วีดีโอ

How can I stop water filing not stopping

My 3 head wega nova has power running from main switch into the board, and then when you plug the ground in, it loses power. I say it has power, but it doesn’t seem to be full power. It just reads hot on a basic electrical meter. Any suggestions?

Hi! I have an issue with my bezzera bz10. When it heats, before I make the first coffee, the boiler pressure is getting too high (above the red mark). After I make the first coffee it gets back to normal. What could be the problem? Thank you!

Sir do you have Facebook page? I will send a video for commercial coffee machine don't function but have power

11:18 adjust temperatur of the boiler

What's with the stupid music😢

Hi, I have the same coffee machine after I cleaned the group head stopped working, “no water coming out, any clues? Thanks

Thank you so much! I have one group head that is slower than the other. Could that be from the jet being partialy blocked? This video is so helpful. I have a 3 group wega polaris that i am trying to fix.

Great content! + sub

Good Jobs my friend..👍👋

Super useful. Thank you

Great video. Thanks for going through cleaning of the wand as no one else had a demonstration of taking the nozzle off.

i have the same machine, when i select option switch from 1 to 2 it trips the breaker. i thought it was the pressure switch and replaced it because it had burnt marks on it. but its still happening. anything to help will be appreciated. Thanks for the video i already learned alot.

dont you have problems with simonelli boilers cracking

The problem I’m having with my Cecilware machine right now it keeps releasing water from the safety valve , is that because the safety valve is going or is there another issue cause the water to release from the tank ?

I have a ceilware machine and rn the pressure valve is blowing out water allll the time now after I replaced the pump after it was seize

Did you use thread tape on the pressure stat threads?

❤

I've got an original Oscar with three blinking lights after a few minutes from turning it on. Do you know what that means?

Thank you we love you so much please can you tell the main problem of espresso or coffee machine and how can I fix it in the next video I will subscribe you are amazing

Tradução em português

Thanks for this video. This video is lot of useful for me.... Great job bro...👍👍👍

Thanks for the video. I'm thinking of installing an Asco Sirai pressurestat im Oscar 2. So, basically you cut the original wires, put new cable lugs with a grimping tool and then plug the lugs in the Sirai pressurestat?

Hi great video! I have Wega coffee machine with 2 groups model EVD but I think I have a problem with the pressure as the left side pours out more water and the right side pours out less water and more steam. The pressure thermometer stays at 3-4 when it is not in use and goes up to to maximum 6 when in use it does not touch the green zone at all. Do you know where the problem could be and how to fix it please?

hi is realiable to check the element with the buzzer so if it beeps it means that the elements are ok?

if the pressure stat goes bad, and only two of the connection points are used already. Can the other points be used or does the whole thing have to be replaced?

I'm looking for used espresso machine! Can you suggest anywhere to look for please?

Thanks for the video. But now the machine does not heat up. Only the left light is turn on. It was working early. After two days I did try turning on and I can hear the pump working and I quickly turn off coz I thought there's no water. Anyway I add some water and turn on and it's not boiling and the left light is turn on only. Appreciate if you could assist me. Thank you again.

Starting up a coffeeshop and considering this machine. How has its longevity held up? Any things to keep an eye out for that may cause issues or difficulties in terms of workflow?

My wega 3 group coffee machine is not turning on.there is no power. Can you pls assist where I can find the fuse location. I will try and change it

❤

❤❤

❤

The boiler is not stainless steel. It’s nickel coated copper with brass end-plates.

Maybe you can help. I have a R Cinquantotto. When I turn on it makes a loud click and then silence ..I don't have computer box because it's second hand. I've replaced motherboard. The inlet solenoids, and all the wires. Checked the high limit switches and tested them. Any ideas ? Greatly appreciated

Bro fell down from heaven and gave us step by step instructions on how to save $15k. Thank you. I have a 3 group very similar just a bit older. Nova Evd2 model. I have nothing coming out of any of the 3 groups. Is there still a service kit available for these (gaskets/seals/rings..)? I'm in Canada.

A mi no me pasa agua del estanque al motor

This is probably one of the most useful videos on espresso machines that exists on TH-cam

promo sm

hi great video i have a 3 phase group 2 wega polaris have you got info to re wire to single phase please cheers leigh

Remember not all the time the pressure safety valve has to be replaced after it discharges, sometimes it is its normal operation especially when the pressure it's beyond 2 bars. Sometimes try just to adjust the pressure switch or replace it

I have single group, same model. Works good manually but automatic shots are not working, any ideas. Would it be the main board or the button board.

Do you have to empty the tank before changing the element?

How can i set the wega Program setting for being auotamatic

need expert advice on how to clean a hx boiler. There is a layer of SUPER hard black resedue I can't get rid off. I have Used decalz, and cafiza. No effect really. And now I am going to a surface specialist in blasting with glas.

Ehm, yes it's the valve. Because half of it are missing.

The pressurestat pipe might be partially clogged, the initial issue would be overheating, which made the element to work too hard, till the customer found out that is not heating.

2024 all machines now have SS tanks ha ha ha ha ha

What did you do @5:50 ? You were about to explain how to check that the water level sensor is working, but the phone rang and you forgot to mention what you looked for. Thank you very much for making this video.

I just opened my Oscar 2, pulled a couple of terrible shots, then kept the machine on for 30 minutes and it started purging all of its water through the bottom of the machine. No leaks in the tubes that I can see, but would the OPV rectify this issue? Thanks so much for your effort