ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Porsche 911 996 and Boxster 986 Headlight Switch Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 มี.ค. 2021
  • I've been having some problem with the headlights on my 2002 Porsche 911. The operation of the headlights was intermittent; sometimes one light would work, sometime no lights would come on at all. By using the high beams or fiddling with the switch, I could usually finally get both to stay lit. This flaky operation is common to these cars and even though you'll suspect a faulty headlight/lamp, it turns out the problem is with the switch. This is the replacement switch that I ordered for my car - www.amazon.com... Check to make sure whatever part you order is compatible with your car.

ความคิดเห็น • 27

  • @jimlong527
    @jimlong527 ปีที่แล้ว +1

    Welcome to the world of Porsche, it’s all good normally just little common issues.

  • @johngalt5411
    @johngalt5411 7 หลายเดือนก่อน +1

    You are a good teacher, thank you for taking the time and work to put this video together, you helped me save hundreds!!

    • @PIFDIY
      @PIFDIY  7 หลายเดือนก่อน

      Glad it helped!

  • @KidneyShanker
    @KidneyShanker 2 ปีที่แล้ว +1

    I did this today thanks to you. My switch had a lug nut to take our before taking out the last plastic ring. That was the only difference. I have a 1999 Boxster with everything in German in it. Nothing broke and it all came out easy. Same way putting it back. Thank you again for helping the novice public .

    • @PIFDIY
      @PIFDIY  2 ปีที่แล้ว

      Great, thanks for the head's up for Boxster owners!

  • @themonger42
    @themonger42 6 หลายเดือนก่อน +1

    thank you so much for uploading and sharing!

  • @JF-4444
    @JF-4444 ปีที่แล้ว +1

    I just replaced the light switch on my 2003 this morning following your directions. It all went pretty easily except I had to hunt for a long thin t20 to get the one screw out of the headlight switch well. Thanks for the great video.

    • @PIFDIY
      @PIFDIY  ปีที่แล้ว +1

      Glad it helped!

  • @lunabouch
    @lunabouch ปีที่แล้ว

    Looks like I need to replace my light switch after seeing the same issues as your car. Very helpful and much appreciated.

  • @grahamstevens958
    @grahamstevens958 9 หลายเดือนก่อน

    My 2003 Boxster lights would not turn on after 12 months after purchase. The switch was expensive so I found out how to remove the switch as I thought being an older car it probably had grease that had dried inside the switch. Used a R55 type cleaning fluid, taking the switch to its different positions numerous times adding the fluid. Sprayed a penetrating fluid in and wiped off excess. It's worked ever since, for 5 years.

  • @mjfeeney4
    @mjfeeney4 8 หลายเดือนก่อน

    Excellent instructions, replaced the switch on my 2004 996 today and the lights now work. On my 2004, the light switch cover came off after removing the 24mm nut, so I did not have to unclip the switch light assembly ( disk). Very easy to replace with these instructions.

    • @PIFDIY
      @PIFDIY  8 หลายเดือนก่อน

      Thanks for sharing your experience with your 2004!

  • @TAMAGOPORSCHE
    @TAMAGOPORSCHE 9 หลายเดือนก่อน

    数ある動画の中で1番わかりやすい手順を公開している素晴らしいマニュアル動画です
    ありがとうございます😊いつか挑戦してみます!

  • @pierrenovak4971
    @pierrenovak4971 3 ปีที่แล้ว +1

    Really enjoyed your video. Very helpful! I just purchased a 2005 996 C2 Cab and plan on doing all the eventual work myself. So far I have added a new PCCM+, new steering wheel, hacked home link 2 garage door opener, new hood and trunk struts, gas door actuator and hood actuator. I am really enjoying the car but realize that even if it is a low mileage vehicle, age is taking it’s toll. Good thing I actually enjoy doing the work, all part of the fun.

    • @PIFDIY
      @PIFDIY  3 ปีที่แล้ว

      Yeah, it feels like there is always something you can do to these cars. Even with everything sorted, there's still a "to do" list...

  • @BaByeProductions
    @BaByeProductions 3 ปีที่แล้ว +1

    Worked for me … headlights went out on 2003 996. Fixed now!! 😁

  • @davidleeroth805
    @davidleeroth805 2 ปีที่แล้ว +2

    Don't pull the cover from the top or from the right side. Just pull from the bottom.

  • @Gracievision
    @Gracievision 2 ปีที่แล้ว

    That was really helpful, thank you. I can't do the job myself but at least I know what my mechanic will be doing to fix it.

  • @tonychan4526
    @tonychan4526 3 ปีที่แล้ว

    Very diligent work!

  • @Rancidcactus
    @Rancidcactus ปีที่แล้ว +1

    Mine has the low beams not turning on every time issue. The dealer wants $460 to fix the switch. 😂 Not today Porsche, not today!

  • @expresenator
    @expresenator 3 ปีที่แล้ว

    thank you very much, managed to replace my switch expeditiously

    • @PIFDIY
      @PIFDIY  3 ปีที่แล้ว

      Great, glad it helped!

  • @nilsw.3024
    @nilsw.3024 ปีที่แล้ว

    Good day
    can you tell mor the pinout of the cables colors for the numbers? Thanks

  • @IAnonymous3
    @IAnonymous3 ปีที่แล้ว

    Anyone else have an issue with their dial not clicking into place ? My know is just pulling straight off other than that is was pretty easy. Older 996 models have a nut you have to remove for the bezel. Not the clips you just press down on….

  • @dagolopezsr2004
    @dagolopezsr2004 2 ปีที่แล้ว

    Dim light on the switch stays on all the time, is necessary to replace the switch? Tnx

  • @christame994
    @christame994 ปีที่แล้ว

    Full beam only works when flashing and not in ON position (pushing stalk forward) would this fix this?

    • @PIFDIY
      @PIFDIY  ปีที่แล้ว

      Hard to say. A flaky headlight switch can give lots of symptoms.