Co2 Laser 600x400 part2
ฝัง
- เผยแพร่เมื่อ 10 เม.ย. 2021
- PART
CO2 laser with working area of 600mm by 400mm. built from start to end. This is Part 2. The outer frame.
Building the outer frame, electro box and tube extention.
Everything is made with allu profiles.
This CO2 laser has been fully adapted and all 3D printed pieces have been redrawn by me, this for the adjustment to linear rail system.
Because quite a few people have already asked if this is the model of Further Fabrication. I had already purchased the model and plans from Further Fabriction and built his model. see video link: • Video
downloads to Further Fabrication are available for the co2 laser 600x400
www.furtherfabrication.com/ne...
But my model is no longer the same as his model, although you can use his building book as a model and guidance . Then you have to adjust all sizes of the allu profiles and change 3D prints, because it is not with V-wheels, but with linear rails. The outer frame is also made of three parts. one for the laser itself, one frame for electro components and one for the extension of the laser tube if necessary.
So you have to decide for yourself what you want to do.
I recommend downloading his guide manual as a reference and then follow my video to adjust all sizes of the profiles, before you order the profiles if you don't cut them yourself.
the only parts such as my self-drawn 3D prints are not available at Further Fabrication.
link for the build guide: www.furtherfabrication.com/re...
link to my 3D print parts:
drive.google.com/file/d/1-aM0...
PS:
Further fabrication,
has now done an update to linear rails, posted: 23/4/2021
see his video.
also the 3d printed parts.
And better Y engine design.
see link: • Ep10: A little Upgrade...
if you want a better system, use this one from Further Fabrication. designed by Rob
I hope I made this clear.
I'm not sponsored by anyone and do everything on my own. a donation no matter how small is always welcome but not mandatory.
paypal.me/PRommens?locale.x=n... - บันเทิง
Congratulations, great work, you are amazing. Thank you, the next month I will begin to make this.
Gorgeous!! Thanks for the video :)
Thanks for the 3D files . I make some donation.
Thanks Mark for the support
great job
nice work
Já deixei meu LIKE!
Good, very good
Hello, congratulations on the video. What parameter did you use to use two motors on the y-axis?
good night, congratulations for the videos, how did you link two stepper on Y?
In the software, there you make steppermotor 2 as Slave in the Y axes if you use two drivers. Or you connect the kabels toghetter in one driver
Regarding the fume extraction, how did you determine the best place to have the fresh air come in to properly pull the fumes over the bed. I noticed you have sliding doors in the front, do you use those to regulate the airflow? Thank you.
indeed you can use the sliding doors to give access to fresh air. by opening a few centimeters on each side
@@PhilippeRommens thank you for the reply. Do you run your cutter indoors? If so, do you have any issues with air being pulled in from the outside, that is, bringing in a lot of cold air in the winter?
@@ErikHI63 its running inside, i have no problemen
Hey Philippe! What is the diameter of the pvc pipe used for the exhaust system? And which parts of the pipe connection were made in the 3D printer?
You can use what you want. I use 80mm and the big one 110mm. And you 3D print supports for the tube 80mm
Nice job, looks great, does it work?
See other video
Which power supply did you opt for instead of the 2 - 24v76? Also how did you mount your ground bar to the 2020 alu? Thanks!
I use a 360watt 24volt powersupply. The innerframe and the outerframe or secured on the table
@@PhilippeRommens Thank you! How does the green/brass bus bar @ 53:04 mount to the frame? Is it 3d printed part?
@@rouncewell7038 Hallo this has been purchased, see link: www.handyhomeottevaere.be/nl/assortiment/elektriciteit-58310/elektrisch-installatiemateriaal-58357/elektriciteitskasten-58366/verdeelkasten-58368/aardrail-groen-86989
you can buy other types from aliexpress or electro shop, zie link from alieexpress
nl.aliexpress.com/item/32808922065.html
@@PhilippeRommens I see, thank you :)
hello, honestly the job you have done is fantastic. I want to make a laser machine from scratch just like yours, but the cutting work should be 60x90, but I don't know how to design and unfortunately I don't know exactly what dimensions are needed from the aluminum profiles to cut. maybe you could help me please if I don't put you in a lot of trouble ? Thank you very much.
Actually very simple, you just have to extend all profile sizes on the longest side by 300mm and on the short side by 200mm. and this for all profiles. so you have a work surface of 600x900
@@PhilippeRommens Thank you very much for the prompt reply, I would like to ask one more thing... do the vslot aluminum profiles do the same job? also.. do I leave the height as it is in yours or change it too?
@@giorgospantelopoulos8433 yes vslot are ok, dont change the hight
HI Philippe, excellent work, I congratulate you, one question, do you have the estimate of the cost of the aluminum structure including motors and belts, without the components for the controller, mirrors and other laser components, I want to have an estimate to see if a similar project was carried out, thank you I congratulate you for your effort and dedication.
alu profiles: 121 € with shipment
stepper motors an driver: 143 € with shipment
belts: 6m x 9mm gt2: 16 €
pulley: 46 € 3 lose and 8 x 32 teeth
linear rail mgn 15: 3 pieces 90 €
total between 450 € and 500 €
depending on where you live and where you order. However, you have to search on different sites to find out what the best price is on the day of your orders. especially now with Black Friday, you can get good prices on aliexpres with a big discount
What is the new overall size of the internal and external frames, compared to the original design?
outer frame 936mm x 760mm x 450mm without electrobox and tube extention.
outer frame with electrobox = 1140mm
outer frame with laser tube extention = 1460mm, like my model on the video. ( lasertube 1250mm)
Innerframe total all components = 880mm x 710mm
i was expecting a detailed build on the electronics side, i remember Further Fabrications had some improvisations with the Co2, thought you will make that clear, long story short i watched you for 2 hours screwing screws.
Sorry one more question, what made you add an EMI power filter?
The EMC/EMI filters 1PNE 230V are used for the effective suppression of interferences which is radiated by every kind of electronic. To be sure
Where did you get the material to cover the outter Frame and what is that material?
kunststofplaten.be/alupanel-aluminium-composiet-platen/
what do you use for backwall electrobox? acrylic ?
I use a PVC (Polyvinyl chloride plate) plate 8mm, but you can use wath you want
congrats for the video.. May I ask you for the final measurements of length and width?
800x1250 depending on the power of the lasertube
Thanks very much !! Problably I used a 80w laser power
Hi there nice build. Where did you get the 30tooth idler pulleys from I can find anywhere. 30tooth drive pulleys are Availible but no idlers
The idler has no tooth it is flat
Why do you need the mA meter?
Boa noite meu querido irmao, gostei muito desse projetinho parabens, teria como disponibilizar a lista materiais por gentileza, isso se for possível, grato des de ja.
Olá. arquivo "co2-lasertube-holder-top" serve para tubo 50w?
You need to make a separate inner ring in two parts for a laser tube 50 watts, this can be printed in rubber or 3 d. Then you can put it in on the ring.
Hi, can you tell me what is the yellow material you used ? In french if possible please that help me to find it easier on the French shops like LeroyMerlin…
Alupanel is a plastic that can make fire no?
here you have the link where you can order it, they cut everything to size and deliver everywhere. Very fast delivery.link: kunststofplaten.be/product/geel-alupanel-3-mm/
ici vous avez un lien internet vers le site. Là, vous pouvez également choisir différentes couleurs. Ceux-ci sont faits sur mesure et sont parfaits. livrer partout en europe. et livré rapidement
kunststofplaten.be/product/geel-alupanel-3-mm/
@@PhilippeRommens merci beaucoup, est-ce que ça protège bien ? Ça ne risque pas de prendre feu ce matériau ?
l'extérieur est en aluminium !!!!!
@@PhilippeRommens ah d’accord, la brillance de l’aluminium ne risque pas de refléter le faisceau laser ? Désolé d’insister mais je me dois d’être certain car la machine sera dans un labo où des enfants peuvent être présents. :)
les panneaux en aluminium ont un côté mat et un côté brillant. les fenêtres en acrylique à travers lesquelles vous pouvez voir sont d'une couleur qui laisse passer le moins de lumière possible. voir site internet : kunststofplaten.be/plexiglas-platen/plexiglas-platen-getint/
cependant, on n'est pas autorisé à le regarder sans lunettes laser. ceci pour la sécurité. de plus, il ne faut jamais laisser un laser en fonctionnement seul dans une pièce, quelqu'un doit toujours être présent. les morceaux que vous éditez peuvent toujours graver. sécurité pour tout
Could i use this to build a 1200x600 if i scaled things up
Yes you can, al the aluprofile in x en y + demension you want
I've been doing the math for this total project and it doesn't pay to do it because a 7050 80w machine costs 1800€ and this project exceeds 2000€.
I am busy doing a similar build and so far it's cost2400 but I'm doing an 80w 900x900 and to buy an machine with those specs will cost alot more.
Hi what is the final price of this diy building ? Thank you
I builded 90x60 on the grbl driver, without the box. The price was about 800 eur. In this price are aluminium profiles, stepper motors, bolts, nuts, aluminium connectors, 50W Co2 tube, power supply for steppers, GRBL controller, cooling parts, air pump etc. The aluminium profiles and linear rails were most expensive - about 350 eur. Everything was buying on aliexpress.
Hoeveel heeft dit project uiteindelijk gekost ?
De prijs is voor iedereen zeer verschillend, waar koop je het materiaal, vb: je kan een lasertherapie 80watt voor €295 kopen maar ook voor een 80watt €700 betalen. Liniaal rails budget of top kwaliteit enz.... controller types, drivers, teveel om op te noemen. Invoertaksen of geluk geen taxen. Deze varieert van € 1250 tot €2500. Ik had zelf al veel materiaal liggen van een voorgaand project.
Welk type Ruida controller is dit precies?
ruida rdc6445s
What are the dimensions of the machine in Total?
Depends of the lasertube. Between 800mm x 1100mm (1250mm, 1500mm......) hight 420mm
looks pretty much like a copy of lasersaur