low beam is not working on both sides and the errors can;t be deleted. Rest of lights works, high beam, positions, projectors, signals.
Yes very helpful info ...thanks for sharing ,👍
Very worthwhile knowing thanks. Sure is hot mate gotta be better than the pissing rain n cold though.
Good info 👍
nice one thanks
Hi, do you know if it’s the same on a 2014 transit custom and if the FET can be reset using forscan?
Hi i have ford Ranger XLT 2014 4X2
The problem is i replace the original hallogen bulb with Novsight N60Led lights 200w at first it goes well after fews days high and low went out. I tried to reset it with scanner after few days it went out again
I had the problem with a burned bulb on the driver side. I changed the bulb but still did not work on low beam, only high beam.
Went to service and while trying to delete the low beam error and do resets, they also broke the oposite side low beam, so now low beam is not working on both sides and the errors can;t be deleted.
Rest of lights works, high beam, positions, projectors, signals.
I’ve had one with no low beams and the reset procedure did not work. New bcm was required
@@mrautoservices7354hi, do you know if the same can be done on a 2014 transit custom? And can it be reset with forscan?