it seems like it's really struggling to get up onto a plane. Does the hull have steps? if not adding some might help. also, the motor rpm sounds really high witch to me indicates the need for a more aggressive or possibly larger propellor. this might give the boat the extra top-end speed to get up planning. just a thought! the boat looks really neat!
Man I’m trying to fabricate sponsons but I need them about 54’ long and 16” tall, the angles to get the gaps closed are kicking my butt. Going grip a ton of cardboard and razor knife blades. This is the best video I’ve found after about 30 hours of researching sponson designs. I’m making a mold from heavy cardboard taping off all lines where joins and pouring flotation foam into it to make shape of sponson then 3 layers of glass 2 layers gel coat to make a catamaran style little shallow water boat with a trolling motor 86lb thrust. But may hv to go to simpler pattern but damn sure like this one thanks
Amazing work. The boat looks awesome. It appears tho your water cooling wasnt working. When the camera was facing the rear there was not any water streams shooting out of either side of the boat.
Süper gerçekten elinize sağlık sadece ağırlık merkezinin daha önde olması gerekiyor sanırım, tam güçte ya da rüzgar dalga vs gibi dış etkenlerde önden aldığı hava akımıyla takla atabilir gibi,üst hava oluğu da gövde üzerine enlemesine yayvanlaştırılırsa aerodinamik olarak daha da harika olur acizane düşüncem
Very Cool my friend;I luv'd going thru the steps from "Start to Finish" with U. Thanku for Sharing Your Craftsmanship;It's inspiring! Best of luck on Future Projects Bruh! ✌
Great looking boat - struggling a bit to get up on the plane, ploughing a bit through the water. Almost certainly too heavy, if you remove some stuff it will get up on plane and your speed will double. Remove the water pump (the water pickups are self pressurising), all the aluminium parts on the transom except the rudder, move a single turn fin to the back of the right sponsor, remove all the cosmetic stuff on top (air intakes etc) and thrn get rid of as much of the stuff as you can inside the boat. Finally move your batteries is far forward as possible, you want the cog at about the level of the back of thr sponsors. That way you won't need to add weight to the front to stop it from flipping. Your build looks awesome, a few minor changes and it will fly!!!
Excellent build now make a nice ramp about ten inches wide and three feet long a ramp to when finished power up enough to have your boat run up on it for a finale. Just a cool touch to a days fun .
в боковых спонсонах или поплавках используйте вместо шпангоутов просто плотный пенопласт и его уже обклеивайте листами фанеры, дерева, картона, стеклоткани как угодно. намного легче прочность достаточная даже для гонки и плюс при аварии непотопляемость
Hey bro that was an amazing build a few things that I noticed that you can fix to improve the speed one is where your strut holder is located there is a gap which allows water to flow into your stuff into which will cause friction and will make you lose momentum that's why the boat sounds really loud but it is not going very fast also if you take out the big water pump and go with something a little smaller that's going to reduce the weight which would increase your miles per hour
Выглядит лучше, чем плавает. Очень тяжёлый. Винт подобран неправильно. Возможно и глубина его погружения тоже неправильная. Вот, как надо делать. 4S: th-cam.com/video/WfcAJrAXjk0/w-d-xo.html 3S: th-cam.com/video/38Xbsve2c58/w-d-xo.html
May I know sir do you also sell those items that you make like a boat and if you sell it how much do you think? Thank you I’m your subscriber and I’m really amaze how you assemble it from start to finish, again thank you
Hi, nice boat. Have you tested how fast it can go? And how sturdy is the boat with the design and materials used? Also, what are the dimensions of the boat when it is finished?
Hello, I improvised the boat. Unfortunately, there is no plan and drawing. I shaped it by watching photos and videos on the Internet. Since there is a lot of demand, I do it by using and sharing plans for the next boat models.
Interessante la costruzione. Ma come mai usi la colla a caldo e non usi la colla dedicata al ciano acrilico? Avrei bisogno di consigli per il montaggio di un kit di motoscafo. NON ci sono istruzioni dettagliate. Grazie mille.
I see that you cut your wood in a single move, Me I have to cut my balsa wood with my cutter at least 5 times, do you have a specific tool ? do you apply lot of strenght ? what is the thickness of your wood ? I am dealing with 3mm
great rc catamaran boat
Thank you
Woww, keren sekali aah video nya
terima kasih atas komentar yang bagus
Bu kadar yetenekli insanları değerlendirmek lazım
Amazing work, buddy! Fantastic boat!!! 👍
Thank you bro
Wow very nice bro
Thank you bro ❤️
Milyonlarca izlenme alması gereken bir video 👏🏻👏🏻
Teşekkür ederim dostum
Sadece biraz yavaş. Onun dışında gayet iyi. Ben de bu tarz videolar yapıyorum. Başarılar.
Bir saniyesini bile sarmadan izletti, inanılmaz emek var, bilgi var, sonuç muhteşem, ellerinize sağlık, bir sonraki videoyu iple çekiyorum..
Çok teşekkürler
Alet işler el övünür sözünü lügatımdan sildim bu çalışmadan sonra eline emeğine sağlık büyük beceri 👌👍
teşekkürler
Siz daha iyisini yapana kadar en iyisi bu 👊🏼👊🏼👊🏼 ⚡️ ⚡️ ⚡️
teşekkürler
Fast and furious!
That is one sweet boat
Thanks for your nice comment. Your channel is so good I subscribed
@@CraftChannelYT Thank you buddy.. RC pal..I like yours also
İzlemesi bile çok keyifli 👍
The besty i have ever seen 🔥
Thank You
ellerine sağlık çok güzel olmuş
başarı bir iş çıkarmışsın müthişş
Güzel yorumunuz için teşekkür ederim.
Erhan baba yaptın gene yapacağını süper olmuş emeğine sağlık 🧿👍🏼
Teşekkür ederim
One of the best
Thank you
Very nice
Thank you bro
Paylaşımlarınızı merakla bekliyorum ve videoları heyecanla izliyorum. Videoların devamını bekliyoruuuzzzz 🌸 🌸 🌸
Sehr schöne Arbeit, sowas nenne ich Modellbau .
Danke für deinen netten Kommentar
Muhteşem bir yetenek
Çok eğlenceli görünüyor,eline sağlık
Teşekkürler
Emeğinize sağlık süper olmuç, rc araba kumandası kullansanız daha hoş olurmuş sanki ama yinede proje süper.
Tebrik etmek lazım çok özverili ve kaliteli bir çalışma olmuş
teşekkürler
мечта сделать подобное!! молодец!!!
спасибо за ваш хороший комментарий
Siz daha iyisini yapana kadar en iyisi bu 👊🏼👊🏼👊🏼 ⚡️⚡️⚡️
Güzel bir çalışma olmuş emeğinize sağlık başarıların devamını dilerim 🙏
it seems like it's really struggling to get up onto a plane. Does the hull have steps? if not adding some might help. also, the motor rpm sounds really high
witch to me indicates the need for a more aggressive or possibly larger propellor. this might give the boat the extra top-end speed to get up planning. just a thought! the boat looks really neat!
Emeğinize sağlık muhteşem olmuş
teşekkürler
Push 35lbs+ and still goes? Good Job!!!
Elinize emeğinize sağlık bu kadar güzelini ve mükemmelini görmemıstım Bir an önce sizinle irtibata geçmeyi düşünüyorum 👏👏👏
teşekkürler
Che velocità hai ottenuto? Grande lavoro. Bravo
Non ho usato un tachimetro. Grazie per il commento
Wow.
Thanks
muhteşem tebrikler 👏🏻👏🏻👏🏻
İyi iş abi bir sonraki projeni sabırsızlıkla bekliyoruz.emeğine sağlık
Man I’m trying to fabricate sponsons but I need them about 54’ long and 16” tall, the angles to get the gaps closed are kicking my butt. Going grip a ton of cardboard and razor knife blades. This is the best video I’ve found after about 30 hours of researching sponson designs. I’m making a mold from heavy cardboard taping off all lines where joins and pouring flotation foam into it to make shape of sponson then 3 layers of glass 2 layers gel coat to make a catamaran style little shallow water boat with a trolling motor 86lb thrust. But may hv to go to simpler pattern but damn sure like this one thanks
Muhteşem 👐👍👍
Super making, super video, super infos!
thank you
Bundan sonraki her proje son şampiyon 👍🔥🔥🔥🔥🔥🔥
Tek kelime ile muhteşem, tebrikler👍👍👍
teşekkürler
sehr gut ! ich würde die kamera steuerbar machen !
Waoww
teşekkürler
Amazing work. The boat looks awesome. It appears tho your water cooling wasnt working. When the camera was facing the rear there was not any water streams shooting out of either side of the boat.
Wonderful boat bro👍✌️🔥
teknenin hızı harika
↪️TECHNO INNOVATORS
Thank you bro ❤️
Süper gerçekten elinize sağlık sadece ağırlık merkezinin daha önde olması gerekiyor sanırım, tam güçte ya da rüzgar dalga vs gibi dış etkenlerde önden aldığı hava akımıyla takla atabilir gibi,üst hava oluğu da gövde üzerine enlemesine yayvanlaştırılırsa aerodinamik olarak daha da harika olur acizane düşüncem
Güzel yorumunuz için teşekkürler
sıvı sogutmalı birde ellerine sağlık harika olmuş dostum :)
Güzel yorumun için teşekkürler
veramente stupendo
Grazie
Tek kelimeyle HA Rİ KA.Emeğinize sağlık
Very Cool my friend;I luv'd going thru the steps from "Start to Finish" with U. Thanku for Sharing Your Craftsmanship;It's inspiring! Best of luck on Future Projects Bruh! ✌
those fish were like?
Yo! did you see that “ufo”
bro it was an unidentified floating object up there!
Did you see it?
Cok iyi ne bicim gidiyor jet gibi
Great looking boat - struggling a bit to get up on the plane, ploughing a bit through the water. Almost certainly too heavy, if you remove some stuff it will get up on plane and your speed will double. Remove the water pump (the water pickups are self pressurising), all the aluminium parts on the transom except the rudder, move a single turn fin to the back of the right sponsor, remove all the cosmetic stuff on top (air intakes etc) and thrn get rid of as much of the stuff as you can inside the boat. Finally move your batteries is far forward as possible, you want the cog at about the level of the back of thr sponsors. That way you won't need to add weight to the front to stop it from flipping. Your build looks awesome, a few minor changes and it will fly!!!
Just saw your newer videos!, come a long way!
Ma c’è un progetto per dimensioni e parti? Comunque progetto magnifico, non ho mai visto niente di così bello
Hello do you use a 'wood hardener' ? And could you explain the process you follow to waterproof your boat ?
I use waterproof epoxy
경험상 프라스틱 스쿠류는 부하를 많이 받으면 펴지는 경향이 있습니다. 쇠로된거로 추천 드립니다
What's the very first song in this video? Both songs listed are not it. Kool boat, very talented! 👍
Класс.👍👍👍👍👍
Arkaya kafa şişiren müzikler koymasan daha iyi olur, atölyenin seslerini tercih ederim.
Excellent build now make a nice ramp about ten inches wide and three feet long a ramp to when finished power up enough to have your boat run up on it for a finale. Just a cool touch to a days fun .
Thanks for your nice comment
Beautiful build, the only thing I would have done differently would have been to lacquer the body and given it a mirror finish but well done 👍👍👍
Thanks for the nice comment
в боковых спонсонах или поплавках используйте вместо шпангоутов просто плотный пенопласт и его уже обклеивайте листами фанеры, дерева, картона, стеклоткани как угодно. намного легче прочность достаточная даже для гонки и плюс при аварии непотопляемость
Hey bro that was an amazing build a few things that I noticed that you can fix to improve the speed one is where your strut holder is located there is a gap which allows water to flow into your stuff into which will cause friction and will make you lose momentum that's why the boat sounds really loud but it is not going very fast also if you take out the big water pump and go with something a little smaller that's going to reduce the weight which would increase your miles per hour
👍👍👍👍👍👍👍👍
you should top speep
Thank You
I think its better the 2 engine sir😊
You are right :)
So cool! Could you give us the plans?
Hello, unfortunately this boat has no plans. I built it impromptu while shooting video.
Hallo where do find the mall´s
Have you made yourself those thank you
Good video
Catamaran show
waar koop je je activator spray? ik heb altijd van die kleine busjes
helloo..before putty..u apply fiber resin?
Nice work...how much money cost all the parts?
thank you. I have given the information and purchase links of all the parts in the description line.
Boy does that need a better prop!
my work continues
Выглядит лучше, чем плавает. Очень тяжёлый. Винт подобран неправильно. Возможно и глубина его погружения тоже неправильная.
Вот, как надо делать. 4S: th-cam.com/video/WfcAJrAXjk0/w-d-xo.html
3S: th-cam.com/video/38Xbsve2c58/w-d-xo.html
Which glue did you use to join the wood?
waterprof epoxy
Stupendo 👍
Grazie
Me gustaría comprar una como esa para el mar, vivo en la florida USA
Can you tell me what kind of wood you use
balsa and pine
Can you please build 60inch catamaran boat with 2 x4092 motor aand 2x120a ESC and 2x6s = 12s and with metall propeller please
I will wait 🙏🙏
next video 120A 2 esc with 2 motors and 36 "rc boat with metal propellers please stay tuned
@@CraftChannelYT hey 36inch will be smaller I think can you make a big boat like 50inch
@@CraftChannelYT oh that sounds great, I can't wait
How do you figure to cut the strips for the sponsons so accurately?
Hi bro!! Loved the video! Is it possible for you to share the plans with me and can i scale it down to around 50cm length?
Hallo what fir kind of wood do you use thank you
Que material utiliza para el barco
árbol de balsa
Um trabalho muito caprichoso.
plaz agein boat foms bot
załóż większą śrubę napędową np.52mm 3łopaty...mam ten sam silnik i uwierz mi,że robi ta śruba dobrą robotę,przez co łódź płynie szybciej
🖒🖒🖒🖒🖒🖒👏👏👏👏👏👏
Erhan bey takipleşelim mi? Birbirimize faydamız olur?
Tabiki olur
May I know sir do you also sell those items that you make like a boat and if you sell it how much do you think? Thank you I’m your subscriber and I’m really amaze how you assemble it from start to finish, again thank you
How about a water jet thruster sir?😊
Hi, nice boat. Have you tested how fast it can go? And how sturdy is the boat with the design and materials used? Also, what are the dimensions of the boat when it is finished?
Aijsjsks
Hi bos.... Can share yhe drawing?
Hello, I improvised the boat. Unfortunately, there is no plan and drawing. I shaped it by watching photos and videos on the Internet. Since there is a lot of demand, I do it by using and sharing plans for the next boat models.
12s넣고 기어가네.....그냥 완구를사는게 좋겠네
you makeing a static display or something that s for use in water its to heavy
yes it was heavier than i expected
@@CraftChannelYT don't get me wrong it's a good design but try to use 1mm ply wood and micro ball in fiber resin light and strong
als het allemaal zo simpel is
İzmir'de neredesin usta?
Göztepedeyim
Interessante la costruzione. Ma come mai usi la colla a caldo e non usi la colla dedicata al ciano acrilico? Avrei bisogno di consigli per il montaggio di un kit di motoscafo. NON ci sono istruzioni dettagliate. Grazie mille.
Hi we're are you from
hi i like to keep it private
@@CraftChannelYT please tell i am from pakistan
Is there a plans that we can order
Is there a plans that we can order
How much $$ to make me one? Great work by the way bro
Thank you for your nice comment. I do it for hobby purposes. Not for sale unfortunately
What wood you use and how thick is the wood Asome work
I see that you cut your wood in a single move, Me I have to cut my balsa wood with my cutter at least 5 times, do you have a specific tool ? do you apply lot of strenght ? what is the thickness of your wood ? I am dealing with 3mm
I cut it in 4-5 moves. I crop it in the assembly part so that the video does not stretch
@@CraftChannelYT ah ah!
@@CraftChannelYT and which thickness? For the wood do you use?