APC SRT 3KVA UPS Firmware error solved
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- #apc #ups #upsrepairing
Apc Srt 3 Kva Ups firmware Repair | Apc Ups EEPROM Fault | How to repair software for Apc Ups
NOTE:
English subtitles are available for this video. The video language is urdu/hindi. If you don't understand this, then you can turn on the subtitles
Your searches
apc ups repair
how to repair ups
repair apc ups
online ups repair
ups repair
apc ups
aps srt 3000xli
apc firmware
apc G.01 error repair
apc fault G.01 firmware
ups software repair
APC UPS Programming EEPROM
APC UPS EEPRM programming
APC SRT UPS NEEDS FACTORY TUNING
Troubleshoot Your APC EEPROM
APC SRT needs factory tuning error
EEPROM Software Link 5KVA SRT and 6KVA SRT UPS
bit.ly/499WGZZ
EEPROM Software link for 3KVA SRT UPS
bit.ly/47WS88q
#apc #apcups #ups #upsrepairing #inverter
This man is an amazing master in his job. With his help, through online consultation, we repaired two 5KV UPS controller board. . Only after describing the problem, he immediately showed us the damaged part... Now both of UPS working like a new. Lots of thanks and recommendations from me.
Hi Sir, would you have the EEPROM file for a SRT1500 UPS?
No
@@AKElectroTech Thanks for the reply. I have been watching your videos trying to repair my SRT1500. It is displaying a P.13 Error and a 107 Inverter Hardware Circuit Error. I have replaced shorted IGBTs in the inverter stage and the output filtering capacitor. I have read that the EEPROM might need to be flashed to clear this error. Any tips would be appreciated :)
@@cutorange
pl wait
@@AKElectroTech Hi Again. Checking in if you know of any ideas of the cause of the fault in my unit.
With the assistance of AK Elctro T, I've fixed an SRT6K that had similar issue.
He knows a lot, probably he has forgotten more than I've ever learned.
Ask him for help if you need it.
Thanks
SRT 3000 UXI shows error G.11 after input voltage is applied. Red screen is on. UPS cannot be turned on. After activating the menu "Control - Clear alarms" the error disappears, the screen turns blue and the UPS can be turned on. After this, the UPS operates normally in all modes. But after completely turning off the UPS and the mains, the error repeats again. Please tell me how to fix this problem.
@@st18-ts6bt
Kindly send me log history.
Normally it is deal with EEPROM and you need to refresh EEPROM
@@AKElectroTech Many thanks! The history log in UPS contains only one repeating entry, which is added each time the power is supplied from the mains.
Power Subsystem Error. Event Code 187.
Are you suggesting to reflash the EEPROM chip, as in your video?
Where can I get a file with the necessary code for my UPS model SRT3000UXI-NCLI?
In this UPS I upgraded FW from Revision 00.8 to 15.6. (ID1024).
With the old version UPS worked unstably, there were many errors, the batteries did not charge, etc.
After the upgrade, the UPS began to work stably, but every time the input voltage is supplied, this error G.11 appears on the front screen.
I have uploaded 3kva file in description of video.
@@AKElectroTech Thank you very much! I will try to reflash the EEPROM.
@@AKElectroTech I have one more question. Can I use this file if I have a UPS with lithium batteries?
Sir apc ups rt 1500 online ups pay video banayea .
Ok
Can I ask for the firmware link?
Don't worry. Copy it from good board EEPROM.
firmware link in description of video
I will upload 3kva۔ uploaded
Uploaded for 3kva
@@AKElectroTech thank you very much!!!!!!!
@kletnik8bit568
Wellcome