ford explorer. flax 3.5L/3.7L water pump replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ต.ค. 2024

ความคิดเห็น • 29

  • @Rebmetpes4
    @Rebmetpes4 8 หลายเดือนก่อน +1

    O goodness THANK YOU! FOR JUST CHANGING THE WATER PUMP ONLY!

    • @Autoenginecheck
      @Autoenginecheck  8 หลายเดือนก่อน

      No sir leak work

    • @4142Wilb
      @4142Wilb 2 หลายเดือนก่อน

      C L S all in one - dude breaks it down on how to do it yourself. I’m like 70% of the way, just waiting on new VVT solenoids, O2 sensors, radiator hoses and alternator to come in and replace at 166k plus miles, new from 2017.

  • @4142Wilb
    @4142Wilb 2 หลายเดือนก่อน

    I just pulled my water pump from a Ford Explorer, why does the pump have gasket sealant applied over the rubber gasket? Mind you this was bought new not used and first time changed at 166,769 miles.

  • @selfdefender8609
    @selfdefender8609 9 หลายเดือนก่อน +1

    Very understandable. To the point.

  • @RodrigueBouchang
    @RodrigueBouchang 2 วันที่ผ่านมา

    Comment connaître que le premier piston es en haut

  • @JavierMandujano-mn9hs
    @JavierMandujano-mn9hs ปีที่แล้ว

    Que buen video.muchas gracias por compartirlo.bendiciones.

  • @FrankGojon
    @FrankGojon 6 หลายเดือนก่อน

    Excelente trabajo Amigo

  • @ricardolopez1874
    @ricardolopez1874 3 หลายเดือนก่อน

    Gracias

  • @alexabu8840
    @alexabu8840 11 หลายเดือนก่อน +4

    Is easy when the engine is down

  • @markmeador
    @markmeador 3 หลายเดือนก่อน +1

    Same crappy design on all Ford 3.5 and 3.7 V6’s. I have a 2013 Ford Edge and haven’t had a failure but I change oil every 5000 miles and change the coolant every 3 years or 36,000 miles. I am so paranoid about this problem I check the oil and coolant before I drive this car(every day).

    • @Autoenginecheck
      @Autoenginecheck  2 หลายเดือนก่อน

      Good job

    • @willmann30
      @willmann30 หลายเดือนก่อน

      I changed the oil and coolant just like you did. I stayed on top of it. And then one day out of nowhere the engine oil and coolant mixed and over capacitated the block. I only discovered this after engine shut down. No check engine light, no over heat, it just died like a dead battery/bad alternator. Check battery voltage at 12.8. pulled the dipstick and it was at the top. Milky. That Duratec engine is garbage at 89k miles. Dealer is replacing it for $14,000.

  • @joshuamoore8414
    @joshuamoore8414 11 หลายเดือนก่อน +3

    So stupid worst design ever and I have the truck I’d Neva buy another 1 with this damn motor

  • @davidfrank6666
    @davidfrank6666 ปีที่แล้ว +5

    easy, just 1500 dollars.

    • @10percent48
      @10percent48 10 หลายเดือนก่อน

      I just did one for 1200. Was pretty easy 😊

    • @hahagteeem5532
      @hahagteeem5532 2 หลายเดือนก่อน

      Man luckily the mechanic my boy and I got done for 650🙏

    • @willmann30
      @willmann30 หลายเดือนก่อน

      The dealership is replacing my engine because of the intermix. 2014 Mazda CX9 3.7. $14,000

  • @mikeclement5383
    @mikeclement5383 9 หลายเดือนก่อน +1

    Lots of work for a water pump.

  • @Sean0526a
    @Sean0526a หลายเดือนก่อน

    I hope the engine was out for some other reason. It's certainly not necessary for this job.

    • @Autoenginecheck
      @Autoenginecheck  หลายเดือนก่อน

      Yes sir
      It’s leak work all suspension and bampar change

  • @ConcepcionJaimes-pq6j
    @ConcepcionJaimes-pq6j หลายเดือนก่อน

    Va

  • @ferdamravenec4326
    @ferdamravenec4326 5 หลายเดือนก่อน

    sehr kompliziert!!!🤔🤔🤔🤔🤔🤔🤔🤔