This video should have way more views. I watched a couple other videos, one from a big bike channel on how to remove brakepads and they were useless. Didnt account for this setup on an ebike. I didnt want to have to remove my wheel and couldnt put the brakes in from the top. Your video saved me a headache. Subbed and liked. Absolute champion 🏆
Nice video. I really appreciate that it's short and to the point. There were several times that your hands blocked the camera, so it was kind of hard to tell what you were doing.
While mostly good i do not recommend putting liquids into the threaded holes as if you put too much you could hydraulically split the casting or strip the threads if you put too much in as you tighten the bolt. A drop on the threads of the bolt is more than enough.
No i jak te proxy sprawdziły sie? Da rade do tych mt200 zamontować klocki półmetaliczne? oczywiście przy tarczach do nich dostosowanych. Shimano twierdzi, że mt200 są kompatybilne wyłącznie z klockami żywicznymi, no ale nie widzę przeszkód żeby nie montować innych jeśli tarcza będzie odpowiednia... Świetny patent z zaciskaniem klamki trytką, dzięki!
Dały rade, szczerze mowiac nie zaglebialem sie w to, skoro produkuja klocki tego ksztaltu ktore pasuja do tych zaciskow to ja nie widze przeszkod zamontowania polmetalicznych klockow 😃
Hello awesome video one question I hope you see this I just bought mt200 1 day ago and the cable was long so I was cutting them and lost a bit of fluid and it was my first time having hydraulic brakes as well but I topped it up with baby oil because it’s lockdown here and couldn’t get brake oil and my breaks don’t feel the strongest like my wheelies won’t skid and they don’t grip the best can you find a way to fix that soultion is it of the oil I put
My rear brake is leaking the brake fluid , just changed the pads and in 8km they were oily again together with brake disc , i disassembled the rear brake and now i m searching for instruction how to overhaul it so it doesnt leak
This video should have way more views. I watched a couple other videos, one from a big bike channel on how to remove brakepads and they were useless. Didnt account for this setup on an ebike. I didnt want to have to remove my wheel and couldnt put the brakes in from the top.
Your video saved me a headache. Subbed and liked. Absolute champion 🏆
Nice video. I really appreciate that it's short and to the point. There were several times that your hands blocked the camera, so it was kind of hard to tell what you were doing.
Thanks for your comment, i will try to correct it in future ☺
While mostly good i do not recommend putting liquids into the threaded holes as if you put too much you could hydraulically split the casting or strip the threads if you put too much in as you tighten the bolt. A drop on the threads of the bolt is more than enough.
No i jak te proxy sprawdziły sie? Da rade do tych mt200 zamontować klocki półmetaliczne? oczywiście przy tarczach do nich dostosowanych. Shimano twierdzi, że mt200 są kompatybilne wyłącznie z klockami żywicznymi, no ale nie widzę przeszkód żeby nie montować innych jeśli tarcza będzie odpowiednia...
Świetny patent z zaciskaniem klamki trytką, dzięki!
Dały rade, szczerze mowiac nie zaglebialem sie w to, skoro produkuja klocki tego ksztaltu ktore pasuja do tych zaciskow to ja nie widze przeszkod zamontowania polmetalicznych klockow 😃
Thank you! :)
Nice video!! Thank you!!
i have a bike with the same brakes and they are almost silent and also plenty powerful. (would send over handles if not careful.
Hello awesome video one question I hope you see this I just bought mt200 1 day ago and the cable was long so I was cutting them and lost a bit of fluid and it was my first time having hydraulic brakes as well but I topped it up with baby oil because it’s lockdown here and couldn’t get brake oil and my breaks don’t feel the strongest like my wheelies won’t skid and they don’t grip the best can you find a way to fix that soultion is it of the oil I put
Hello Friend,
you should top up the brake fluid and at the same time bleed the brakes,
is the brake handle soft or hard when you push it in?
It’s a bit soft
Like I have to pull have way not all the way t9 the handle bars but there soft so like I can push hard but they won’t lock
@@abdulrahmanreciteation
if the handle falls, it does not resist when pressed
then you have to bleed the brakes
Ok thank you very much
Very good video. One complaint tho, use crocodile straps to secure the brake lever. Unnecessary waste of zip ties ( not mention throw away plastic.)
Yep good idea to use it too 🙂
What is the purpose of the thread glue?
Prevent protection against spontaneous unscrewing and loosening of screws due to vibration
@@lonerbikes thanks
thank you for guide
My rear brake is leaking the brake fluid , just changed the pads and in 8km they were oily again together with brake disc , i disassembled the rear brake and now i m searching for instruction how to overhaul it so it doesnt leak
.
MT 200 and MT 201 are same brakepads?
oo
Hi, can I use j03a brake pads on mt200? thanks
If it is the same shape but remember to use recommended pads for you brake disc (organic,semimetalic,metalic, etc)
Nice...😊
Guy wash your bike
You kinda got me
Nice video. Thanks!
Great bro, regards 🙂
@@lonerbikes regards from Switzerland :)