Ketchup’s World Episode One - Civic block heater

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ต.ค. 2024
  • ***
    Go to Advance Auto Parts for the block heater for this generation of Honda Civic
    advanceautopar...
    ***
    In this episode of Ketchup’s World we install a block heater into a 2006 Honda Civic 1.8 L manual transmission car.
    Also included are simple instructions on refilling the coolant system.
    In Canada it gets cold, especially inland. A block heater can prolong the life of your car. That first few minutes of running your car with cold oil can be harmful to your engine over time.
    If your block heater is connected to the cooling system, this also means that your cabin will warm up sooner after you start your car.
    *Note: I didn’t say one instruction in the video so I will share it here. When you see the coolant rise after the cabin heat has been on and hot air is coming out of the vents for some time, and no air bubbles coming out, this is your cue that your coolant system is bled. You can turn your car off and cap the radiator. It rises because the engine is warming up and heating up the coolant. Liquid expands when it gets hot. You want to stop here and later check your coolant resivior level and make sure it is between the min and max level.
    Here is the link to where I found the block heater install instructions:
    www.collegehil...
    Thanks to Paul for helping with the cinematography.
    Music credits:
    Eastern European Union of Metal Musicians
    Vladimir Likovich
    Zbignev Basakov
    Lula Perkuska
    Pavel Sosieski

ความคิดเห็น • 39

  • @epartee
    @epartee 2 ปีที่แล้ว +4

    I just finished the install on my 2007 Civic - Thanks for putting this video together, it helped a ton!

  • @AllistairTenpenny
    @AllistairTenpenny 2 ปีที่แล้ว +4

    Didn’t know where my block heater was, thankyou

  • @geofflopez8482
    @geofflopez8482 3 ปีที่แล้ว +1

    doin the install today on my 2011 odyssey with 210k kms. feelin confident. thanks bud!

    • @andrewdegenhardt
      @andrewdegenhardt  2 ปีที่แล้ว

      That’s great. This is the idea, do what you need to get some confidence and get it done!

  • @michaelhastie7324
    @michaelhastie7324 9 หลายเดือนก่อน +1

    Thank you for this video Andrew. My son Andrew was sold a POS;, Civic this summer. He paid far too much for it and I will have to go to small claims court to get some money returned to him. ((I needed a space to vent a bit.... Thanks Again.))

    • @andrewdegenhardt
      @andrewdegenhardt  9 หลายเดือนก่อน

      Oh no, well i hope it turns out ok for you

  • @Mandirigma420
    @Mandirigma420 9 หลายเดือนก่อน +1

    much appreciated best vid

  • @rcruz6025
    @rcruz6025 3 ปีที่แล้ว +1

    Thanks for the video ✌🏼

  • @peacocksisters3849
    @peacocksisters3849 ปีที่แล้ว +1

    Thanks bro

  • @MatthewDueck
    @MatthewDueck 9 หลายเดือนก่อน +1

    Hey Andrew, thanks for the video and especially the little tricks of the trade.
    is there a way to remove the "block heater bolt" without spilling coolant? i dont have a garage, so ill have to try this outside.
    thanks!
    -matt

    • @andrewdegenhardt
      @andrewdegenhardt  9 หลายเดือนก่อน

      Hi matt, no there isnt a way. You have to drain it. Drain from the proper location first, the coolant drain plug, then more will come out when u remove the “placeholder” for the heater

    • @unnikrishnanraveendrannair5408
      @unnikrishnanraveendrannair5408 8 หลายเดือนก่อน

      @@andrewdegenhardtso is it possible to remove that bolt for the block heater & it will spill out the coolant out right, so after the installation fill it back & bleed out the air bubbles, will that work without draining the whole coolant from the system

    • @andrewdegenhardt
      @andrewdegenhardt  8 หลายเดือนก่อน

      @@unnikrishnanraveendrannair5408 i guess so, but the purpose of the drain plug is to get a relatively clean drain. It drains in a way that is easy to catch. If you drain from the other block heater bolt, you may have a mess. I recommend draining from the drain plug first

    • @unnikrishnanraveendrannair5408
      @unnikrishnanraveendrannair5408 8 หลายเดือนก่อน

      @@andrewdegenhardtso, if I tried to directly install the block heater plug directly by removing and installing it without draining from the radiator plug, cause any issues, like even after i fill the coolant back and idle for 15 minutes wont remove the air bubbles, I don’t know thats why i am asking

    • @andrewdegenhardt
      @andrewdegenhardt  8 หลายเดือนก่อน

      @@unnikrishnanraveendrannair5408 it wouldn’t cause any issues that i can think of besides a complete disaster when the coolant drains out of the engine block. It will be messy and difficult to catch the fluid. Honestly you wont be saving any time by trying to drain from the block heater plug. You’ll just make a mess.

  • @snoozepop
    @snoozepop 8 หลายเดือนก่อน

    Can that Tephlon tape take the heat of the motor? I didn't use any. The plug didn't have any.

  • @tristenrempel4055
    @tristenrempel4055 3 ปีที่แล้ว +1

    would this work for my 2008 honda civic?

    • @andrewdegenhardt
      @andrewdegenhardt  3 ปีที่แล้ว

      8 generation civic: Model years: 2006-2011;
      Yes it will

  • @whoknowstube5212
    @whoknowstube5212 3 ปีที่แล้ว

    Thanks a lot brother
    Q, is this car 2006 civic if yes Can you please direct me where and number of the blockheater tnx.

    • @andrewdegenhardt
      @andrewdegenhardt  3 ปีที่แล้ว

      Yeah 2006 civic, i just went to Bumper to Bumper and bought it there. Or go to rockauto.com and order it online.

  • @crazyeyes1533
    @crazyeyes1533 3 ปีที่แล้ว

    what's the part number on your kit?

    • @andrewdegenhardt
      @andrewdegenhardt  3 ปีที่แล้ว +1

      I don’t remember but you can just go to any parts store like NAPA or Bumper to Bumper or online at rockauto.com and find the part. You can also go to the dealership but u will pay more.

    • @crazyeyes1533
      @crazyeyes1533 3 ปีที่แล้ว +1

      @@andrewdegenhardt thank you, I ended up just getting from the dealership, an FYI the pt# is 08T44-SNA-302. Thanks so much for posting your DIY video!! Much appreciated, will come in very useful this weekend when installing mine!

    • @andrewdegenhardt
      @andrewdegenhardt  3 ปีที่แล้ว

      @@crazyeyes1533 great i hope it goes well for u

    • @rotaxtwin
      @rotaxtwin 9 หลายเดือนก่อน

      Helpful video. I had no idea where the block heater was located, this is better than I imagined. Still kinda pissed off that mine failed, it's- -35 this weekend and I'm not even gonna try and start it in this.

  • @srikanthbreddy1611
    @srikanthbreddy1611 2 ปีที่แล้ว

    Can you do 2018 accord or civic

    • @andrewdegenhardt
      @andrewdegenhardt  2 ปีที่แล้ว +1

      Should be able to
      You just need to find where the block heater will go

  • @mikeass242
    @mikeass242 2 ปีที่แล้ว +1

    never fill antifreeze without the car running the water pump help push the air through and out

  • @mikeass242
    @mikeass242 2 ปีที่แล้ว +1

    ontario car suck balls to work on so much rust from all the salts used on the roads the government should subsidize car bills

    • @andrewdegenhardt
      @andrewdegenhardt  2 ปีที่แล้ว +1

      My father in laws car is from Ontario and the rust is noticeably higher than our Alberta vehicles. I did an oil change one day and the amount of rust on the drain plug was concerning

  • @mikeass242
    @mikeass242 2 ปีที่แล้ว

    just to let everyone know antifreeze does not kill your pets anymore they changed the chemical compounds

    • @ndee1472
      @ndee1472 ปีที่แล้ว

      This is NOT true. I work at a vet clinic and can confirm it still can