@@workspace-gi4pw that might be a security problem with a certain device... but generally router can either be used as a router or as a wifi extender, but not both at the same time... plus i didnt connect any wire with my router when i used it as a wifi extender... if you are still concerned may be write a custome firmware like openwrt or buy a simple wifi extender, its cheap these days
Hello, Thanks for this - i'm facing one problem , i'm using a router provided to me by a network in GCC, on the video 2:19mins - i cannot see the setting Enable Sending of Free ARP packets option - other options are there. Please tell me will it work without it or if i need to do anything else. Thanks
@@TechnicalHakim yes please , it’s working now but I feel the settings can be improved as I’m experiencing unstable connection and not sure if 5G is working, although this router is more powerful but my D-Link extender is doing a better job. How to reach out to you, do you have WhatsApp ?
yes you can. you can also setup your toto-link as secondary router to extend your range and so on. For that, connect lan/ethernet cable from your huawei device LAN port to totolink WAN port and setup toto-link. Also, if there is repeater mode on your totolink then your can extend your connection range wirelessly.
thanks for your query. we cannot connect these huawei router/onu wirelessly as there isn't any option available like wireless extender mode setup or repeater mode setup. Incase of any further query related do let us know. Thank You !!!
I did reset my HG8546M Huawei Router, and the SSID Name is now : WirelessNet same as shown in your video. But i dont know the password to access it , the default password behind the router is not working. Pls help me know the default Password after Reset. And i want to make this Router as my secondary one wirelessly.
sir I want to configure the same but my lan is working but wifi connected but not working with my secondary router hg8546m, please guide me what is the mistake?
please make sure you have disabled dhcp server on your secondary and verify the ip address assigned to it...enable lan, configure wlan and thenplz check once
does it work while connecting via wireless/wifi or via lan/ethernet cable in you computer? if wireless is working on your computer and not on your mobile then verify wireless band, channel, static ip assignments in your mobile, dns modification in your mobile, or vpn services running, make sure you verify these and try once. Also, please go through the step wise processes and follow the instruction shown in video for your ease. hope you got it. thanks for your query
Bhai mera pas same yah wala router hai meri ISP sy mujy mila hai ab mujy wifi ka signal zada karna han to mein olx py router dak raha tha to mujy ise tra ka router mil raha hai or yah dono fiber wala router han WAN ka point nhi hy is my kya yah same router wifi extender ban sakta hai .
yes it can be made range extender for that you need to establish LAN connection between primary router/isp provided and the router you have with. But if you are thinking to buy then better go for DSL routers [eg: tplink, netis, tenda, asus, mi, lb-link, d-link, bdcom or any others for range extender or secondary router.
you can get the ip address of router from router backside, another way is you can know IP address from your connected devices and see the gateway IP, it should be of the router IP. another way is you can know IP address of repeater devices from primary router connected devices list. log into your primary router and search the option connected hosts you will get to know the IP address of all the connected devices from there. verify your repeater device and go your way. thanks for your query. I hope you got it. incase, any related query do let us know will revert.
if you want to make your huawei onu/router secondary then connect lan/ethenet cable from primary router Lan port to secondary router any one Lan port and follow the instructions as shown in this video. Hope you got this. Thank you.
Hi! I have HG8326R it doesn’t have the option of Lan port work mode. I changed the other settings according to the video but there is no internet connection
try once resetting your router and login from admin or root privilege user and try the instructions shown. and after setup, connect the ethernet/lan cable from your HG8326R any one lan port to primary router's lan port to browse internet. hope it works
thanks for your query, for mentioned onu there is not the availability of setting it up as secondary router wirelessly, you need wired connection to make it secondary. thanks.
Good to hear, thanks for your query. as we have configured it as secondary router it's for sure that it won't match with your source internet speed there will be slight difference between it and yes you are right the mentioned onu router's maximum wireless transmission capacity is 300 Mbps.
try once resetting your router and login from admin or root privilege user and try the instructions shown. and after setup, connect the ethernet/lan cable from your HG8245Q2 any one lan port to primary router's lan port to browse internet. hope it works
bro I am trying to connect Huawei MODEL NO: HG8546M as primary router and D-link- model no: DRW-M960 AS secondary router wireless extender should I have to open bridge WAN first in primary router or not to setup.
no it's not necessary that you bridge wan in primary router if internet is already operational from it. only at begining Once doing wan connection setup, you need to bridge ssid of primary router ssid and then You just need to lock found ssid of primary router on secondary routers if setting it up as wireless extender.
you can't use it as repeater because of features unavailability on it, instead you can use it to extend your range or use it as secondary router or you can use it as repeater in the way that perform the same configurations as shown on video on your hg8245w5 router and keep the ssid name/key same as of primary router. This will then work as same wifi setup for your devices and you do not need to connect to both router separately though they are configured separately.
in Huawei ftth onu, you might not find bridging connection type but you can make it as bridge router by doing the same as shown. Connect your Huawei onu one of LAN port with your primary router or your Arris router's LAN port. Make sure lan port is enabled and internet is working from your primary router's lan port, and then Login to Huawei onu router and enable lan and disable dhcp, it will work as bridge router. Refer to the tutorial for configuration step on Huawei onu. thanks for your query.
thanks for your query. we cannot connect these huawei router/onu wirelessly as there isn't any feature option available like wireless extender mode setup or repeater mode setup in these models. Incase of any further query related do let us know. Thank You !
This is for Huawei ONU...please test if it works. We donot have meanwhile ZTE ONU on stock so that could show the process. Once it is available we will try on it too. --------------------------------------- by using Telnet try it From GPON to EPON: login (root admin) su set upport mode 2 set optmode mode 197 quit reset ================================== I tried HG8347R and HG8346R, converting is done by telnet as follows: From EPON to GPON: login (root admin) su set upport mode 1 set optmode mode 196 quit reset From GPON to EPON: login (root admin) su set upport mode 2 set optmode mode 197 quit reset ======================== Thanks for your query.
if it's unused, make sure to reset it to take it to factory default settings and then login your onu setup wan as bridge mode and disable dhcp server, enable lan ports and save the settings. then connect lan cable from primary routers lan port to your cpe tewa's lan port and check your internet connectivity once after rebooting the cpe device after configuration save and setup. hope it works. Thanks
@@gauravadhikari6672 used means are you using it as primary router and want's to setup it as secondary router? or if it's used and you have switched to another isp and wants nt onu to use it as secondary then make sure to reset it to take it to factory default settings and then login your onu setup wan as bridge mode and disable dhcp server, enable lan ports and save the settings. then connect lan cable from primary routers lan port to your cpe tewa's lan port and check your internet connectivity once after rebooting the cpe device after configuration save and setup. hope it works. Thanks
try once after resetting and check..if can't connect from that password then please do check the ssid key mentioned backside of your router. hope you will get connected and then try logging in and follow the instructions. thanks for your query.
Red light blink case: you haven't connected patchcord connector of fiber in this fiber/gpon/epon onu/router, so it's blinking. it's the signal or identification of loss or breakage of fiber. in this case we aren't using fiber cable instead we have used this router as Secondary router with Lan/Ethernet cable connection to lan port. So, let it blink if you just want it for secondary setup. Next, to login this onu after setup as shown. it's in bridge mode and dhcp is disabled. so, to login router for ssid/wifi credentials modification or etc. make sure you know which ip is this router assigned with from your primary router's connected device and try logging in from that ip. Also, you can login from another way is connecting lan cable to your laptop/pc and assign static ip of same range of router's gateway. you will easily login from that assigned gateway ip too. Thank You.
thanks for your query. the process is same almost for other gpon onu too. connect internet cable to lan port and disable dhcp and configure wlan setting and then test and browse the connectivity. sorry for mentioned model details, as we haven't on stock with us to show, Thank you.
trying enabling lan from wan connection first and then from lan port. If still it's not working then try resetting your router and login from telecomadmin/admintelecom user/password and then follow the instructions.
Hello, thanks for the video. I have tried this but when connected to the main modem it kills my IPv6 connection. I have to unplug it and restart my main modem to IPv6 start working again :/
to login into your secondary router make sure you know the ip address assigned with from primary routers connected devices list or dhcp lists/client lists. once you know you can login into it. another way is that you can manually login to it with the help of mobile or your laptop by assigning manual ip to the interfaces.. hope it helps
@@lovegaming6763 after doing the configuration as shown in the instructions, connect the lan/ethernet cable from yours primary router lan port to this router lan port and start browsing internet. thanks for your query
thanks for your query. you need to setup your tplink wireless connection type as bridge mode and select the network you want to bridge. To bridge your TP-Link router wirelessly, here's what you need to do. Open your router's default gateway and enter your username and admin password. Head to “Wireless”. Select “Wireless Settings” and also enable “WDS”. Hit “Apply” and let your router reboot. for your ease go through this you will find the procedures. www.tp-link.com/us/support/emulator/
Mine says wireless net as ssid. But I don't know the password. The password doesn't match with the one as the one which is on the back of the router. Please help
@@TechnicalHakim Hi use lan wire to login at your default ip under your router or use the reset button (press the reset button until all leds stop and start)
trying enabling lan from wan connection first and then from lan port, or enable lan from LAN and then goto WAN- connection and enable also from there and apply settings. please do let us know incase of any query.
@@robinsmehta follow the instructions shown, you will find it make sure your router/onu is in default configuration mode. if not try resetting if there isn't any configuration then and try. incase of query related let us know. you can also connect with us on facebook.com/technicalhakim thank you.
no internet accessibility should not be the reason for your router control locally.... you can still access your router with login credential's and modify the configuration and once you are done with the configuration internet should work....make sure you have provided source/method of internet connection to your router either via wired or wireless in some cases different than this onu. thanks for your query.
see the ip address mentioned behind/backside of onu and try logging from that ip or you can assign the static ip of same range of onu in your pc/laptop and can access it from respective ip gateway...try once and let us know incase of any query related
login page does not appear on that ip address or other ip's (tried with ip on back of router also). it also shows wirelessnet as ssid and pwd:eeeeeeee. What can be done?
thanks for your query. Try resetting once. if wirelessnet ssid or Huawei onu default ssid is displayed connect to it and what ip/gateway router is assigned with and try logging in from that ip. anotherway, Also you can manually set ip to your ONU router ethernet connecting to pc, for that connect lan cable from onu's lan port to your Pc or laptop ethernet port and assign static ip to ethernet adapter of your pc/laptop of same network range. for eg: go to ethernet properties of your pc and right click on properties and click on ipv4/tcip and click on use the following ip: ip: eg: 192.168.100.10 or try [ 192.168.0.10] subnet mask: 255.255.255.0 [same] Default gateway: 192.168.100.1 or [192.168.0.1] ------------------- now, open any browser and try login from Default gateway assigned ip. i hope it might help you. incase do let us know if i can help any further. Thank you.
@@TechnicalHakim having a same prblm ..even i tried with ur things but didnt work..its same router and model number. But didnt went well it says took too long to respond and nothing
sir please help me i have huawei hg 8546m onu but after resetting from pin button it shows "SSID - Wirelessnet" and default password on back sticker is not working please help me what should i do??
@@Warcell The default username is telecomadmin and the default password is admintelecom. if it's not working then plz try once resetting factory default and try setting it up again, it will work if user/password isn't modified.
is it wireless onu or non-wireless onu? if non-wireless you cannot perform wan setting directly on it, if not then you can proceed for the same if there is lan ports
thanks for your query. we cannot setup/connect these huawei router/onu wirelessly as there isn't any option available like wireless extender mode setup or repeater mode setup. Incase of any further query related do let us know. Thank You !!!
we can setup it via ethernet by assigning ip address of router's gateway ip and login to router homepage and follow the instructions shown. hope you will get it. plz do let us know incase of any query.
thanks for your query. wireless repeater or bridge mode isn't available in this onu so we can't set up it as you are querying. instead we can use it as secondary router or wireless extender configuring as shown by connecting Ethernet cable from primary router to this Huawei onu lan port. hope you got it. thanks
make sure you have done with this things on your Huawei ONT: enabled lan settings, disabled dhcp server and connected ethernet cable from your primary router to this huawei ont router which you want to make it work as secondary.... follow the steps and instructions, i hope you would get it...if still not do let us know incase of any queries related. thank you.
Once you are done with setup, the next time you want to login to your onu you need to connect through your pc/laptop and assign static ip on Ethernet and can easily login...or can also login if you know what ip it has been assigned with from primary onu/router. default username: telecomadmin password: admintelecom Thank You !
@@madhavgautam1500 is it Nokia onu? if yes then reset it...try default login and setup as u need. you can find default login credentials from backside of your router/onu too.
okay, make sure it's (router)gateway ip or not then only you can access it..connect to your pc/mobile and from ip details you can get gateway ip from which you can access it..make sure andy customized firmware isn't loaded to your onu@@yourfavoritelyrics10
you couldn't connect wirelessly in this scenario in this ONU/ONT due to the unavailability of features and so on in this onu/ont. hope you got it. thanks for your query.
Works like a charm but once this is done the secondary router shows only the 2.4hz bandwith with a new SSID , the 5hz bandwith shows as the old SSID and password which is given behind the router itself
thanks for your feedback.....also to modify your wireless credentials make sure you modify it at the time of setup or can access it via your pc or laptop by assigning static ip to ethernet. thank you.
try once logging from this to access your onu/router webpage: user: telecomadmin pwd: admintelecom ----------------------------------- once after reset, check the backside of your router for default ssid name and key/password or password can also be in some onu: eeeeeeee hope it helps.
follow the instructions as shown, it will work definitely. Make sure you have connected Lan/Ethernet cable from primary router to your Huawei( secondary) onu/router properly and verify the lan connectivity once after performing configuration. It will work, incase of any further assistance related, do drop down your queries. Thank You !!!
if it's unused, make sure to reset it to take it to factory default settings and then login your onu setup wan as bridge mode and disable dhcp server, enable lan ports and save the settings. then connect lan cable from primary routers lan port to your cpe tewa's lan port and check your internet connectivity once after rebooting the cpe device after configuration save and setup. hope it works. Thanks
thanks for your query, it will work obviously, please follow the instructions carefully, if having trouble try after resetting the onu router, and login the onu and follow the further, please let us incase of any query related.
thanks for your query... as you are known that you have disabled the dhcp server on Huawei router..It works as a bridge Repeater or secondary router wireless extender. 1. You can access it via your PC/laptop by assigning the same range IP/ gateway of router given backside of router. 2. You can also login with ip it has been assigned with. To know the ip it has been assigned with, you need to login your primary router. From primary routers connected device list/client list/dhcp client list you can know the ip the Huawei router has been assigned, and then you access the router from that ip which it has been assigned. i hope you got this. .........
exactly what i was looking for... worked like a charm, thanksss
glad to hear... thanks for your feedback. keep exploring😍
@@TechnicalHakim i have not password of that back of my router what is password plz help i have just serial no
@@workspace-gi4pw not really, its just a configuration... the router handles it wi no issue
@@workspace-gi4pw that might be a security problem with a certain device... but generally router can either be used as a router or as a wifi extender, but not both at the same time... plus i didnt connect any wire with my router when i used it as a wifi extender... if you are still concerned may be write a custome firmware like openwrt or buy a simple wifi extender, its cheap these days
@@Bestofthebest9818
The default username is telecomadmin and the default password is admintelecom
Best of the very best guidelines
thanks for your feedback. keep exploring
Hello, Thanks for this - i'm facing one problem , i'm using a router provided to me by a network in GCC, on the video 2:19mins - i cannot see the setting Enable Sending of Free ARP packets option - other options are there. Please tell me will it work without it or if i need to do anything else. Thanks
yes it will work without it. let us know incase any assistance required related
@@TechnicalHakim yes please , it’s working now but I feel the settings can be improved as I’m experiencing unstable connection and not sure if 5G is working, although this router is more powerful but my D-Link extender is doing a better job. How to reach out to you, do you have WhatsApp ?
@@IMS13321 thanks for your query. can ping us at facebook.com/technicalhakim
Thanks bro.....best explanation I've gotten by far👍
Glad to hear it!..thanks for your feedback...keep exploring
Thank u very much❤️❤️❤️❤️❤️
You're welcome 😊
Thank you sir❤
welcome, glad it helped. keep exploring😍
Awesome thanks #Technical Hakim♥️♥️♥️
keep exploring, thanks for your feedbacks😍
Thank you brother❤
welcome...keep exploring☺
Thank you so much man ❤
welcome. thanks for your feedback. keep exploring
Wah 👍👍👍👍👍👍👍
😍
very informative video
. 1 suggestion please record the video in urdu language. thanks.
@@Nasir-b4z thanks for your feedback..keep exploring
I have Huawei HG8145C. It have less range i want to attach toto link with it . Is it possible??
yes you can. you can also setup your toto-link as secondary router to extend your range and so on. For that, connect lan/ethernet cable from your huawei device LAN port to totolink WAN port and setup toto-link. Also, if there is repeater mode on your totolink then your can extend your connection range wirelessly.
I want to use huawei modem as router and connect to ptcl modem I haven’t laptop can settings through mobile ?
if there is a wireless network ssid broadcast, connect to it and identify the gateway IP from your mobile wifi section and try accessing once
Can I use ont as a primary router? Only Ont?
yes you can make it as primary router if you have privilege's of device access and wan details setup provided by your service provider.
@@TechnicalHakim I tried, LAN works with internet, Wifi connected but no internet... but as secondary router works perfectly
please make sure you verify the wlan settings.
It is working for me, if I connect both routers wired!
is there anyway I can coonect Huawei router wirelessly?
thanks for your query.
we cannot connect these huawei router/onu wirelessly as there isn't any option available like wireless extender mode setup or repeater mode setup. Incase of any further query related do let us know.
Thank You !!!
I did reset my HG8546M Huawei Router, and the SSID Name is now : WirelessNet same as shown in your video. But i dont know the password to access it , the default password behind the router is not working. Pls help me know the default Password after Reset. And i want to make this Router as my secondary one wirelessly.
Try
eeeeeeee
eeeeeeee
Thanku @@faiqali9096
sir I want to configure the same but my lan is working but wifi connected but not working with my secondary router hg8546m, please guide me what is the mistake?
please make sure you have disabled dhcp server on your secondary and verify the ip address assigned to it...enable lan, configure wlan and thenplz check once
Work like charm, thanks !
glad to hear, thanks for your feedback 😍
Kia is seting sy hum huawei device sy koi or device chala sakty hy wifi ke cabel be lagani pari ge .?
yes we can
dai mobile ma chaldina compuert ma matrai chalxa ta kina ho testo?
does it work while connecting via wireless/wifi or via lan/ethernet cable in you computer?
if wireless is working on your computer and not on your mobile then verify wireless band, channel, static ip assignments in your mobile, dns modification in your mobile, or vpn services running, make sure you verify these and try once.
Also, please go through the step wise processes and follow the instruction shown in video for your ease. hope you got it.
thanks for your query
Bhai mera pas same yah wala router hai meri ISP sy mujy mila hai ab mujy wifi ka signal zada karna han to mein olx py router dak raha tha to mujy ise tra ka router mil raha hai or yah dono fiber wala router han WAN ka point nhi hy is my kya yah same router wifi extender ban sakta hai .
yes it can be made range extender for that you need to establish LAN connection between primary router/isp provided and the router you have with.
But if you are thinking to buy then better go for DSL routers [eg: tplink, netis, tenda, asus, mi, lb-link, d-link, bdcom or any others for range extender or secondary router.
Do we need to connect primary and secondary router?
yes we do
Sir what is the ip of ther router to log in in router page after making it repater??
you can get the ip address of router from router backside, another way is you can know IP address from your connected devices and see the gateway IP, it should be of the router IP. another way is you can know IP address of repeater devices from primary router connected devices list. log into your primary router and search the option connected hosts you will get to know the IP address of all the connected devices from there. verify your repeater device and go your way.
thanks for your query. I hope you got it. incase, any related query do let us know will revert.
sound ????
thanks for your query, the sound in this video seems low. i hope the instructions shown will take you towards your things to be done.
do it need to connet to lan?
yes of course we need to connect LAN cable for internet connectivity.
Maila main primary huawei router lai secondary bhanuna khojako. Tara bhayana.
K garnu parla bhandinu paro
if you want to make your huawei onu/router secondary then connect lan/ethenet cable from primary router Lan port to secondary router any one Lan port and follow the instructions as shown in this video. Hope you got this.
Thank you.
Hi! I have HG8326R it doesn’t have the option of Lan port work mode. I changed the other settings according to the video but there is no internet connection
try once resetting your router and login from admin or root privilege user and try the instructions shown. and after setup, connect the ethernet/lan cable from your HG8326R any one lan port to primary router's lan port to browse internet. hope it works
Same here😢
please refer to above comments and try. and let us know incase of related query
How to extend my huawei HG 8564M as a secondary router wirelessly...plz help
thanks for your query, for mentioned onu there is not the availability of setting it up as secondary router wirelessly, you need wired connection to make it secondary.
thanks.
Awesome, love it, worked for me but I can't get my source internet speed from it, this router is slow 300mpbs
Good to hear, thanks for your query. as we have configured it as secondary router it's for sure that it won't match with your source internet speed there will be slight difference between it and yes you are right the mentioned onu router's maximum wireless transmission capacity is 300 Mbps.
Sir, I have Huawei HG8245Q2 router and i followed all your steps but its not working
try once resetting your router and login from admin or root privilege user and try the instructions shown. and after setup, connect the ethernet/lan cable from your HG8245Q2 any one lan port to primary router's lan port to browse internet. hope it works
bro I am trying to connect Huawei MODEL NO: HG8546M as primary router and D-link- model no: DRW-M960 AS secondary router wireless extender should I have to open bridge WAN first in primary router or not to setup.
no it's not necessary that you bridge wan in primary router if internet is already operational from it. only at begining Once doing wan connection setup, you need to bridge ssid of primary router ssid and then You just need to lock found ssid of primary router on secondary routers if setting it up as wireless extender.
@@OpendraYadavanyway thx bro but I have already made access point to secondary router.
@@Rahul-Coding glad to hear😍👍️
I have also hg8546m router I freeze at obtaining ip address and Ethernet wire seems to be okey what is the solution
plz check once the dhcp ip it is assigned with or wan ip whether it's valid range from your primary router or not@@tanjirooo604
hey I have "echolife hg8245w5" huawei router, i want to use it as repeater, please help me
thank you
you can't use it as repeater because of features unavailability on it, instead you can use it to extend your range or use it as secondary router or you can use it as repeater in the way that perform the same configurations as shown on video on your hg8245w5 router and keep the ssid name/key same as of primary router. This will then work as same wifi setup for your devices and you do not need to connect to both router separately though they are configured separately.
Does it have to be connected via ethernet? I want to be wireless
yes, in this scenario we need to connect via Ethernet.
thank you
Bhai ya Sara galat ha mRa modem ka ip address off hogya ha ab koi batay ga ka ya kasay on hoga
I’m trying to bridge a huawei router to an arris router. How would I do that ? I don’t see a bridging option in the configurations
in Huawei ftth onu, you might not find bridging connection type but you can make it as bridge router by doing the same as shown. Connect your Huawei onu one of LAN port with your primary router or your Arris router's LAN port. Make sure lan port is enabled and internet is working from your primary router's lan port, and then Login to Huawei onu router and enable lan and disable dhcp, it will work as bridge router. Refer to the tutorial for configuration step on Huawei onu. thanks for your query.
Can it be wireless?
thanks for your query.
we cannot connect these huawei router/onu wirelessly as there isn't any feature option available like wireless extender mode setup or repeater mode setup in these models. Incase of any further query related do let us know.
Thank You !
can we setup the device as wireless extender
no we cannot connect this device wirelessly instead you can use it as access point/secondary router/range extender with wired connection
How to convert airtel gpon zte f670lv9 to epon or how to use it with onu device
This is for Huawei ONU...please test if it works. We donot have meanwhile ZTE ONU on stock so that could show the process. Once it is available we will try on it too.
---------------------------------------
by using Telnet try it
From GPON to EPON:
login (root admin)
su
set upport mode 2
set optmode mode 197
quit
reset
==================================
I tried HG8347R and HG8346R, converting is done by telnet as follows:
From EPON to GPON:
login (root admin)
su
set upport mode 1
set optmode mode 196
quit
reset
From GPON to EPON:
login (root admin)
su
set upport mode 2
set optmode mode 197
quit
reset
========================
Thanks for your query.
Bro how can i connect my ntfiberr router as an secondary router??
if it's unused, make sure to reset it to take it to factory default settings and then login your onu setup wan as bridge mode and disable dhcp server, enable lan ports and save the settings. then connect lan cable from primary routers lan port to your cpe tewa's lan port and check your internet connectivity once after rebooting the cpe device after configuration save and setup.
hope it works.
Thanks
Its used? What should i do??
@@gauravadhikari6672 used means are you using it as primary router and want's to setup it as secondary router? or if it's used and you have switched to another isp and wants nt onu to use it as secondary then make sure to reset it to take it to factory default settings and then login your onu setup wan as bridge mode and disable dhcp server, enable lan ports and save the settings. then connect lan cable from primary routers lan port to your cpe tewa's lan port and check your internet connectivity once after rebooting the cpe device after configuration save and setup.
hope it works.
Thanks
Thanks bro its works
@@gauravadhikari6672 glad it worked. thanks for the feedback...keep exploring
Bro ssid HUAWEI-56al dekhayo but password eeeeeeee leh connect vayana can't connect to this network vanyo
try once after resetting and check..if can't connect from that password then please do check the ssid key mentioned backside of your router. hope you will get connected and then try logging in and follow the instructions.
thanks for your query.
net ta chalyo tara login page nai khulena Jun ip address hanada ni.... ani red light pani blinking vairaxa continuously....k vako hola vandinu paryo🥺
Red light blink case: you haven't connected patchcord connector of fiber in this fiber/gpon/epon onu/router, so it's blinking. it's the signal or identification of loss or breakage of fiber. in this case we aren't using fiber cable instead we have used this router as Secondary router with Lan/Ethernet cable connection to lan port. So, let it blink if you just want it for secondary setup.
Next,
to login this onu after setup as shown. it's in bridge mode and dhcp is disabled. so, to login router for ssid/wifi credentials modification or etc. make sure you know which ip is this router assigned with from your primary router's connected device and try logging in from that ip. Also, you can login from another way is connecting lan cable to your laptop/pc and assign static ip of same range of router's gateway. you will easily login from that assigned gateway ip too.
Thank You.
Plz give me details for model 707gr1 gpon router repeater details
thanks for your query. the process is same almost for other gpon onu too. connect internet cable to lan port and disable dhcp and configure wlan setting and then test and browse the connectivity. sorry for mentioned model details, as we haven't on stock with us to show,
Thank you.
i can't see enabling lan port workmode. Thus it is not working. can you suggest anymore???
trying enabling lan from wan connection first and then from lan port. If still it's not working then try resetting your router and login from telecomadmin/admintelecom user/password and then follow the instructions.
@@TechnicalHakim thanks so much. I had the same problem
did you get it resolved, if not could you please elaborate it or drop comment incase related queries.
Hello, thanks for the video. I have tried this but when connected to the main modem it kills my IPv6 connection. I have to unplug it and restart my main modem to IPv6 start working again :/
thanks for your feedback... plz make sure you verify your wan and network settings.
Can it work without a gpon
yes it does via lan connectivity
I am unable to login router it open primary router
to login into your secondary router make sure you know the ip address assigned with from primary routers connected devices list or dhcp lists/client lists. once you know you can login into it. another way is that you can manually login to it with the help of mobile or your laptop by assigning manual ip to the interfaces.. hope it helps
Without cable how to uesd ?
@@lovegaming6763 after doing the configuration as shown in the instructions, connect the lan/ethernet cable from yours primary router lan port to this router lan port and start browsing internet.
thanks for your query
@TechnicalHakim new video Bando na sir ji
@@lovegaming6763 thanks for your query...we will keep posting new contents in upcoming days..
howcan i bridge tplink router(secondary) with my active connection of huawei fiber device ?
thanks for your query. you need to setup your tplink wireless connection type as bridge mode and select the network you want to bridge.
To bridge your TP-Link router wirelessly, here's what you need to do.
Open your router's default gateway and enter your username and admin password.
Head to “Wireless”.
Select “Wireless Settings” and also enable “WDS”.
Hit “Apply” and let your router reboot.
for your ease go through this you will find the procedures. www.tp-link.com/us/support/emulator/
I have this device too. But why the interface is different. All is blue.
appearance might be different but processes is the same. hope you are done through it
Mine says wireless net as ssid. But I don't know the password. The password doesn't match with the one as the one which is on the back of the router. Please help
please try this as password once: eeeeeeee
@@TechnicalHakim Hi use lan wire to login at your default ip under your router or use the reset button (press the reset button until all leds stop and start)
@@theEarnwave 👍️
There is not showing lan 1 lan 3 lan 3 option what to do ?
trying enabling lan from wan connection first and then from lan port, or enable lan from LAN and then goto WAN- connection and enable also from there and apply settings. please do let us know incase of any query.
@@TechnicalHakim if you don't mind make one video about this 🤗 please!
@@robinsmehta follow the instructions shown, you will find it make sure your router/onu is in default configuration mode. if not try resetting if there isn't any configuration then and try. incase of query related let us know. you can also connect with us on facebook.com/technicalhakim
thank you.
@@robinsmehta hope your query has been solved.
Keep exploring and sharing.
same problem happen to me
if we disable the DHCP mode, IP will not conflict ... correct... 👍👍👍👍👍
yes somehow
Dai wirelessly connect garni tarika sikaunu na
bro yei onu/router lai chai wirelessly connect garna mildai na features available na vako le.
@@TechnicalHakim bandwidth priority ni ??
@@krishnakc2165 not available in this one but surely you can find on others dsl routers, routers, etc.
Router configuration page doesn't open
Bec of no Internet
no internet accessibility should not be the reason for your router control locally.... you can still access your router with login credential's and modify the configuration and once you are done with the configuration internet should work....make sure you have provided source/method of internet connection to your router either via wired or wireless in some cases different than this onu.
thanks for your query.
bro that ip address doesn't opens
what can be the possible solution
see the ip address mentioned behind/backside of onu and try logging from that ip or you can assign the static ip of same range of onu in your pc/laptop and can access it from respective ip gateway...try once and let us know incase of any query related
if u can't login use the reset button
@@theEarnwave 👍️
login page does not appear on that ip address or other ip's (tried with ip on back of router also). it also shows wirelessnet as ssid and pwd:eeeeeeee. What can be done?
thanks for your query.
Try resetting once. if wirelessnet ssid or Huawei onu default ssid is displayed connect to it and what ip/gateway router is assigned with and try logging in from that ip.
anotherway, Also you can manually set ip to your ONU router ethernet connecting to pc, for that connect lan cable from onu's lan port to your Pc or laptop ethernet port and assign static ip to ethernet adapter of your pc/laptop of same network range. for eg: go to ethernet properties of your pc and right click on properties and click on ipv4/tcip and click on use the following ip:
ip: eg: 192.168.100.10 or try [ 192.168.0.10]
subnet mask: 255.255.255.0 [same]
Default gateway: 192.168.100.1 or [192.168.0.1]
-------------------
now, open any browser and try login from Default gateway assigned ip.
i hope it might help you. incase do let us know if i can help any further.
Thank you.
@@TechnicalHakim having a same prblm ..even i tried with ur things but didnt work..its same router and model number. But didnt went well it says took too long to respond and nothing
@@TechnicalHakim same issue with me admin page is not working fpr huawai router
@@TechnicalHakim is open main router
@@Anmolsahu555 try once after default resetting the device.
sir please help me i have huawei hg 8546m onu but after resetting from pin button it shows "SSID - Wirelessnet" and default password on back sticker is not working please help me what should i do??
if wirelessnet ssid showing then insert password "eeeeeeee" . You'll be able to connect and move ahead as you like.
8 words e
its working but i no longer have access to the HW settings it says '' Incorrect User Name/Password combination. Please try again. ''
try once logging from this.
user: telecomadmin
pwd: admintelecom
@@TechnicalHakim still incorrect...
@@Warcell The default username is telecomadmin and the default password is admintelecom. if it's not working then plz try once resetting factory default and try setting it up again, it will work if user/password isn't modified.
I don't have those!!! I only have C port F, i have HG181H
is it wireless onu or non-wireless onu? if non-wireless you cannot perform wan setting directly on it, if not then you can proceed for the same if there is lan ports
Would to explain how to connect huawai router with tends wirelessly
thanks for your query.
we cannot setup/connect these huawei router/onu wirelessly as there isn't any option available like wireless extender mode setup or repeater mode setup. Incase of any further query related do let us know.
Thank You !!!
Without wire wireless process please 😢
we can setup it via ethernet by assigning ip address of router's gateway ip and login to router homepage and follow the instructions shown. hope you will get it. plz do let us know incase of any query.
@@TechnicalHakim i have not seen any wireless connectivity for secondary router in this router
thanks for your query. wireless repeater or bridge mode isn't available in this onu so we can't set up it as you are querying. instead we can use it as secondary router or wireless extender configuring as shown by connecting Ethernet cable from primary router to this Huawei onu lan port. hope you got it.
thanks
Sir mero vayena😢
make sure you have done with this things on your Huawei ONT: enabled lan settings, disabled dhcp server and connected ethernet cable from your primary router to this huawei ont router which you want to make it work as secondary.... follow the steps and instructions, i hope you would get it...if still not do let us know incase of any queries related.
thank you.
Please speak loudly. Not audible. Seems you are doing evething for yourself.
thank you for your feedback.
Than how to log in user id and password please say
Once you are done with setup, the next time you want to login to your onu you need to connect through your pc/laptop and assign static ip on Ethernet and can easily login...or can also login if you know what ip it has been assigned with from primary onu/router.
default username: telecomadmin
password: admintelecom
Thank You !
@@TechnicalHakim primary router is worldlink router
@@madhavgautam1500 is it Nokia onu?
if yes then reset it...try default login and setup as u need.
you can find default login credentials from backside of your router/onu too.
Riyan khan
yes please
I can’t acess to my ip address.
try once factory default. also verify whether the ip of your router is reachable or not from your device. lets us know incase of any query related
@@TechnicalHakim ip address isnot given at my router. I found ip address through ipaddress pathway.
okay, make sure it's (router)gateway ip or not then only you can access it..connect to your pc/mobile and from ip details you can get gateway ip from which you can access it..make sure andy customized firmware isn't loaded to your onu@@yourfavoritelyrics10
Turn yr volume up bro, u sound like a mouse
thanks for your feedback. will try to optimize the same in upcoming contents.
Very low voice over..
thanks for your feedback, will try to resolve in upcoming contents.
I want to connect wirelessly
you couldn't connect wirelessly in this scenario in this ONU/ONT due to the unavailability of features and so on in this onu/ont.
hope you got it.
thanks for your query.
Works like a charm but once this is done the secondary router shows only the 2.4hz bandwith with a new SSID , the 5hz bandwith shows as the old SSID and password which is given behind the router itself
thanks for your feedback.....also to modify your wireless credentials make sure you modify it at the time of setup or can access it via your pc or laptop by assigning static ip to ethernet.
thank you.
What is the password after resetting router ???
try once logging from this to access your onu/router webpage:
user: telecomadmin
pwd: admintelecom
-----------------------------------
once after reset, check the backside of your router for default ssid name and key/password or password can also be in some onu: eeeeeeee
hope it helps.
Bhai nahi How gayi
follow the instructions as shown, it will work definitely.
Make sure you have connected Lan/Ethernet cable from primary router to your Huawei( secondary) onu/router properly and verify the lan connectivity once after performing configuration. It will work, incase of any further assistance related, do drop down your queries.
Thank You !!!
My router is ' GPON CPE Tewa-500g'
How can i use it as secondary router plss helpp
if it's unused, make sure to reset it to take it to factory default settings and then login your onu setup wan as bridge mode and disable dhcp server, enable lan ports and save the settings. then connect lan cable from primary routers lan port to your cpe tewa's lan port and check your internet connectivity once after rebooting the cpe device after configuration save and setup.
hope it works.
Thanks
this idea is not working
thanks for your query, it will work obviously, please follow the instructions carefully, if having trouble try after resetting the onu router, and login the onu and follow the further, please let us incase of any query related.
but after dong this I'm not able access Huawei router configuration page.
thanks for your query... as you are known that you have disabled the dhcp server on Huawei router..It works as a bridge Repeater or secondary router wireless extender.
1. You can access it via your PC/laptop by assigning the same range IP/ gateway of router given backside of router.
2. You can also login with ip it has been assigned with. To know the ip it has been assigned with, you need to login your primary router. From primary routers connected device list/client list/dhcp client list you can know the ip the Huawei router has been assigned, and then you access the router from that ip which it has been assigned.
i hope you got this. .........
@@TechnicalHakim thanks man