Doona Carseat Base Installation

[@Mintyfied]

Thank you so much! You saved my day. I was so sad I couldn’t figure it out and my sister is coming out of the hospital today!

[@ToolsandGadgets]

you're very much welcome 😊

[@skylerlindeen1732]

Thank you so much 😳 the TH-cam video I never knew I would need.
You wouldn’t believe how I was trying to fasten it before.

[@ToolsandGadgets]

Glad it helped!

[@JasmineFelder]

This helped a lot! Thank you so much! Easy to follow and straight to the point!!!

[@arthurrodriguez3028]

Thank you! I didn’t know how to raise the base.

[@reggiegrant3735]

Thank you!

[@ToolsandGadgets]

You're welcome 👍

[@joeperez917]

Thank you made it look easy

[@gianlu190790]

Everyone Should Have One!

[@arthurrodriguez3028]

Just a heads up. Your base looks too loose. I think the manual says it shouldn’t wiggle more than 1 inch.

[@ToolsandGadgets]

yes after the video i tightened it even more. as i cannot do it using one hand coz my other hand was holding the camera.

[@amadolarav]

I see many people complaining about the base moving. Could you really tighten it to avoid the free range and not exceed one inch?

[@myrathomson3669]

Excellent. Thank you!

[@ToolsandGadgets]

Glad i could help! 😊

[@Miguel-mb9xt]

Great!

[@emconfair]

Great video very good explanation thank you

[@JohnQ85]

Thanks, wasn't sure how to drop the base.

[@jacobharris2373]

Great video but you missed 1 step you have to run the seatbelt through the back near the blue clips 😊 but otherwise great video

[@ToolsandGadgets]

Hi there, yes that is another option if your car does not have any latch that you could hook the clip onto.

[@itsmemas8589]

Thanks for this!

[@ToolsandGadgets]

Sure thing!

[@gregorytaylor1282]

Thank you helped me out a lot!

[@ToolsandGadgets]

You're welcome, glad i could help.

[@grendelsgarage9723]

Thanks for making this video 📹 💕 🙌. One less thing to struggle through hahah.

[@ToolsandGadgets]

Glad it was helpful!

[@krazziejrboi]

Thanks

[@scarlett.debanhi.vianney9922]

Thank you

[@heygeo]

kaila man ko ani niya hehe. Great video bai!

[@ToolsandGadgets]

Hehe salamat bai

[@scottmacwatters]

That seems so loose. I’m gonna try to tighten it a lot more. With every other car seat I’ve ever installed it basically feels like part of the car and it’s hard to jiggle more than like a quarter of an inch when installed correctly.

[@ToolsandGadgets]

Yes mine on the video looks loose, because i could not tighten it using just one hand. After the video i tightened it up.

[@mrlxg357]

I did not know that there was a base for this car seat I got mines online but it didn't show a base

[@josuemartin199]

One question The base it comes with the car seat or I need to buy separated .

[@ToolsandGadgets]

the base comes with the carseat if you purchased the midnight edition, otherwise you need to purchase the base separately.

[@ducks1928]

Does the base have to be leveled exactly for it to securely lock ?

[@ToolsandGadgets]

Not needed, it will lock even though the leveler is on the RED side. But i guess they put that there for a reason, so might as well just level it to the GREEN center side.

[@anggazan]

Hi...is that base included when you buy doona or not?

[@ToolsandGadgets]

The base is included when you buy the Midnight Edition. If you purchased the regular version then you need to purchase the base separately.

[@Jy-me2lm]

Here’s my concern , if u pull it up from the front the whole base would just move up

[@ToolsandGadgets]

i dont quite understand the question, after releasing the latch you should be lifting it

[@shawnabdool7888]

Should the base/car seat be installed in the middle seat for added safety???

[@ToolsandGadgets]

If your middle seat is flat and came with a latch then you could do that, but typical middle seats have a slight bump.

[@mermaidmoney4612]

I don’t know what I’m doing wrong because all of a sudden mine won’t latch on base so I’m confused I’ve watched numerous videos and still can’t get the answer

[@ToolsandGadgets]

Try to double check if your latch system didn't jam.

[@alondraguzman230]

It happens when the straps are to loose on baby

[@rosaacosta8000]

What if my car doesn’t have laches there?

[@ToolsandGadgets]

You could use your seatbelt
Doona Carseat Base Installation, Seatbelt & Latch
th-cam.com/video/eaRag6c3KHs/w-d-xo.html

[@israelgarcia3455]

I believe you forgot a step from the manual. It says you have to use the seat belt as well.

[@tdogable]

Yeah he did skip that…

[@ssaustin21]

You're not supposed to use the latch system and a seat belt. Only one or the other.

[@queentkaaay2123]

Mine says don’t use both at the same time

[@mariaacosta6458]

So which one is safer?