วีดีโอ

Great video. For the baffle you created, what material thickness did you use?

I have 3rd one on the way, 1st hose blew out after a lot of use, 2nd lasted 2 uses and blew out. They are sending out new for free just pain swapping out. I plan on adding different hose because reel is pretty strong.

More great 991.1 mods please. Your content is great! I have the same year, but w/hard top. I’ve done the Sharkwerks X-pipe and the Fister (gundo hack) bypass side mufflers. Sound is amazing! Have you considered installing an IPD Plenum? You were so close when you cleaned the throttle body haha

PIF i've watched both your videos. Good info. thank you. By any chance do you have the link to your shelf that you bought for the actual pressure washer? I looked on the other video and didn't see a link there either.

Thanks for the information ,maybe saved some people from a slow death

I have the 501R which is a 94. Mine is getting ice build up on the back of the inside of the refrigerator. Is the defrost Terminator my issue also mine is a refrigerator only.

I did exactly the same except I put flat o rings between all the connections and Teflon tape, but when I was installing the hose I rotate the wrong way and I broke the spring coil inside 😅 Guys don't do the same like me and rotate it towards the back

Nice now im gonna order on for my Golf R. I was think sport + as well

Thank you so so much sir, wonderful video

Your hitch-pin is begging to be pulled with a slight transfer of ownership...Excellent content.

Great video like the setup. Congrats

Don’t use that rotating nozzle. Use a 25-40 degree nozzle to rinse the soap off. That rotating or swirling nozzle is for removing stains n dirt from floors.

Great video and info

Thank you...your video really got me out of a bind!!

I ordered a GT2 knob for my POORSHA the other day. My 2024 Golf R. went with the 400-500 gram knob... can't wait for 2 months to have it arrive and I install it.

Great video! I have the same car as you and will be installing the Sharkwerks X Pipe on it before I take it out in the spring. I was nervous about those bolts but the C clamp technique seems like it worked well and I will give it a try!

Great vid my guy...got a new switch on order...waiting for it to arrive 2 Jan 24...can wait to get this fixed...thanks again

I have same problem, no defrosting on freezer, fan works, how much should I pay a technician to do it, I think they will want to charge me a lot when they see a subzero

can you give the link to buy the part plz?

Very helpful

2025 Kia Telluride EX X-Line w/ Tow Package doesn't come with Wires or a Hitch......... I got the cooling transmission and the tow mode but hmmm....

It’s easier just to sell the car and get a newer year at this point wow. All this for CarPlay lol

Great video. I also had to remove studs on the cats. I used a c clamp and under pressure and used a handheld propane torch and heated around the base of the stud on the flange itself. Came out easily. Nice work sir!

Highly appreciate you posting this. Your still helping fellow C7 owners🍻

How low of a clearance is there to lift lowered cars?

Nice video 😎 and please make another video for the same zuma how to fill up coolant

The gear oil should be done for the first 625 mile service

Where did u get the creeper/ chair @ the start if the video?

For anyone with the rear bumper off, unscrew the side heat shields and remove them, about 5 bolts,, Unbolt your tail pipes and remove, that way you can either swing the mufflers to the side (they swing on the bracket easy access to the plugs) or unbolt the side mufflers, 2 bolts,, both easy jobs takes around 10 mins, at that point you have full access to the spark plugs without even removing the wheels, there is no awkwardness getting them out, its straight forward,, still a helpful video though, but if you went the extra mile you'd have found it so much easier.

Great job. Nice to see what's possible and the process to get there. I'm replacing an M&SN350 in 2024....

i’m about to do the same and don’t have a windows license should i get one beforehand or should i be fine?

Having a dac is so much better than not having it... i guess the ipod input has it? Cuz theres no way naked digital audio sounds better than analog audio from digital sources.... im a little experienced in hifi so i know my audio! Feel free to ask or correct me

life would have been so easy for you doing this job if you had taken the extra 10mins to removes all the heat shields, access to everything would have made it so easy, I just used a G clamp hit it with a hammer on every bolt and replaced them, I wasn't on a ramp on the floor easy to do, with the heatshields out the way, no need for Vice set up :-), informative video made it look harder than what it was tho, ,I kept saying to myself, Remove the heat shields 🙂

Update i7 7700k z270 msi to i7 14700k z790 asus and after windows update and armourycrate updates all runs fine. Benchmarks ok, games like cyberpunk, star wars outlaws . Vs2022 check. All i want todo now is cleanup and update to w11, even when it doesnt seems a need. Well its not w98 or xp anymore. 🙂 Windows actually made some good improvements.

12:14 Good video. For people who haven't done it...They sell pw hose with 1/4 fittings, then on the other have a 1/4 to pw m22 adapter.

Thanks for your comments on Win 10. BTW Zs, gotta love'em, I have a 1990.

Well done. Does it drone at highway speeds?

on the ohlins site the data is different: the say to cut 20mm from the front boot (not 62)

I have done it both ways and never found a compelling reason to do a fresh install.

I going from asus prime-a ax b650 to a asus rog strix b650e with same cpu and dont know what i need to do if it will not delete my game files or reuse my windows ?im using same ssd drive.if someone can shed some light on this for me would help.❤

What a time to be alive.

By far the best video! Thank you very much, you motivated me to do this on my own over the weekend.

Alr hear me out i know this aint reddit but idk that neardy stuff. If i change my MBO ( form intel 10gen compatible to am4) and my CPU and i just shove in my old used SSD that has everything on it and just turn on my pc, will it work fine? Btw ill buy a gigabyte MBO.

I’ve got my right trailer brake/right turn signal light solid red all the time??

What cupholder is that?

My B460m motherboard just died. If swap it with h510m bord, Will all my data will be safe? Or i will lost them

Have you sold the old rig?

neat and purposeful...however, I'm still a sucker for Bazooka tubes and/or low profile/slim 6"-8" subs...did you take the time to add 6" squares of sound deadener for panel resonance control?

Your build is actually criminal, It hurts my eyes, probably the ugliest pc I’ve seen in years

Do you recall there being a lot of play at the clutch fork pivot point, ie being able to push and pull an 1/8"? I have quite a bit of play with mine and I can't tell if it's by design or if the ball socket and/or rubber seal are worn.