I got a quote for over $700 to replace the started and that motivated me to keep troubleshooting myself first. Thanks for the great video, I think this is my issue.
Thanks for the video! I was able to replace my ignition switch in about 20 minutes after I disconnected the negative cable on the battery. I'm usually good at taking things apart, but not so good at putting them back together...but thanks to your video I got everything back together no problem, and my CRV starts every time now. Much appreciated!!
$35 part and abt an hour of time. Had the exact noise. Awesome video. 5 screws that's it. Hardest part was the last 2 screws but a small Philips did the job. Perseverance wins the day. Just gave u a subscribe and thumbs up bro. U deserve it. Saved me $$$.
I used your video to help me with this problem I had with my Element. I followed exactly what you did and it worked like a charm. I just want to thank you so much for your help! You saved me $150 or so.
Thanks to your excellent tutorial, I had my starter switch changed out in about 30 minutes last evening. The hardest part was contorting myself between the seat and steering column and positioning the screwdrivers at EXACTLY right the angles to remove the clamshell screws. Now my CRV starts every time with no buzzes, and I today I stopped holding my breath every time I turn the key that it would fire off. I did vary just a bit and use a genuine Honda switch.
You saved me some serious headache and moolah! I was able to do the install, at night, following along with your instructions. I hit one snag. When I installed the new switch i must have inadvertently turned the ignition cylinder as I wriggled and pushed the part into place. This completely froze the ignition cylinder to the point that the key would not turn (not even a bit) when everything was put back together. As a result I removed the part from the cylinder again and adjusted the small slot in the middle of the switch that the small metal part of the cylinder fits into. Kinda hard to explain. But anyway, when doing this repair the switch should slide into place without much pressure. If it doesn't, try rotating the switch a little bit clockwise until it does. 👍🏿
I just two days ago watched the videos on this and pulled my daughter's apart. Some worn burnt contacts. I gave them a good cleaning and new lube and reinstalled it. It works great now. I may change it later, but it was a pretty quick fix.
Thanks! My son's 2011 CR-V has been acting up for a few months now. I thought it was the starter, (which is a real bear to replace) but his is doing the exact same thing as yours. I ordered a new part for $50. Will install tomorrow.
Thank you!! Your video fixed my problem. I had the exact same problem with the ignition switch buzzing so I ordered the part you recommended from Amazon. Hardest part was removing those small screws holding the component. I almost gave up. I thought that I had stripped them.
Thank you so much mate. Your video is extreamly helpfull. It saved me a lot of money and avoided all the bullsh... from mechanics like .... oh you need to replace starter motor, maybe replace the battery,.. etc...
Thank you so much for your video. I was really afraid and worried about how difficult and costly replacing the switch would be. I'm m going to give it a try!
Great video. Thanks. Before installing new switch look inside new switch to ensure new switch female side is in same position as old switch. If it is not take your key and turn it a bit. It will help with install so male end in steering column aligns properly with new switch.
Thank you very much for this video! I had the same problem and I thought I would need to replace the starter. I bought the exact same piece you used and I was able to replace it myself (with 0 experience at all lol). Saved me some stress and a couple hundred bucks. Thank you!!
Thanks for the video. On my father's 2016 there was one screw on the bottom and 2 up behind the steering wheel to get the column shell off. Had to turn wheel and do one at a time
Thank you for this awesome video. I ordered the same part from Amazon that u advised. Works perfectly, I couldn't have done it without you. Thanks to you, it cost me $50 instead of 1200 at dlrship. God Bless
Thanks for the great video Dlrship wants over 1000 to replace I am so greatful for your video U inspired me to do it myself I will keep u posted God Bless
Nice video. But I couldn't get the small screws out. I tried a number 2 and then a number 1 Phillips. Neither could get a grip. The point is bottoming out on the middle and the flutes are not engaging. I will have to grind off the tip of the screwdriver or bring it somewhere.
Thank you so much for the video! I wanted to ask if it’s necessary to unplug the negative battery cable first before doing this if not then imma go right ahead and install mine too.
Your welcome Its recommended when workin on electronics but i didn't do it . Make sure everything is lined up and ur key can turn before putting it all back together
The two small screws that hold the switch to the lock cylinder are phillips and the angle they are at is difficult to access and torque out. A small wratchet wrench with a phillips bit is your best bet .
Hey is there any type of programming when putting the new ignition switch from Amazon because a few mechanics are saying the key will not work with another ignition switch unless they program it to the new switch
Thank you. Lock Smith wants to charge $1000 Machanic wants to charge $1700 My key does not turn in ignition , Steering wheel is also locked. Do I need new cylinder and is my key not in sync with computer?
I have a video of what mine sounds like. Also, I think it’s the same thing as yours, but I can’t figure out how to upload it on here so you can hear it. We already change that starter, as well as the relay switch to the ignition and it’s still doing it!
Hi could the issue possibly be the same if i turn the key and hear nothing? No noise no buzzing and no crank. Everything has power and ive teeted another relay for the starter and nothing worked. I am able to jump start the vehicle through the cable coming off the starter nesr the battery. 2007 crv. Thanks for any help!
@@ADollarAndAWrench thanks for the quick response. Amazon has been pretty slow lately so Im probably just going to AutoZone tomorrow morning. I tested everything else I know of so hopefully this fixes it. I'll update. Thanks for the help
did this with my 2005 odyssey and key wouldn’t turn. i tried the old ignition switch and still wouldn’t work. put the new one back in and accidentally locked the steering wheel. anyone know what to do
@@ADollarAndAWrench yeah i’ve been trying that for days and it won’t work which i think kinda makes sense seeing the key wouldn’t turn before the wheel got locked
I got a quote for over $700 to replace the started and that motivated me to keep troubleshooting myself first. Thanks for the great video, I think this is my issue.
Hopefully this fixes the issue
Thanks for watching
@@ADollarAndAWrench Thanks again, it's been nearly a week with no problems starting the CR-V.
NICE glad to hear it worked out and u saved some money
Thanks this helps me out
Auto repair video with no music in background. Fantastic. I hope you gather 1 million subscribers. Well done. Ty
😄 ur comment made my day thank you
I did mine today but now my key won’t turn. Any ideas or have you heard of that. Thank you
Take it back off and make sure its lined up properly before screwing it back up
Thanks for the video! I was able to replace my ignition switch in about 20 minutes after I disconnected the negative cable on the battery. I'm usually good at taking things apart, but not so good at putting them back together...but thanks to your video I got everything back together no problem, and my CRV starts every time now.
Much appreciated!!
Like many others here, this vid was extremely helpful in even diagnosing the buzzing sound. My mechanic had no clue. All fixed up now. THANK YOU 🙌🏼
Nice! Im glad the video helped you out .thank you for watching
$35 part and abt an hour of time. Had the exact noise. Awesome video. 5 screws that's it. Hardest part was the last 2 screws but a small Philips did the job. Perseverance wins the day. Just gave u a subscribe and thumbs up bro. U deserve it. Saved me $$$.
Thank you. Glad the video saved u some $$$ thats what its all about
I used your video to help me with this problem I had with my Element. I followed exactly what you did and it worked like a charm. I just want to thank you so much for your help! You saved me $150 or so.
Your welcome im glad the video helped and thank you for watching Tom
Thanks to your excellent tutorial, I had my starter switch changed out in about 30 minutes last evening. The hardest part was contorting myself between the seat and steering column and positioning the screwdrivers at EXACTLY right the angles to remove the clamshell screws. Now my CRV starts every time with no buzzes, and I today I stopped holding my breath every time I turn the key that it would fire off. I did vary just a bit and use a genuine Honda switch.
You cant go wrong with oem parts thats was a good move im glad the video helped and thank you for watching
You saved me some serious headache and moolah! I was able to do the install, at night, following along with your instructions. I hit one snag. When I installed the new switch i must have inadvertently turned the ignition cylinder as I wriggled and pushed the part into place. This completely froze the ignition cylinder to the point that the key would not turn (not even a bit) when everything was put back together.
As a result I removed the part from the cylinder again and adjusted the small slot in the middle of the switch that the small metal part of the cylinder fits into. Kinda hard to explain. But anyway, when doing this repair the switch should slide into place without much pressure. If it doesn't, try rotating the switch a little bit clockwise until it does. 👍🏿
I just two days ago watched the videos on this and pulled my daughter's apart. Some worn burnt contacts. I gave them a good cleaning and new lube and reinstalled it. It works great now. I may change it later, but it was a pretty quick fix.
Nice video. Clear and to the point. I would also recommend disconnecting the negative battery cable when you're working on electronics like this.
Yes that's correct and recode key
@ruthnash8486 You dont need to recode the key after doing this
Thanks! My son's 2011 CR-V has been acting up for a few months now. I thought it was the starter, (which is a real bear to replace) but his is doing the exact same thing as yours. I ordered a new part for $50. Will install tomorrow.
Make sure test that its lined up properly be4 puttingbit back together. Couple guys in the comments were having problems it was quick and easy for me
Thank you!! Your video fixed my problem. I had the exact same problem with the ignition switch buzzing so I ordered the part you recommended from Amazon. Hardest part was removing those small screws holding the component. I almost gave up. I thought that I had stripped them.
Good job sticking to it and getting it done saved ur self a bunch of money too . Glad the video helped and thank u for watching
Thank you so much! I couldn’t have done this repair myself without you!
Your welcome glad the video helped
Thank you so much mate. Your video is extreamly helpfull. It saved me a lot of money and avoided all the bullsh... from mechanics like .... oh you need to replace starter motor, maybe replace the battery,.. etc...
Your welcome glad the video helped u out thanks for commenting also
Thank you so much for your video. I was really afraid and worried about how difficult and costly replacing the switch would be. I'm m going to give it a try!
Ur welcome make to try ur key to check if everything is luned up properly before putting everything back together cheers
Great video. Thanks. Before installing new switch look inside new switch to ensure new switch female side is in same position as old switch. If it is not take your key and turn it a bit. It will help with install so male end in steering column aligns properly with new switch.
Thank you, your tip helped a lot to solve my problem, it was the same part
hug from Brazil 🇧🇷
Wow Brazil!!! Im gladvthe video helped you thank you for watching
Thank you very much for this video! I had the same problem and I thought I would need to replace the starter. I bought the exact same piece you used and I was able to replace it myself (with 0 experience at all lol). Saved me some stress and a couple hundred bucks. Thank you!!
Ur welcome thank you for watching im glad the video helped
Thanks for the video. On my father's 2016 there was one screw on the bottom and 2 up behind the steering wheel to get the column shell off. Had to turn wheel and do one at a time
Glad the video helped u out a bit thanks for watching
Its realy helpfull planning to change my starter but this is the real problem 👍👍👍👍🤙🤙🤙🤙
Thanks for the video. Was able to replace in my daughters CRV in under 20 min.
Ur welcome im glad the video helped and saved u some money
Thanks! A perfect video! We had the same problem. Always disconnect the battery when working on electrical components.
Thank you for this awesome video. I ordered the same part from Amazon that u advised. Works perfectly, I couldn't have done it without you.
Thanks to you, it cost me $50 instead of 1200 at dlrship.
God Bless
Thank you im Glad the video helped
Ty for your help by pointing out things on how to do this and keep up with the honda element repairs, its helpful to us Element lovers.
Your Welcome. Glad it helped Thank you for watching .happy to help
Absolutely brilliant….and a low-key presentation 💯
Thank you
Hopefully this helps you out
Thanks so much, had same problem with my 2011 CRV- fixed quick thanks to you
Hey your Welcome im glad the video helped
Thanks for the great video
Dlrship wants over 1000 to replace
I am so greatful for your video
U inspired me to do it myself
I will keep u posted
God Bless
Wow thank u and ur welcome hopefully u get it sorted out its a pretty easy . Glad the video helped out
Nice video. But I couldn't get the small screws out. I tried a number 2 and then a number 1 Phillips. Neither could get a grip. The point is bottoming out on the middle and the flutes are not engaging. I will have to grind off the tip of the screwdriver or bring it somewhere.
Wow great vid. 👌 mechanic wanted to charge me 1000 dollars to do the whole thing new including cylinder key.😮 😅 this was the initial problem
Hopefully this fixes your problem saves you some $$$
Great simple video!
Thank you! Straight forward video. You saved me a bundle.
Thank you so much for the video! I wanted to ask if it’s necessary to unplug the negative battery cable first before doing this if not then imma go right ahead and install mine too.
Your welcome
Its recommended when workin on electronics but i didn't do it .
Make sure everything is lined up and ur key can turn before putting it all back together
@ bless my brudda cuz I was thinking it wouldn’t work without unplugging the battery thing but respect for the heads up and imma get on it!
The two small screws that hold the switch to the lock cylinder are phillips and the angle they are at is difficult to access and torque out. A small wratchet wrench with a phillips bit is your best bet .
Hey is there any type of programming when putting the new ignition switch from Amazon because a few mechanics are saying the key will not work with another ignition switch unless they program it to the new switch
If u are doin exactly what i did in the video you dont need to program anything
Thank you brother. My CRV has the same issue, I am going to tackle this. Big help, thank you!
Your welcome glad the video helped and thank you for watching hopefully it goes smooth for you
Hey I wonder does this work for a 2004 honda accord, I mean is it located in the same spot?
Yes it should be .its pretty much the same process to get to it
@@ADollarAndAWrench ok 👌
Thank you. Lock Smith wants to charge $1000
Machanic wants to charge $1700
My key does not turn in ignition ,
Steering wheel is also locked. Do I need new cylinder and is my key not in sync with computer?
I have a video of what mine sounds like. Also, I think it’s the same thing as yours, but I can’t figure out how to upload it on here so you can hear it. We already change that starter, as well as the relay switch to the ignition and it’s still doing it!
Exactly what I was looking for! Thank you!
Ur welcome im glad it helped and thanks for watching
Hi could the issue possibly be the same if i turn the key and hear nothing? No noise no buzzing and no crank. Everything has power and ive teeted another relay for the starter and nothing worked. I am able to jump start the vehicle through the cable coming off the starter nesr the battery. 2007 crv. Thanks for any help!
The part is $40 on Amazon. Worth a try and if it doesn't fix it u could the part back free of charge. Its worth a shot. Hope this helps
@@ADollarAndAWrench thanks for the quick response. Amazon has been pretty slow lately so Im probably just going to AutoZone tomorrow morning. I tested everything else I know of so hopefully this fixes it. I'll update. Thanks for the help
Ok cool let me know Hopefully it works out
Yeah I tried it out and it didn't work. Not sure what else to do from here honestly. It just happened out of nowhere@@ADollarAndAWrench
Can u check if power is sent to the starter relay with a multimeter while someone is turning the key
Great job...
Thanks
I have the same problem with my 2008 RDX. Going to do this ASAP
Nice hope it helps
Thank you for this video, I used it to fix mine!
Your welcome thank u for watching
Gonna try this
thanks dude, I have the same issue and will try your solution
Glad the video helped and thanks for watching
Very helpful video. Thank you!
Glad it helped thank u for watching
Thanks for sharing good video
I have a 2002 crv doing the same thing , whats that part called?
Ignition starter switch
Ordered the part , thank you so much, the dealer ship in Michigan said it would be around 1400$ to fix, you just saved my life. God bless.
Thank you for clarifying how the piece changes. The way you explain in the video is excellent and you are from me like and subscribe
Thank you .im glad the video helped you out and thanks again for watching
Thanks. Have same problem. Will install today
So if you hear a buzz sound from the dash board when the key is turned the ignition switch is going out?
Most likely.
This is great, thanks!
Thank you very much for the great video, it was very helpful!!
Your welcome thanks for watching
Nice work as always 👏🏾 👌🏾
Thanks fam a quick one 2 last week
Good video. What CRV year is that?
Thank you its a 2007 honda CRV Awd
Thanks I know my problem now
My friend you sound like Like you from guyana
Lol im from Jamaica but everyone in Toronto sound like this r similar
Thank you my friend good
Valeo amigo, tive que apelar pra um gringo me ensinar. Valeo mesmo. Muito obrigado
Ur Welcome thank you for watching
Great video! Thx!
Your welcome
Best video.. bless up
Respect
does this ever happen and there is no buzz??
did this with my 2005 odyssey and key wouldn’t turn. i tried the old ignition switch and still wouldn’t work. put the new one back in and accidentally locked the steering wheel. anyone know what to do
Put the key in and turn the wheel in what ever direction it wants to go the most while tryin to turn the key the same time
@@ADollarAndAWrench yeah i’ve been trying that for days and it won’t work which i think kinda makes sense seeing the key wouldn’t turn before the wheel got locked
Thais to your excellent ⭐️⭐️⭐️⭐️⭐️👀
Glad the video helped thanks for watching
already replaced the ignition switch but still experience intermittent no start
Is it buzzing like the one in the video?
yes before the ignition switch was replaced was making a buzzing noise on the ignition key
So does the starter try to crank now?
What car is it ?
@@ADollarAndAWrench 2008 Honda CR-v
Great video. I just subscribe to your channel. Thank you.
THANKS ALOT glad the video helped and i appreciate the sub!!
I switch mine out but now the key witch won’t turn
Take it off amke sure its lined up properly try the key again b4 bolting back together
Just tried this and it didn’t work for mine. I was for sure that this was the problem. I’m all out of ideas now. Anyone have any ideas
👍
You have recode key
Original key
REC9DE THE KEY HOW WOULD ONE DO THAT FOR A 2005 HONDA ACCORD LX 4 CYLINDER COUPE
Google mobile a key programmer in your area
Or the dealership can
Or you would need the key programming device obd2
❤
👍