Bro fell down from heaven and gave us step by step instructions on how to save $15k. Thank you. I have a 3 group very similar just a bit older. Nova Evd2 model. I have nothing coming out of any of the 3 groups. Is there still a service kit available for these (gaskets/seals/rings..)? I'm in Canada.
Thank you so much! I have one group head that is slower than the other. Could that be from the jet being partialy blocked? This video is so helpful. I have a 3 group wega polaris that i am trying to fix.
Thank you we love you so much please can you tell the main problem of espresso or coffee machine and how can I fix it in the next video I will subscribe you are amazing
i have the same machine, when i select option switch from 1 to 2 it trips the breaker. i thought it was the pressure switch and replaced it because it had burnt marks on it. but its still happening. anything to help will be appreciated. Thanks for the video i already learned alot.
Hi great video! I have Wega coffee machine with 2 groups model EVD but I think I have a problem with the pressure as the left side pours out more water and the right side pours out less water and more steam. The pressure thermometer stays at 3-4 when it is not in use and goes up to to maximum 6 when in use it does not touch the green zone at all. Do you know where the problem could be and how to fix it please?
The problem I’m having with my Cecilware machine right now it keeps releasing water from the safety valve , is that because the safety valve is going or is there another issue cause the water to release from the tank ?
thanks for reply how much is your coffee and do you have amount i could buy to try out i live in townsville queensland just setting up shop and have a wega polaris 2 group i sorted power but have problem wont pragam left side grouyp any ideas what to fix cheers lee
@leighyarnall7346 check the switch on the right have side is on while programming and off while using. U will find the switch under the right steam knob
if the pressure stat goes bad, and only two of the connection points are used already. Can the other points be used or does the whole thing have to be replaced?
Can use the other one no problem, pull the burnt one out w pliers so it doesn't affect the good terminal by not closing completely. Don't forget to subscribe
need expert advice on how to clean a hx boiler. There is a layer of SUPER hard black resedue I can't get rid off. I have Used decalz, and cafiza. No effect really. And now I am going to a surface specialist in blasting with glas.
@@coastcafeequipment I never used citric. I just used the normal coffee decalz. Maybe my solution was not strong enough. Anyway I am hoping the blasting will remove it, and make the copper surface stronger
This is probably one of the most useful videos on espresso machines that exists on TH-cam
Thanks alot 🙏
Thanks for this video.
This video is lot of useful for me....
Great job bro...👍👍👍
Super useful. Thank you
Great content! + sub
Bro fell down from heaven and gave us step by step instructions on how to save $15k. Thank you. I have a 3 group very similar just a bit older. Nova Evd2 model. I have nothing coming out of any of the 3 groups. Is there still a service kit available for these (gaskets/seals/rings..)? I'm in Canada.
You should be able to find seals and parts for any wega.
Thank you so much! I have one group head that is slower than the other. Could that be from the jet being partialy blocked? This video is so helpful. I have a 3 group wega polaris that i am trying to fix.
@mindywilson531 yea most likely a Jet, could also be flowmeter . Start w the jet
@coastcafeequipment ok so jet was fine and the flowmeter was fine. How does the machine act when the solonoid valve is bad?
Thank you we love you so much please can you tell the main problem of espresso or coffee machine and how can I fix it in the next video I will subscribe you are amazing
@msthetrailer8534 sure , make sure to watch all the videos
i have the same machine, when i select option switch from 1 to 2 it trips the breaker. i thought it was the pressure switch and replaced it because it had burnt marks on it. but its still happening. anything to help will be appreciated. Thanks for the video i already learned alot.
Burn marks are normal on the pressure stat , your element is most likely blown. Check my other element video
@@coastcafeequipment Thank you will do.
Hi great video! I have Wega coffee machine with 2 groups model EVD but I think I have a problem with the pressure as the left side pours out more water and the right side pours out less water and more steam. The pressure thermometer stays at 3-4 when it is not in use and goes up to to maximum 6 when in use it does not touch the green zone at all. Do you know where the problem could be and how to fix it please?
Clean the jets and filters to start, then clean the flow meters if the issue continues
The problem I’m having with my Cecilware machine right now it keeps releasing water from the safety valve , is that because the safety valve is going or is there another issue cause the water to release from the tank ?
@@Ishmaellllllllllllll check the pressure gauge that will answer your question
@@coastcafeequipment it was the pressure stat and the probe was bad , I cleaned it out with some sandpaper and it started back working as it should .
hi great video i have a 3 phase group 2 wega polaris have you got info to re wire to single phase please
cheers leigh
I'm sorry I don't. However I don't think there is any 3 phase machine. Perhaps 32amp. You can change the element or limit the elements you use.
thanks for reply how much is your coffee and do you have amount i could buy to try out i live in townsville queensland just setting up shop and have a wega polaris 2 group i sorted power but have problem wont pragam left side grouyp any ideas what to fix
cheers lee
@leighyarnall7346 check the switch on the right have side is on while programming and off while using. U will find the switch under the right steam knob
Other issue could be the flow meters
, look at the video how to locate and clean.
You can order online @
spinaespresso.com.au/
if the pressure stat goes bad, and only two of the connection points are used already. Can the other points be used or does the whole thing have to be replaced?
Can use the other one no problem, pull the burnt one out w pliers so it doesn't affect the good terminal by not closing completely. Don't forget to subscribe
@@coastcafeequipment Thank you. And I will
I'm looking for used espresso machine! Can you suggest anywhere to look for please?
We sell used machines, are you in Australia?
@@coastcafeequipment i though you are in italy or europe .. yes im looking for used machine but inside europe or in dubai
need expert advice on how to clean a hx boiler. There is a layer of SUPER hard black resedue I can't get rid off. I have Used decalz, and cafiza. No effect really. And now I am going to a surface specialist in blasting with glas.
Acid
Usually people use acid
what kind of acid?
@plurplursen7172 critric from what I have heard, but I haven't done it, see no reason to. So do some research
@@coastcafeequipment I never used citric. I just used the normal coffee decalz. Maybe my solution was not strong enough. Anyway I am hoping the blasting will remove it, and make the copper surface stronger
I have single group, same model. Works good manually but automatic shots are not working, any ideas. Would it be the main board or the button board.
Could be, more info needed
What info do you need
@patricklucki5368 could me main board, buttons, ribbon cable, flow meter. Need a tech to look at it on site, it sounds like
My wega 3 group coffee machine is not turning on.there is no power. Can you pls assist where I can find the fuse location. I will try and change it
There is a fuse on the main board, unlikely to be the issue. Most common is main switch issue
Thank you
How can i set the wega Program setting for being auotamatic
Under the right steam handle is a silver switch , needs to be down
❤