I'm really glad I found this review. I was seriously considering buying this machine until the part where you talked about having to change settings to use the generator part. I see being 50 or 60 feet away from the truck, welding then needing to grind something and have to walk back to the truck to change a setting and back again to change it back. Thanks for the review.
I’m glad your having good luck with yours. I bought one 3 months ago and it had the worst arc quality I have ever ran into on a engine drive welder. Didn’t matter what rod I used. Sold that thing after using it three times. Running an ESAB rouge180I off a 9000 watt generator now. A world of difference in arc quality, runs smooth as butter.
I never have the chance to own one of those. But I do own a little hobart 140 ... and men!! It's a very good machine ! Get the job done , but my dad used hobart since we used to lived in mexico... it is an awesome brand
that machine is the best,out the box ,pull running , tried with 70/18 rod .I even had lower the to 110 because it was to strong to weld 1/8 angles.bought it in cyberweld for $2300 without the cables
I have the old ac version of this welder very dependable. Will not burn 6010s. It has not failed me yet just run ethanol free gas and change oil and plugs. Starting to Peter out though gonna replaced it with dc version
The most annoying part I found with my old 145 was having to turn the dial up to use a grinder. Which will really make you cuss when you’re on top of something like a round baler and have to get off to reset the breaker
With this machine you would be using 1/8 ROD. 6010 ROOT pass 1/8" and then a 7018 FILL and CAP passes with 1/8". This welder CAN handle 5/32 but it would probably run a little cold and you might not get enough fusion.
Hi I’ve got the same machine. I’m goin on 2yrs with its and it’s been used less than 5 times still new. Problem is now the engine starts but no power or arch?? Any advice would help
Like the fact that a man is able to make a video with out dropping the F bomb every other word. God bless
Solid real world review. Looking to pick one up very soon for the side jobs.
I understood every word you said. You covered my questions very well. Good job!
I'm really glad I found this review. I was seriously considering buying this machine until the part where you talked about having to change settings to use the generator part. I see being 50 or 60 feet away from the truck, welding then needing to grind something and have to walk back to the truck to change a setting and back again to change it back. Thanks for the review.
I’m glad your having good luck with yours. I bought one 3 months ago and it had the worst arc quality I have ever ran into on a engine drive welder. Didn’t matter what rod I used. Sold that thing after using it three times. Running an ESAB rouge180I off a 9000 watt generator now. A world of difference in arc quality, runs smooth as butter.
Mine has been great
I haven’t had any issues out of mine. I hate that you didn’t have any luck with yours. What polarity were you running?
@@wtwelding1463 dc + the hobart champion 145 runs my miller211 and Lincoln pro mig 180 well and it stick welds great also and runs 7018 well.
@@wtwelding1463 I have 75ft lead on mine both negative and positive
@@brents927so these machines are ok to switch leads and weld off the negative?
I just ordered this Welder. Thanks for your input it helped me make the decision.
Seriously looking to buy one buddy,thanks for the video!
I never have the chance to own one of those. But I do own a little hobart 140 ... and men!! It's a very good machine ! Get the job done , but my dad used hobart since we used to lived in mexico... it is an awesome brand
that machine is the best,out the box ,pull running , tried with 70/18 rod .I even had lower the to 110 because it was to strong to weld 1/8 angles.bought it in cyberweld for $2300 without the cables
My great grandfather worked for Hobart i got to tinker with quite a few older Hobart machines
Glad you put this video up I honestly go for the opinion of a good ol boy than some “pro” on an ad or whatever i think im gonna get one these
Awsome i was looking in at one just now ima go ahead and get it
Thanks man I’m starting up on a budget I’m looking at one these
It’s perfect to get started with. That’s kind of my plan so I can use it to build up and buy a bigger one.
Thanks for your honest opinion!
Thank you :)
I have the old ac version of this welder very dependable. Will not burn 6010s. It has not failed me yet just run ethanol free gas and change oil and plugs. Starting to Peter out though gonna replaced it with dc version
When welding does the power go down or does the motor get reved up?
Thanks for your review
Thanks👍🏻
The most annoying part I found with my old 145 was having to turn the dial up to use a grinder. Which will really make you cuss when you’re on top of something like a round baler and have to get off to reset the breaker
Yes I agree that is very aggravating. Luckily I have been fortunate to have someone within yelling range to turn the dial lol.
Does the stinger go on the positive? Or would the ground go on the positive
Depends on how you want it. It has the capability of being ran both ways.
So you do recommend one for side jobs and things? I’m trying to start doing a few and I want to run 7018 1/8 and my other small welder can’t run it.
Yes I do! It’s compact and priced good for what you get.
Ya I have to use a flashlight to see the fuel level
How thick of a pipe do you think it can weld?
With this machine you would be using 1/8 ROD. 6010 ROOT pass 1/8" and then a 7018 FILL and CAP passes with 1/8". This welder CAN handle 5/32 but it would probably run a little cold and you might not get enough fusion.
did you have to make your own leads?
I had some leads already. When I got it it didn’t come with any.
When I am welding with my Machine it stop welding like you pick your rod up do you no what can be Causing that problem
Pull the top cover off and check your wire connections on everything. Anything other than that I wouldn’t know.
I have the same welder, have you ever tig or run an aluminum spool gun with it?
I have not
I've ran a miller 211 and a Lincoln 180 and they can run a spool gun
Hello , do you know what carburetor I need for this?
I do not sorry.
Have you tried to use a 140 mig welder on it
I’ve used many machines on it. It runs every thing I’ve hooked to it so far
Will this run dc rods I’ve noticed some say AC. I run 6011 and 7018 most of the time
Yes. It’s a dc current welder.
How many days did you 🏃 it to break it in?
It recommended running for 10hrs and changing the break in oil
Hello can I run a 161 miller off a Hobart 145 thank you
What amperage is it? 120/240?
@@wtwelding1463 is a 240
If it is a 50 amp then yes it should. The 240 receptacle is a 240v/50amp.
@@wtwelding1463 thank you
Hi I’ve got the same machine. I’m goin on 2yrs with its and it’s been used less than 5 times still new. Problem is now the engine starts but no power or arch?? Any advice would help
what cable number do you use
1/0
What grade fuel do you use
E85 non ethanol