Current sales links are available here! -s.click.aliexpress.com/e/_DEKJarD -s.click.aliexpress.com/e/_DCMeEMF -s.click.aliexpress.com/e/_DCsMold -s.click.aliexpress.com/e/_DFmI2r1
80s flash back minus the Nitro. I always drooled over this kit as a kid. A guy living close had a Circus Circus as a wall orniment in his room. It was probably best. Expecting a kid to start and maintain a nitro set up wouldn't have worked out. Several years ago I built the Graupner " Systems" cat. I installed a brushed motor big as a beer can and eventually had it running on over 50 volts of NiCad Packs. It weighed a ton but eventually was running mid 40 mph. Boats are fun because they don't break as often as as flying or car RCs.
Years back I built a few hydroplanes, much the same technique, the last one I mixed in some walnut inlays, so steady were my hands so clear my vision, the wood was matted in a seamless appearance. I was quite proud of it. It sat about on a shelf collecting dust for 20 years, then was lost in a move. A good memory as I watch you fit each piece in place. Were I to build one today, I would do the Camel cigarettes, Joe Camel boat, it was fast and gave miss budwiser a fun for her money, until budwiser crashed into her. Oops. Congratulations on a fine bitvof building and thanks for sharing .take care.
Harika mükemmel 👍👍👍👍 sürekli yeni video yüklediniz mi diye sayfanıza bakıp duruyordum. Ellerinize sağlık yine her zaman ki gibi süper bir video olmuş 👏👏👏
Bought plans for the smoking Joe's like 10 years ago. Cut the parts out and had a hard time fitting the together. This gives me some hope that I can give it another go. Very nice build 👍🏻
That was so nice you building that from scratch and a lot bigger than I thought.I built many fishing bait boats in about 20-years I’ve built 56 sold many built some to how the customer wanted camera hard wired fish Finder.I would love to build the boat you just built but I would need the planes if I spell it right I’m not the world’s best speller.but the nice watching you beautiful boat sir.all the best from the UK
When I was a kid in Evansville Indiana the company my Dad worked for provided cranes for Atlas Van Lines hydroplane to launch with when Chip Hanauer was driving for them. It was so cool watching them race on the river there. Beautiful boat and nice detailed build video! She looks fast!
@@CraftChannelYT I see that this is the only reply you ever make with these exact words. I won't be making any future comments. Sounds like I'm commenting to some large impersonal corporation and not a person. I look forward to reading thanks for your nice comment in reply to this one as well.
@@JustInvertedFpv There have been a lot of comments lately and I'm trying to reply to everyone. I'm sorry if I offended you. I'm jealous of you watching your real racing in the river. You are very lucky. I could only watch the real thing over the internet. I subscribed to your channel.
Neat . I never would of thought of building a Hydro out of foam board. The thru hull water pickups aren't going to do much if anything. They aren't in the water unless you put them in the sponsons. The Hydro rides on the ride pads of the sponsons and the props. The rest of the hull is out of the water.
Thanks for the nice comment. I will always continue to improve myself. I will share with you by shooting new videos with the information I have learned. Your suggestions are valuable to me. Thank you.
Impressive I like building balsa aircraft Similar structure ideas , I like your hybrid use of wood and foam board I think I’ll give this model a try one day
I used to build these for "nitro" fuel. I can just imagine how much you spent on parts for this boat, i'm guessing 600$,.. & then a lot of work to build!
Very nice build, I have the same size “oh boy oberto” beef jerky boat with Picco nitro . I absolutely love these old school boat designs . Let me know if you ever decide to sell any of your rc boats! Thanks
I am rebuilding the king of shave gas. Rc boat I need to replace the windshield on it where could I get one or what could I use I enjoy your video's and the good information thanks 👍👍
I have a project underway that could use this idea of (2) 3650 2000 Kva. Props you suggested are no longer avaible from Alieexpress. Could you tell me which propeller that you used ) size? I favor the Octura X437/ 3r and X437/ 3L to run with the 3650's 1800 Kva using 11.1 Lipo. After running your're current boat, would you change anything of the drive system? What is the finished weight of your boat? Do you have any vibration issues? Do you really think you need two turn fins?
ABSOLUTELY BEAUTIFUL !!! super nice work man and thank you so much for sharing the build.. even just watching you build is therapy lol thanks again and glad I sub'd ya.. !
THESE BOATS HAVE A SINGLE PROP THATS ON AN OFFSET MOUNTED SHAFT! THE REASON BEING FOR TIGHTER TURNS! THESE BOATS DID NOT RUN TWIN PROPS LIKE THE OPEN WATER CIGARETT BOATS! THE HYDROS ARE OVAL CORSE RACE BOATS NOT DRAG BOATS!
Hello, Thank you for the nice comment. I do it experimentally and try to learn new things. Your comments are valuable to me and I will consider them. Thank you
Hi, I am planning to build this boat. Can you let me know in what format you downloaded the plans, what paper size you used to print the origional size. Thank you so much.
Current sales links are available here!
-s.click.aliexpress.com/e/_DEKJarD
-s.click.aliexpress.com/e/_DCMeEMF
-s.click.aliexpress.com/e/_DCsMold
-s.click.aliexpress.com/e/_DFmI2r1
80s flash back minus the Nitro. I always drooled over this kit as a kid. A guy living close had a Circus Circus as a wall orniment in his room. It was probably best. Expecting a kid to start and maintain a nitro set up wouldn't have worked out. Several years ago I built the Graupner " Systems" cat. I installed a brushed motor big as a beer can and eventually had it running on over 50 volts of NiCad Packs. It weighed a ton but eventually was running mid 40 mph. Boats are fun because they don't break as often as as flying or car RCs.
Hello, Thank you for the nice comment. I'm also thinking of making a nitro engine boat soon.
Years back I built a few hydroplanes, much the same technique, the last one I mixed in some walnut inlays, so steady were my hands so clear my vision, the wood was matted in a seamless appearance. I was quite proud of it. It sat about on a shelf collecting dust for 20 years, then was lost in a move. A good memory as I watch you fit each piece in place. Were I to build one today, I would do the Camel cigarettes, Joe Camel boat, it was fast and gave miss budwiser a fun for her money, until budwiser crashed into her. Oops. Congratulations on a fine bitvof building and thanks for sharing .take care.
Thanks for the nice comment. I will consider your suggestion in future videos.
Breathing exercises and meditation, along with correct breathing practices will help you regain steady hands 🤏😌🤌 never stop doing what you love!
수중🎏🧨🎆✨⛸✨🎑비헹항공알시
Mntap kawan semangat terus hadir buatnya keren inovasi baru hadir nyimak
Terima kasih atas komentar yang bagus
Bundan daha iyisi olamaz dediğimde,hep beni yanıltıyorsunuz. Emeğinize sağlık
Güzel yorumunuz için teşekkürler.
Wowww..
Harika bir çalışma olmuş emeğinize sağlık 🙏🏻🙏🏻🙏🏻
Güzel yorumlarınız için teşekkürler
I would like to see Budweiser boat..it is my dream boat ^-^
Bu işte çığır aşmak diye buna denir işte… Emeklerinize sağlık
Güzel yorumlarınız için teşekkürler.
Harika mükemmel 👍👍👍👍 sürekli yeni video yüklediniz mi diye sayfanıza bakıp duruyordum.
Ellerinize sağlık yine her zaman ki gibi süper bir video olmuş 👏👏👏
Güzel yorumunuz için teşekkürler.
Bought plans for the smoking Joe's like 10 years ago. Cut the parts out and had a hard time fitting the together. This gives me some hope that I can give it another go. Very nice build 👍🏻
Thanks for the nice comment. I'm always here if you need help.
Wow....fantastic!
Nice and so fast. 👍👍
Benim gibi 40li yaslardaki ÇOCUK lar icin ruyalari susleyen cinsten olmus yine, ellerinjze saglik abim 🧿💥🚀
Güzel yorumunuz için teşekkürler.
Her bir çalışmamızın formülünü buldum
Tutku + Emek = Eser 😉
Muhteşem elinize sağlık
Güzel yorumunuz için teşekkürler
Cvok iyi bir çalışma daha teprikler müthişti
Güzel yorumunuz için teşekkürler.
Bu iş böyle yapılır daha üstü yok , herkesin eline sağlık müthiş!!
Desteklerin ve güzel yorumun için teşekkürler dostum
Very orsum, not only a great build and spoiler design, but she is very fast and looks great. I glad this popped up for me to watch 👍🏻
Thank you for your nice comment and support.
That was so nice you building that from scratch and a lot bigger than I thought.I built many fishing bait boats in about 20-years I’ve built 56 sold many built some to how the customer wanted camera hard wired fish Finder.I would love to build the boat you just built but I would need the planes if I spell it right I’m not the world’s best speller.but the nice watching you beautiful boat sir.all the best from the UK
İzlemekten keyif aldıgım bir çalışma daha olmuş muazzam tebrikler👏👏👏
Güzel yorumunuz için teşekkürler.
When I was a kid in Evansville Indiana the company my Dad worked for provided cranes for Atlas Van Lines hydroplane to launch with when Chip Hanauer was driving for them. It was so cool watching them race on the river there. Beautiful boat and nice detailed build video! She looks fast!
Thanks for your nice comment
@@CraftChannelYT I see that this is the only reply you ever make with these exact words. I won't be making any future comments. Sounds like I'm commenting to some large impersonal corporation and not a person. I look forward to reading thanks for your nice comment in reply to this one as well.
@@JustInvertedFpv There have been a lot of comments lately and I'm trying to reply to everyone. I'm sorry if I offended you. I'm jealous of you watching your real racing in the river. You are very lucky. I could only watch the real thing over the internet. I subscribed to your channel.
@JustInverted Fpv _who hurt you?_
@@moretrash4you Nobody it's just funny if you look at the replies nearly all of them are exactly the same like copy and paste. Just pointing that out
Very impressed from a long time gas boat racer 👍
Yine harika bir çalışma olmuş,ellerine sağlık tebrik ediyorum seni…
Güzel yorumlarınız için teşekkürler.
Muhteşem harika bir çalışma
Güzel yorumunuz için teşekkürler.
Muhteşem, herzamanki gibi 👏👏👏
Güzel yorumlarınız için teşekkürler.
Elinize emeğinize sağlık harika olmuş
Güzel yorumlarınız için teşekkürler.
Mükemmel bir çalışma başarıların devamını dilerim 🙏
Güzel yorumlarınız için teşekkürler.
Man, If had that CNC machine I can make anything as well.. LOL
Thanks for your nice comment
Dziękujemy.
My dad owned/raced full size catamarans. I have seen boats flip like that with disastrous results
You are very lucky to see a real catamaran boat. I am jealous of you
Simply in one word....."Awesome".
Thanks for the nice comment my friend.
Demekki aşırı hız yapmamak lazım 👍🏼
Güzel yorumunuz için teşekkürler.
Mükemmel tasarım
Güzel yorum ve desteğin için teşekkür ederim.
It's amazing, amazed by the ingenuity👍👍👍
Thanks for the nice comment my friend.
Если бы не грохот музыки,ролик можно было смотреть...
Спасибо за хороший комментарий. Я рассмотрю ваше предложение и смонтирую более тщательно в следующих видео.
Neat . I never would of thought of building a Hydro out of foam board. The thru hull water pickups aren't going to do much if anything. They aren't in the water unless you put them in the sponsons. The Hydro rides on the ride pads of the sponsons and the props. The rest of the hull is out of the water.
Thanks for the nice comment. I will always continue to improve myself. I will share with you by shooting new videos with the information I have learned. Your suggestions are valuable to me. Thank you.
Maşaallah çok başarılı bir çalışma,tebrikler…
Güzel yorumunuz için teşekkürler.
Maşallah elinize sağlık jilet
Güzel yorumunuz için teşekkürler.
ΤΕΛΕΙΑ ΚΑΤΑΣΚΕΥΗ ΚΑΙ ΠΛΕΥΣΕΙ ΜΠΡΑΒΟ ΣΑΣ ΝΕΟΣ ΣΥΝΔΡΟΜΙΤΗΣ
Impressive
I like building balsa aircraft
Similar structure ideas , I like your hybrid use of wood and foam board
I think I’ll give this model a try one day
Thanks for the nice comment. I'm here if you need help
КЛАССНО
Never seen this method before. Nice job though 😎😎😎💪💪💪💪
Thanks for the nice comment
Cok başarılı super
Güzel yorumunuz için teşekkürler.
Bu emeğe şapka çıkarırım ellerine sağlık 🙏🏻🙏🏻
Awesome Boat !!!
Thanks for the nice comment
Nice build. Looks like the new spoiler design did the trick. That thing rips 🔥
Thanks for your nice comments
your creativity is great bro
Thank you brother for supporting me and for the nice comment.
Bu adamlar işinde bir numara
Güzel yorumunuz için teşekkürler.
Çok beğendim. Yeni videoları bekliyoruz.
Güzel yorumlarınız için teşekkürler.
The Best!!!
Thanks for your nice comments
Beautiful beautiful beast. I'm impressed. Stay fast and enjoy from Italy
👌👌👏👏
Güzel yorumunuz için teşekkürler.
Wow amazing beautiful idea 👌✌️ thanks my friend
👋👋👋
Thanks for the nice comment
Süper 👍
Güzel yorumlarınız için teşekkürler.
Нормальный заплыв. Normal swim.
I used to build these for "nitro" fuel. I can just imagine how much you spent on parts for this boat, i'm guessing 600$,.. & then a lot of work to build!
Thanks for your nice comments
That’s awesome 👏 really nice job 👍
Thanks for the nice comment
Wow.. awesome. 💥💥👍👍
Thanks for your nice comments
Muhteşem
Güzel yorumlarınız için teşekkürler.
Man i was praying that was a 3D printed boat! big fan of printed boats lol! maybe you could do one some day ?? lol as always great video!
Great Job!!! Video production was Great!
Thanks for your nice comments
Great work it looks awesome and it rips. Rip on 👍👍
without epoxy coating and glas fibre? Only putty? hm it will not live long I think. But looks good.
Can you make an airboat??😳😳😳i want to make an airboat!!
👏🏻👏🏻👏🏻
Güzel yorumlarınız için teşekkürler.
Fantastic build. It's unique to see a hydroplane run with two props. I hope you plan on building more.
I am working on new models. I will do more.
@@CraftChannelYT Looking forward to it.
Great job
For the palne master
You are amazing dude 😃
Superb video😍
Thanks for the nice comment
Very nice build, I have the same size “oh boy oberto” beef jerky boat with Picco nitro . I absolutely love these old school boat designs .
Let me know if you ever decide to sell any of your rc boats! Thanks
Thanks for your nice comment
Gorgeous.!
Subbed & liked & best wishes from Scotland.
Thanks for your nice comment. greetings to scotland
Nice... Beautiful speedboat build
... Can you build more, like turbine
I am rebuilding the king of shave gas. Rc boat I need to replace the windshield on it where could I get one or what could I use I enjoy your video's and the good information thanks 👍👍
O.K BOAT 🛥🛥🛥🛥🛥🛥🛥
So cleanly-made, excellent boat, buddy! 😃
Thanks for the nice comment my friend.
@@CraftChannelYT Any time, friend 🙂
❤️
hi max . I just had free time today to watch his video
Wow awesome job!!
Thanks for your nice comments
Ever heard of Oxidean Marine dominator or minidom?
Hi, I hadn't heard of it before. I did research and I really liked it. I can do the same soon
@@CraftChannelYT cool! Look forward to it!
Bigger than I thought it would be
I have a project underway that could use this idea of (2) 3650 2000 Kva. Props you suggested are no longer avaible from Alieexpress. Could you tell me which propeller that you used ) size? I favor the Octura X437/ 3r and X437/ 3L to run with the 3650's 1800 Kva using 11.1 Lipo. After running your're current boat, would you change anything of the drive system? What is the finished weight of your boat? Do you have any vibration issues? Do you really think you need two turn fins?
This is a typical stall after coming into ground effect. The max speed should be reduced as a first measure.
ABSOLUTELY BEAUTIFUL !!! super nice work man and thank you so much for sharing the build.. even just watching you build is therapy lol thanks again and glad I sub'd ya.. !
Thank you for your nice comment and support. Keep following, more beautiful projects will come
Request F1 tunnel boat please...
THESE BOATS HAVE A SINGLE PROP THATS ON AN OFFSET MOUNTED SHAFT! THE REASON BEING FOR TIGHTER TURNS! THESE BOATS DID NOT RUN TWIN PROPS LIKE THE OPEN WATER CIGARETT BOATS! THE HYDROS ARE OVAL CORSE RACE BOATS NOT DRAG BOATS!
Hello, Thank you for the nice comment. I do it experimentally and try to learn new things. Your comments are valuable to me and I will consider them. Thank you
I still have the Drag-n-Fly 60 I built 45 years ago. It was my first big boat with a OPS 60. Good times. Was that plastic or a foam core?
Hi, I am planning to build this boat. Can you let me know in what format you downloaded the plans, what paper size you used to print the origional size. Thank you so much.
Hola qué tamaño de hoja usaste?
Saludos! 👋
Hi man I will know if possible the speed in the video of your hidro please. Thanks from Italy
Great video. Would you tell me what is this white material you use? PVC? Thanks.
Bác Adim cho em hỏi tên của vật liệu làm khung thuyền là gì ạ. Em đang muốn tìm hiểu về mấy cái mô hình này ạ.
Xin chào, Tên vật liệu (balsa forex)
Anh ấy là người thổ nhĩ kì bạn à . Anh ta đã dùng google dịch để nói cho bạn biết
Hi, Nice work!👍
Can not seem to download the .RAR file of the plans, does one have to open file and view it? Thank you great video.
Dosyayı kontrol ettim sorun görünmüyor. chrome://settings/cookies adresinde Drive için üçüncü taraf çerezlerine izin verildiğinden emin olun.
Abi o nasıl sürat öyle
Güzel yorumunuz için teşekkürler.
Bonjour un renseignement ou et la mousse polyuréthane merci
Класс. Из какого материала сделан корпус лодки?
How can I get them prints that is so cool
Vous utilisez quoi comme pâte pour recouvrement de la coque ??
ciao, bel video, dove posso trovare i disegni? Grazie.
I would like to buy if there is a kit or plans thank you
Hi, fantastic. Can I buy the plans?
Hola buenas de cuanto es el espesor del pvc y de la madera gracia gran canal
hola, 4mm
Gracias