Replace & Upgrade the Cooling Fan Clutch on 2000-2006 Chevy GMC Truck Suburban Tahoe Yukon & Similar
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Doing a repair or project?? Want to be part of a Friend's Edition Episode? Interested Subscribers should contact Rob at RM@Axlesgarage.com Absolutely NO-EDITING skills required.
Severe Duty Fan Clutch: amzn.to/2WAd6v0
Trim Tool Set: amzn.to/3zv5uIN
Trim Pry Tool: amzn.to/38qpIY9
Support the Channel & Visit our Amazon Store for links to the products we use in our videos: www.amazon.com/shop/axlesgarage
Instagram: AxlesGarage
Twitter: @robmirabile
Facebook: @axlesvideos
Don't forget to check out AXLE'S KITCHEN
Instagram: AxlesKitchen
Twitter: @AxlesKitchen
Facebook: @Axle'sKitchen
Video Recorded with Canon Vixia HF R800 here: amzn.to/2C8QLo9
Wide Angle Lens: amzn.to/2BQYSdh
Extended Run Batteries: amzn.to/2H1XLaa
Disclaimer
**This channel is for entertainment purposes only! We here at Axle's Garage are hobbyists, not professionals. Do not do what we do. Do not take our advice. We are not professionals. Our automotive, home, cooking, outdoors, reviews, project content, rants and vlogs are just to document what we do, how we try to figure it out, and what result we have. Our techniques often fail and we try to demonstrate that as well. The methods we use may be completely wrong and/or dangerous. Please seek professional help with anything and everything and do your own due diligence (research). Home projects and DIY repairs can be extremely dangerous. We are not responsible for any loss of life or limb or property. DO YOUR OWN RESEARCH. THIS CHANNEL IS FOR ENTERTAINMENT PURPOSES ONLY!**
Axle's Garage is an Amazon Influencer and a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Thanks so much for the advice on removing the fan from the engine. I used a c clamp to create tension . Worked like a charm..wish i would have watched this first..would have saved 45 minutes.
Morning sir I've been a subscriber of your channel for years and I can't thank you enough for your years of service and taking time to give back to people around the country and world thank alot axel.
Thank you so much for the kind words. It is very much appreciated.
I agree, I never heard my Clutch Fan click on & off in my 2002 Blazer ZR2 but, it was always sucking air & would never stop.
I'm still getting 16mpg around town. Basically the sticker mpg for 2002 in 2023 w/ 300k miles. Guess it's working partially. Waiting on my Severe Duty Fan Clutch to arrive.
After sitting for a few days it had a little resistance but, I couldn't spin it freely or it wasn't locked up.
Mine was getting above 210° just towing a small 5x9' utility trailer down here in very hot SE Texas around Houston.
It turned out to be very noisy but gave me the extra flow I needed for my AC to work more efficiently
I really enjoyed this episode! And I look forward to more from a fellow New Yorker.
Thank you
@@AxlesGarage How do you feel about converting to electrical fans?
Great explanation and camera work. Plus, clamp tip on belt is good idea. Thanks.
Have a similar problem on my 2003 Suburban with rear air. The fan does not spin freely but is difficult to move like yours. However, there is some play in it and never changed (200,000). Recently replaced expansion valve, compressor, drier, and orifice. Water pump and thermostat replaced earlier.
Air good but could be colder so someone said check your fan clutch and believe it’s in locked position since never stops spinning. AC on it's on. AC off it's on. Good point and hard to diagnose since you don’t know how its acting while driving.
Also explains why my heat takes a while to get going in winter. The fan clutch is always blowing.
Changing mine.
Definitely worth the gamble, especially after you did all the other work already
Thank you. Heat and air better.@@AxlesGarage
clamp tip on belt is not a good idea. use the tensioner. it's way easier and guaranteed to work 100% of the time
“thermo-viscous”..., whoa, whoa..., take it easy...,
I can’t digest those big words..., sheeeesh...!
Hahaha...
Great video, I will be doing this very same job, and learned some great info., from you...
You and your family have a great vacation...
Thank you.
Thanks for watching
It WORKED. No special wrench. Used the same clamp as yours. Mine is the long one. Didn't think it would fit, but the alt is higher. So put the clamp on and, whack...offf it came. Thanks a BUNCH.
Glad to help
Yes you can it works the same I have an 04 yukon and to stop the fan I used a long extension and it stopped that's how I knew my clutch was bad
Thanks for the tip
Hello there, from Puerto Rico! I am subscribed to your channel and enjoy it very much. I would suggest that the last "wack" on the tool upon reinstalling the fan is unnecessary due to the rotating direction of the engine, which will complete the tightening. Keep up the good work.
Thanks for the tip
How I personally tested mine was I got the truck really hot, drove it, etc... Then parked it, shut it off, and tried to move the fan. The fan moved with little effort telling me it wasn't locked in even though my truck was close to 210 degrees on the coolant gauge. Should be pretty much locked at those temps. I also let it idle and waited for my air conditioner to get warm and did the same test, same thing, the fan moved as if the engine was still cold
Great idea for testing.
Great video timing was very educational thank you
Thank you
I have a 04 Burban and it's doing the same as you saying when it gets hot I got full of ac I'm finna change it and see
My 2005 GMC Yukon overheats it doesn't do it for a while when I first start of a morning but at about midday it starts overheating pretty bad I hear the fan clutch come on but it still doesn't cool it down so I'm not sure if it's the antifreeze breaking down or if it's the water pump or the fan clutch just not as powerful.
Badass video! I have a gmc denali aswell and it has those same symptoms exactly 💯. Going to fix it tomorrow!
Thanks for watching
I had the same issue. Check your AC fan belt, mine was a little loose. After changing that I could refill it correctly and it blows real cold now.
Thanks for watching
I did this last summer on my 02 Silverado 1500 and it was not easy
an often overlooked repair
4get bout it 😂 ..... This video was helpful 👌
hahaha Glad to help
Perfect very good explanation thank you !
Glad it was helpful!
Loved the video but one question. How loud was it after you installed this particular fan clutch? Ordered the same one after watching this video so I'm just curious, Thanks 👍
Very Loud, almost to the point of annoying. BUT the added airflow through the old AC condenser made the AC perform well and never gets hot like it used to with AC on high, idling, on a hot day. I'll take the noise for the better cooling.
Excellent video 👍🏿
Glad you liked it
i recently changed the fan clutch on my 2004 tahoe... I am certain the old clutch was bad. However, now i have another concern... when i first crank the vehicle the fan will run (even at a cold start). It will also continue to run for an additional five minutes (or a mile or so of driving through the neighborhood).
Could you tell me if this is normal or if i possibly have a new clutch that is bad - is there a break in period?
I have just subscribed, you're great sir!
Thanks and welcome
Great vid!
Thanks for watching
Great video boss after you changed the ac work on traffic bumper to bumper did you get cold air or on parking and I ordered the same clutch form amazon thanks again 👍
Yes, I got much better cooling at low speeds, however the fan is quite a bit noisier. It's really just a band-aid as a new condenser is whats really needed.
you now will have to replace the belt. you stretch it when you do crap like that.
When putting in heavy duty fan clutch do u hear a wind noise
Yes, a shit load of noise, but it works
What brand part# clutch did you use?
Link in description
Hey I loved the video. I was wondering how is it holding up
Loud, but helping with the ac
@@AxlesGarage thanks
going with the same one in my work truck,hope it hods up
Yes it will, but it is a little loud.
You put the wrong one on. The larger diameter heavy duty thinner one is for a non tow package. The one you took off is the severe duty for tow package and fan pitch. Runs 80-90 % vs 70-80 % and engages sooner.
Thanks for watching
My 02 Silverado blow cold air when moving soon as a hit a stop light it starts blowing warm would this be the issue? I start moving again and a/c gets cold any help?
Could be not enough airflow across the condenser, but it could also be a clog or improper charge
@@AxlesGarage yes I also barely getting any air flow from my front vents to the cab but other floor vents and windshield throw great strong air thanks for the response appreciate it
Long island heats been crazy my tahoe on a hot day with ac on idling doesn't overheat but goes slightly past 210 and ac isn't cold at idle. Did this fix the problem does it now have cold ac at idle and run cooler
It definitely helped, but not necessarily fixed. Runs cooler and ac performs better... the only fix I believe is a new condenser. Downside is the clutch/fan noise is loud
@@AxlesGarage I agree did the job I don't mind the fan noise.. temp does not creep up ever now and ac is def colder at idle. Electric fans would be the fix
@@walkertexas6405 The dual electric fans for this model are also loud when they come on.
Hows the Hayden clutch doing? Does it affect your mileage at all because ive read where people said they stay engaged most of the time and kills gas mileage just curious im trying to decide which to get
It's loud and annoying, but the AC works great, never gets over 200 degrees even idling in the hottest summer days. We just towed a Wrangler on a Uhaul car trailer 400 miles through some mountains as well and averaged 12+ MPG.
Hayden makes great fan clutches. I immediately noticed my air conditioning blew colder after I replaced mine.
@AxlesGarage Did it affect your acceleration at all? I heard the HD or severe fan can rob horsepower.
@2:56 lol he got the water melon up in there. lol
LOL, never noticed that
No especial tool need for this job the alternator has the hole to put the pressure on it but your technique work but the one l am
Talking about is way more easy
What I meant in the video was, the correct way to remove, has a tool that goes on water pump 'pulley'
Man lol if u look 👀 u see on the alternator is little L hole u put L there and just twist and bum free lol is super super easy lol
Great tip, thanks for the comment
So the nut is not reverse thread! Everyone has been telling me my 2001 suburban fan clutch nut is reverse thread
None of my GMT-800's have been reverse thread. I believe some models may have had fans that spins counterclockwise, those do. If you look up fan clutches you will see.
Pro tip on knocking the fan clutch loose. I use a long hammer tip on my air hammer. Disclaimer: BE FREAKING CAREFUL! I've been a mechanic for 35 years, and I know how to do it.
Great tip
You should NEVER put any kind of "lubrication" on the threads of the fan clutch center hub.... ESPECIALLY if it is powered with a GM / Mitsubishi Duramax diesel... the Ford PowerStroke or the Dodge/Ram Cummins diesels... why?..... because they shut of "Hard" due to their high compression ratio's and if the fan clutch hub nut threads have lubrication on them, they will not hold the torque and "can"... be "shocked" loose, and can actually screw themselves off and into the radiator.... you Don't want that to happen. With the gas powered versions, there is not as much risk of that happening, but if one "insists" of lubricating the fan clutch hub threads... then, use a "Dry" type lubricant.
In fact I would recommend some loctite on it rather than lube
Thanks for the info
@@AxlesGarage.... Thanks for your reply.. you're very welcome. Like your channel and did subscribe to it.
@@AxlesGarage You may get away with not torqing those fan bolts (17 Ft Lbs), but your asking for trouble not torking that Clutch nut at 41 Ft Lbs. I know, its expensive, but the one O'Reilly"s sells, a 4 in 1 for $37 has a 1/2 drive cutout for a 1/2" drive torq wrench...that's a pretty good deal...it's the Powerbilt/Alltrade wrench...
You talk about way too much than what I'm looking for. Just get to the point.
Yes, we talk here. Welcome to the channel